Deepak Vohra

Pro Docker

Deepak Vohra

Any source code or other supplementary material referenced by the author in this text is available to readers at www.apress.com/9781484218297 . For additional information about how to locate and download your book’s source code, go to www.apress.com/source-code/ . Readers can also access source code at SpringerLink in the Supplementary Material section for each chapter.

ISBN 978-1-4842-1829-7e-ISBN 978-1-4842-1830-3

DOI 10.1007/978-1-4842-1830-3

© Deepak Vohra 2016

Pro Docker

Managing Director: Welmoed Spahr

Lead Editor: Michelle Lowman

Technical Reviewer: Massimo Nardone

Editorial Board: Steve Anglin, Pramila Balan, Louise Corrigan, Jonathan Gennick, Robert Hutchinson, Celstin Suresh John, Michelle Lowman, James Markham, Susan McDermott, Matthew Moodie, Jeffrey Pepper, Douglas Pundick, Ben Renow-Clarke, Gwenan Spearing

Coordinating Editor: Mark Powers

Compositor: SPi Global

Indexer: SPi Global

Artist: SPi Global

For information on translations, please e-mail rights@apress.com, or visit www.apress.com .

Apress and friends of ED books may be purchased in bulk for academic, corporate, or promotional use. eBook versions and licenses are also available for most titles. For more information, reference our Special Bulk Sales–eBook Licensing web page at www.apress.com/bulk-sales .

This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. Exempted from this legal reservation are brief excerpts in connection with reviews or scholarly analysis or material supplied specifically for the purpose of being entered and executed on a computer system, for exclusive use by the purchaser of the work. Duplication of this publication or parts thereof is permitted only under the provisions of the Copyright Law of the Publisher’s location, in its current version, and permission for use must always be obtained from Springer. Permissions for use may be obtained through RightsLink at the Copyright Clearance Center. Violations are liable to prosecution under the respective Copyright Law.

Trademarked names, logos, and images may appear in this book. Rather than use a trademark symbol with every occurrence of a trademarked name, logo, or image we use the names, logos, and images only in an editorial fashion and to the benefit of the trademark owner, with no intention of infringement of the trademark. The use in this publication of trade names, trademarks, service marks, and similar terms, even if they are not identified as such, is not to be taken as an expression of opinion as to whether or not they are subject to proprietary rights.

While the advice and information in this book are believed to be true and accurate at the date of publication, neither the authors nor the editors nor the publisher can accept any legal responsibility for any errors or omissions that may be made. The publisher makes no warranty, express or implied, with respect to the material contained herein.

Distributed to the book trade worldwide by Springer Science+Business Media New York, 233 Spring Street, 6th Floor, New York, NY 10013. Phone 1-800-SPRINGER, fax (201) 348-4505, e-mail orders-ny@springer-sbm.com, or visit www.springeronline.com. Apress Media, LLC is a California LLC and the sole member (owner) is Springer Science + Business Media Finance Inc (SSBM Finance Inc). SSBM Finance Inc is a Delaware corporation.

Contents

Chapter 1:​ Hello Docker 1

Setting the Environment 2

Installing Docker on Red Hat 7 5

Uninstalling Docker 7

Installing a Specific Docker Version 7

Installing Docker on Ubuntu 7

Starting the Docker Service 8

Finding the Docker Service Status 9

Running a Docker Hello World Application 9

Downloading a Docker Image 11

Running an Application in a Docker Container 12

Listing Running Docker Containers 13

Accessing the Application Output on Command Line 14

Accessing the Application Output in a Browser 15

Stopping a Docker Container 16

Removing a Docker Container 17

Removing a Docker Image 17

Stopping the Docker Service 18

Summary 18

Chapter 2:​ Installing Linux 19

Setting the Environment 19

Downloading the Docker Image 21

Listing Docker Images 21

Running a Container in Detached Mode 22

Running a Container in Foreground 23

Listing Docker Containers 23

Finding Oracle Linux Container Information 24

Listing the Container Processes 25

Starting an Interactive Shell 26

Creating a Container 28

Stopping a Container 29

Removing a Container 29

Summary 30

Chapter 3:​ Using Oracle Database 31

Setting the Environment 31

Starting Oracle Database 33

Listing Container Logs 34

Starting SQL* Plus 36

Creating a User 37

Creating a Database Table 38

Removing Oracle Database 39

Summary 40

Chapter 4:​ Using MySQL Database 41

Setting the Environment 42

Starting MySQL Server 44

Starting MySQL CLI Shell 46

Setting the Database to Use 46

Creating a Database Table 47

Adding Table Data 47

Querying a Table 48

Listing Databases and Tables 48

Exiting TTY Terminal 49

Stopping a Docker Container 49

Starting Another MySQL Server Instance 50

Listing Docker Container Logs 54

Summary 55

Chapter 5:​ Using MongoDB 57

Setting the Environment 58

Starting MongoDB 59

Starting an Interactive Terminal 60

Starting a Mongo Shell 60

Creating a Database 63

Creating a Collection 64

Creating a Document 65

Finding Documents 66

Adding Another Document 66

Querying a Single Document 68

Dropping a Collection 69

Adding a Batch of Documents 69

Updating a Document 71

Outputting Documents as JSON 72

Making a Backup of the Data 73

Removing Documents 75

Stopping and Restarting the MongoDB Database 78

Exiting the Mongo Shell 80

Summary 80

Chapter 6:​ Using Apache Cassandra 81

Setting the Environment 82

Starting Apache Cassandra 83

Starting the TTY 84

Connecting to CQL Shell 85

Creating a Keyspace 85

Altering A Keyspace 86

Using A Keyspace 86

Creating a Table 87

Adding Table Data 87

Querying a Table 88

Deleting from a Table 89

Truncating a Table 90

Dropping A Table 90

Dropping a Keyspace 91

Exiting CQL Shell 91

Stopping Apache Cassandra 92

Starting Multiple Instances of Apache Cassandra 92

Summary 93

Chapter 7:​ Using Couchbase Server 95

Setting the Environment 95

Starting Couchbase 98

Accessing Couchbase Web Console 99

Configuring Couchbase Server Cluster 101

Adding Documents 109

Starting Interactive Terminal 114

Running Couchbase CLI Tools 114

Stopping Couchbase Server and Container 115

Summary 115

Chapter 8:​ Using Apache Hadoop 117

Setting the Environment 117

Starting Hadoop 119

Starting the Interactive Shell 120

Creating Input Files for a MapReduce Word Count Application 121

Running a MapReduce Word Count Application 124

Stopping the Hadoop Docker Container 128

Using a CDH Docker Image 128

Summary 130

Chapter 9:​ Using Apache Hive 131

Setting the Environment 131

Starting Apache Hive 132

Connecting to Beeline CLI Shell 132

Connecting to HiveServer2 133

Creating a Hive Table 135

Loading Data into the Hive Table 136

Querying Hive Table 138

Stopping Apache Hive 138

Summary 139

Chapter 10:​ Using Apache HBase 141

Setting the Environment 141

Starting CDH 143

Starting Interactive Shell 143

Starting HBase Shell 144

Creating a HBase Table 144

Listing HBase Tables 146

Getting A Single Table Row 147

Getting A Single Row Column 147

Scanning a Table 148

Stopping CDH 149

Summary 150

Chapter 11:​ Using Apache Sqoop 151

Setting the Environment 152

Starting Docker Containers 153

Starting Interactive Terminals 155

Creating a MySQL Tables 155

Adding MySQL JDBC Jar to Sqoop Classpath 160

Setting the JAVA_​HOME Environment Variable 160

Configuring Apache Hadoop 163

Importing MySQL Table Data into HDFS with Sqoop 167

Listing Data Imported into HDFS 174

Exporting from HDFS to MySQL with Sqoop 175

Querying Exported Data 181

Stopping and Removing Docker Containers 182

Summary 183

Chapter 12:​ Using Apache Kafka 185

Setting the Environment 186

Starting Docker Containers for Apache Kafka 188

Finding IP Addresses 189

Listing the Kafka Logs 190

Creating a Kafka Topic 190

Starting the Kafka Producer 191

Starting the Kafka Consumer 191

Producing and Consuming Messages 192

Stopping and Removing the Docker Containers 193

Summary 194

Chapter 13:​ Using Apache Solr 195

Setting the Environment 195

Starting Docker Container for Apache Solr Server 197

Starting the Interactive Shell 199

Logging in to the Solr Admin Console 200

Creating a Core Index 201

Loading Sample Data 204

Querying Apache Solr in Solr Admin Console 206

Querying Apache Solr using REST API Client 210

Deleting Data 214

Listing Logs 216

Stopping Apache Solr Server 217

Summary 218

Chapter 14:​ Using Apache Spark 219

Setting the Environment 219

Running the Docker Container for CDH 220

Running Apache Spark Job in yarn-cluster Mode 221

Running Apache Spark Job in yarn-client Mode 224

Running the Apache Spark Shell 226

Summary 228

Appendix A:​ Using the Amazon EC2 229

Creating an Amazon EC2 Instance 229

Creating a Key Pair 235

Starting an Amazon EC2 Instance 237

Connecting to an Amazon EC2 Instance 238

Finding the Public IP Address 240

Finding the Public DNS 240

Adding the default Security Group 244

Stopping an Amazon EC2 Instance 249

Changing the Instance Type 250

Summary 252

Index253

Contents at a Glance

About the Authorxiii

About the Technical Reviewerxv

Chapter 1:​ Hello Docker 1

Chapter 2:​ Installing Linux 19

Chapter 3:​ Using Oracle Database 31

Chapter 4:​ Using MySQL Database 41

Chapter 5:​ Using MongoDB 57

Chapter 6:​ Using Apache Cassandra 81

Chapter 7:​ Using Couchbase Server 95

Chapter 8:​ Using Apache Hadoop 117

Chapter 9:​ Using Apache Hive 131

Chapter 10:​ Using Apache HBase 141

Chapter 11:​ Using Apache Sqoop 151

Chapter 12:​ Using Apache Kafka 185

Chapter 13:​ Using Apache Solr 195

Chapter 14:​ Using Apache Spark 219

Appendix A:​ Using the Amazon EC2 229

Index253

About the Author and About the Technical Reviewer

About the Author

Deepak Vohra

is a consultant and a principal member of the NuBean.com software company. Deepak is a Sun-certified Java programmer and Web component developer. He has worked in the fields of XML, Java programming, and Java EE for over seven years. Deepak is the coauthor of Pro XML Development with Java Technology (Apress, 2006). Deepak is also the author of the JDBC 4.0 and Oracle JDeveloper for J2EE Development, Processing XML Documents with Oracle JDeveloper 11g, EJB 3.0 Database Persistence with Oracle Fusion Middleware 11g, and Java EE Development in Eclipse IDE (Packt Publishing). He also served as the technical reviewer on WebLogic: The Definitive Guide (O’Reilly Media, 2004) and Ruby Programming for the Absolute Beginner (Cengage Learning PTR, 2007).

About the Technical Reviewer

Massimo Nardone

holds a Master of Science degree in Computing Science from the University of Salerno, Italy. He worked as a PCI QSA and Senior Lead IT Security/Cloud/SCADA Architect for many years and currently works as Security, Cloud and SCADA Lead IT Architect for Hewlett Packard Enterprise. He has more than 20 years of work experience in IT including Security, SCADA, Cloud Computing, IT Infrastructure, Mobile, Security and WWW technology areas for both national and international projects. Massimo has worked as a Project Manager, Cloud/SCADA Lead IT Architect, Software Engineer, Research Engineer, Chief Security Architect, and Software Specialist. He worked as visiting lecturer and supervisor for exercises at the Networking Laboratory of the Helsinki University of Technology (Aalto University). He has been programming and teaching how to program with Perl, PHP, Java, VB, Python, C/C++ and MySQL for more than 20 years. He holds four international patents (PKI, SIP, SAML and Proxy areas).

He is the author of Pro Android Games (Apress, 2015).

Massimo dedicates his work on this book to Roberto Salvato, Roberto Franzese and Michele Romano, who are like brothers to him and are always there when he needs them.

© Deepak Vohra 2016

Deepak VohraPro Docker10.1007/978-1-4842-1830-3_1

1. Hello Docker

Deepak Vohra1 

(1)

BC, Canada

Docker is an open standards platform for developing, packaging and running portable distributed applications. Using Docker, developers and sysadmins may build, ship and run applications on any platform such as a PC, the cloud, data center or a virtual machine. Getting all the required dependencies for a software application including the code, the runtime libraries, and the system tools and libraries is often a challenge when developing and running an application. Docker simplifies the application development and execution by packaging all the required software for an application including the dependencies into a single software unit called a Docker image that may be run on any platform and environment.

What makes Docker images unique and different from virtual appliances, which are also software images (virtual machine images), is that while each virtual machine image runs on a separate guest OS, the Docker images run within the same OS kernel. Docker software runs in an isolated environment called a Docker container that includes its own filesystem and environment variables. Docker containers are isolated from each other and from the underlying OS.

A Docker container for a software application includes all that is required to run the software, and files may be copied from the host OS to a Docker container if required. As an application could require other software to develop a linked application, Docker containers may be linked, which makes the environment variables and software from another Docker container available to a Docker container.

Docker makes use of a Dockerfile to build an image. A Dockerfile consists of all the instructions such as what software to download, which commands to run, which network ports to expose, which files and directories to add to the filesystem, and which environment variables to set. A Docker image may be made an executable by providing an entrypoint. A Docker image may be built by providing a Dockerfile, or pre-built Docker images may be downloaded from the Docker Hub ( https://hub.docker.com/ ). The complete instruction set supported by Dockerfile can be found at http://docs.docker.com/engine/reference/builder/ .

In this chapter, we shall install the Docker engine on Linux, download a Hello World Docker image, and run a Docker container for a Hello World application. We have used Linux because some of the other software we have used, such as Apache Hadoop, is supported (both in development and production) only on Linux. We have used two commonly used distributions of Linux, Red Hat 7 and Ubuntu 14, but any of the supported installations ( https://docs.docker.com/v1.8/installation/ ) could be used.

Setting the Environment

Installing Docker on Red Hat 7

Uninstalling Docker

Installing a Specific Docker Version

Installing Docker on Ubuntu

Starting the Docker Service

Finding the Docker Service Status

Running the Docker Hello World Application

Downloading a Docker Image

Running an Application in a Docker Container

Listing Running Docker Containers

Accessing the Application Output on Command Line

Accessing the Application Output in a Browser

Stopping a Docker Container

Removing a Docker Container

Removing a Docker Image

Stopping the Docker Service

Setting the Environment

We shall use Amazon EC2 instances based on Linux for deploying Docker and Docker images. Linux is required to support 64 bit software. We have made use of two different 64 bit (required) Amazon Machine Images (AMIs):

1.

Ubuntu Server 14.04 LTS (HVM), SSD Volume Type - ami-d05e75b8 64 bit

2.

Red Hat Enterprise Linux version 7.1 (HVM), EBS General Purpose (SSD) Volume Type (ami-12663b7a) 64 bit

An Amazon EC2 instance based on the Ubuntu AMI is shown in Figure 1-1.

Figure 1-1.

Amazon EC2 Instance Based on Ubuntu AMI

To connect to an Amazon EC2 instance, the public IP address is used. The public IP address may be obtained from the EC2 Console as shown in Figure 1-2.

Figure 1-2.

Obtaining the Public IP Address

Connect to an Amazon EC2 Ubuntu instance using SSH and the public IP address with the following command in which docker.pem is the private key format (.pem) generated by Amazon EC2.

ssh -i "docker.pem" ubuntu@54.86.12.113

The Ubuntu instance gets connected to as shown in Figure 1-3.

Figure 1-3.

Connecting to Ubuntu Instance on Amazon EC2 from Local Host

If a Red Hat AMI is used the command to connect to the Amazon EC2 instance is slightly different. Instead of the user “ubuntu” use the “ec2-user” user. For example, connect to the Linux instance using the following command in which docker.pem is the private key format (.pem) generated by Amazon EC2.

ssh -i "docker.pem" ec2-user@54.175.182.96

The RHEL 7.1 instance gets connected to as shown in Figure 1-4.

Figure 1-4.

Connecting to RHEL Instance

Run the following command to find if the Linux architecture supports 64 bit software.

uname -r

The x86_64 in the output as shown in Figure 1-5 indicates that 64 bit is supported.

Figure 1-5.

Finding Architecture Support

Installing Docker on Red Hat 7

Two different methods for installing Docker on Red Hat are available: install with yum or install with script. Installing with yum requires a user to add the yum repo, which could be more involved than the script option. We have used the Docker installation script to install Docker.

As a user with sudo or root privileges, update the local repository packages with the following command.

sudo yum update

Run the Docker installation script to install Docker Engine.

curl -sSL https://get.docker.com/   | sh

Docker Engine gets installed as shown in Figure 1-6.

Figure 1-6.

Installing Docker Engine

Before starting the Docker service, you should modify the docker.service file to disable the Docker start timeout. The docker.service file is in the /usr/lib/systemd/system directory, which has permissions set. Either run a sudo command or copy the file to a directory which does not have permissions set. For example, copy the docker.service to the root directory with the following command.

cp /usr/lib/systemd/system/docker.service .

Open the docker.service file in vi editor.

vi docker.service

Alternatively open the docker.service file as sudo.

sudo vi /usr/lib/systemd/system/docker.service

Add the following line to docker.service in the [Service] header.

TimeoutStartSec=0

The updated docker.service is shown in Figure 1-7.

Figure 1-7.

Updated docker.service

If the docker.service was copied to another directory copy the file back to the /usr/lib/systemd/system directory with the following command.

sudo cp docker.service  /usr/lib/systemd/system/docker.service

Flush changes to load the new configuration.

sudo systemctl daemon-reload

All the options for installing Docker on Red Hat are discussed at http://​docs.​docker.​com/​engine/​installation/​rhel/​.

Uninstalling Docker

This section may be skipped if Docker is to be made use of in this chapter and later chapters. To uninstall Docker, run the following command to list the Docker engines installed.

yum list installed | grep docker

Remove the Docker engine and Docker directory with the following commands.

sudo yum -y remove docker-engine.x86_64

rm -rf /var/lib/docker

Installing a Specific Docker Version

To install a specific version of Docker download and install the rpm for the version. For example, install Docker 1.7.0 as follows.

curl -O -sSL https://get.docker.com/rpm/1.7.0/centos-6/RPMS/x86_64/docker-engine-1.7.0-1.el6.x86_64.rpm

sudo yum localinstall --nogpgcheck docker-engine-1.7.0-1.el6.x86_64.rpm

Installing Docker on Ubuntu

Docker is supported on the following versions of Ubuntu: Ubuntu Wily 15.10, Ubuntu Vivid 15.04, Ubuntu Trusty 14.04 (LTS) and Ubuntu Precise 12.04 (LTS). Regardless of version, Docker requires a 64 bit OS with a minimum Linux kernel version of 3.10. To find the kernel version, run the following command in Ubuntu terminal.

uname –r

The kernel version output is 3.13, as shown in Figure 1-8, which is fine to install Docker.

Figure 1-8.

Outputting Kernel Version

Before installing the Docker engine on Ubuntu, update the apt sources starting with the following commands.

sudo apt-key adv --keyserver hkp://pgp.mit.edu:80 --recv-keys 58118E89F3A912897C070ADBF76221572C52609D

In the “Update your apt sources” ( http://docs.docker.com/engine/installation/ubuntulinux/ ) Section 6. requires you to update the /etc/apt/sources.list.d/docker.list based on the Ubuntu version. The Ubuntu distribution may be found with the following command.

lsb_release –a

For Ubuntu Trusty, the following line was added to the /etc/apt/sources.list.d/docker.list file.

deb https://apt.dockerproject.org/repo ubuntu-trusty main

Run the following commands after updating the /etc/apt/sources.list.d/docker.list file.

sudo apt-get update

sudo  apt-get purge lxc-docker*

sudo  apt-cache policy docker-engine

Install the pre-requisites for Ubuntu with the following commands.

sudo apt-get update

sudo apt-get install linux-image-generic-lts-trusty

Reboot the system.

sudo reboot

After the host system reboots, install Docker with the following commands.

sudo apt-get update

sudo apt-get install docker-engine

Starting the Docker Service

Regardless of the Linux distribution, start the Docker service with the following command.

sudo service docker start

Docker gets started via systemctl as indicated by the OK message in Figure 1-9.

Figure 1-9.

Starting Docker Service

Finding the Docker Service Status

To verify the status of the Docker service run the following command.

sudo service docker status

If the Docker service is running, the message Active: active (running) should be output as shown in Figure 1-10.

Figure 1-10.

Finding Docker Service Status

Running a Docker Hello World Application

To test Docker, run the Hello World application with the following docker run command.

sudo docker run hello-world

The docker run command is introduced in a later section. If the hello-world application runs fine, the output in Figure 1-11, which was generated on Red Hat 7, should be generated.

Figure 1-11.

Running hello-world Application

On Ubuntu, run the same command for hello-world.

sudo docker run hello-world

The “Hello from Docker” message gets output as shown in Figure 1-12.

Figure 1-12.

Running hello-world on Ubuntu

Downloading a Docker Image

When we ran the hello-world application using the docker run command, the Docker image hello-world got downloaded and a Docker container for the HelloWorld application started. A Docker image may be downloaded automatically when a Docker container for the Docker image is started, or the Docker image may be downloaded separately. The docker pull command is used to download a Docker image. For example, run the following command to download the Docker image tutum/hello-world, which is a different HelloWorld application packaged as a Docker image.

sudo docker pull tutum/hello-world

The Docker image is pre-built and is not required to be built. Docker image tutum/hello-world:latest gets downloaded as shown in Figure 1-13. The suffix :latest is a label for the Docker image specifying the image version, and by default the latest version gets downloaded.

Figure 1-13.

Downloading tutum:hello-world:latest

List the downloaded Docker images using the following command.

sudo docker images

The tutum/hello-world Docker image gets listed as shown in Figure 1-14 in addition to other images that might have been installed previously.

Figure 1-14.

Listing Docker Images

Running an Application in a Docker Container

The docker run command is used to run a process, which is another term for an application, in a separate container. The syntax for the docker run command is as follows.

docker run [OPTIONS] IMAGE[:TAG|@DIGEST] [COMMAND] [ARG...]

The only required command parameter is a Docker image. A Docker container may be started in a detached mode (or background) or foreground mode. In detached mode the process’s stdin, stdout and stderr streams are detached from the command line from which the docker run command is run. To start a container in detached mode, set –d=true or just –d. The default mode is the foreground mode in which the container starts in the foreground, and the stdin, stdout and stderr streams are attached to the host command line console. The –name option may be used to specify a name for the Docker container. The –p option is used to specify a port for the process running in the container. As an example, start a Docker container for the tutum/hello-world image in detached mode using the –d parameter, with container name as helloapp and port on which the application runs as 80 using the –p parameter.

sudo docker run -d -p 80 --name helloapp tutum/hello-world

The Docker container gets started as shown in Figure 1-15.

Figure 1-15.

Running an Application in a Docker Container

An interactive shell or terminal (tty) may be started to run commands applied to the process running in a container. An interactive terminal is started with the –i and –t command parameters used together or combined as –it. For a complete syntax of the docker run command, refer to http://docs.docker.com/engine/reference/run/ .

Listing Running Docker Containers

To list running Docker container run the following command.

sudo docker ps

The helloapp container gets listed as shown in Figure 1-16. A container id is also assigned to the container. In all docker commands such as docker stop, docker start either the container name or the container id may be used.

Figure 1-16.

Listing only the Docker Containers that are Running

In the PORTS column, the external port allocated to the process running on port 80 in the container is listed as 32768. When accessing the helloapp application from outside the container, the 32768 port has to be used (not port 80). The external port may also be listed using the docker port command.

sudo docker port 82171f7ade46

The port 32768 gets listed as shown in Figure 1-17. The 0.0.0.0 host IP Address implies all IP Addresses on the local machine.

Figure 1-17.

Listing Port

To list all Docker containers, running or exited, run the following command.

sudo docker ps –a

Accessing the Application Output on Command Line

The curl tool may be used to connect to the host and port on which the helloapp is running. Run the following command to access the application on external port 32768.

curl http://localhost:32768

The HTML generated by the helloapp gets output in the host as shown in Figure 1-18.

Figure 1-18.

Output from helloapp Application

Accessing the Application Output in a Browser

However, accessing an application that generates HTML output using a curl tool is not always the best method. In this section we shall access the helloapp in a browser. If the browser is on the same machine as the host running the Docker container, the url http://localhost:32768 may be used to display the application output. But if the browser is on a different host as in the example used in this chapter, the public DNS of the Amazon EC2 instance must be used to access the application. The public DNS may be obtained from the Amazon EC2 Console as shown in Figure 1-19.

Figure 1-19.

Finding Public DNS

Using the public DNS, access the helloapp in a remote browser, which could be running on Windows OS, with the URL http://ec2-54-86-12-113.compute-1.amazonaws.com:32768/ . The output generated by the application running in the Docker container helloapp gets displayed in the browser as shown in Figure 1-20.

Figure 1-20.

Displaying Output from helloapp in a Browser

Stopping a Docker Container

A Docker container may be stopped with the docker stop command. For example, stop the helloapp container with the following command.

sudo docker stop helloapp

The Docker container gets stopped. Subsequently run the docker ps command to list the running containers. The helloapp container does not get listed as shown in Figure 1-21.

Figure 1-21.

Stopping a Container

Removing a Docker Container

A Docker container may be removed with the docker rm command. For example, remove the helloapp container with the following command.

sudo docker rm helloapp

A Docker container must be stopped before removing the container.

Removing a Docker Image

To remove a Docker image, run the docker rmi command. For example, run the following command to remove the Docker image tutum/hello-world.

sudo docker rmi tutum/hello-world

All containers accessing a Docker image must be stopped and removed before a Docker image can be removed. Sometimes some incompletely downloaded Docker images could get listed with the docker images command. Such Docker images do not have a name assigned to them and instead are listed as <>. All such dangling images may be removed with the following command.

sudo docker rmi $(sudo docker images -f "dangling=true" -q)

As indicated in the output in Figure 1-22, multiple Docker images get removed.

Figure 1-22.

Removing Dangling Docker Images

Stopping the Docker Service

To stop a Docker service, run the following command.

sudo service docker stop

The Docker service may be started again with the following command.

sudo service docker start

Alternatively, a running Docker service may be restarted with the following command.

sudo service docker restart

Summary

In this chapter we introduced the Docker engine. We installed Docker on two Linux distributions: Red Hat 7 and Ubuntu, but Docker may also be installed on other Linux distributions. For supported Docker installation operating systems, refer to http://docs.docker.com/v1.8/installation/ . We discussed downloading a Docker image, running a Docker container using a Docker image, accessing the Docker container application from a remote browser, and stopping and removing a Docker container and a Docker image. In the next chapter, we shall run Linux in a Docker container.

© Deepak Vohra 2016

Deepak VohraPro Docker10.1007/978-1-4842-1830-3_2

2. Installing Linux

Deepak Vohra1 

(1)

BC, Canada

Installing Linux is a task most developers and all Linux administrators are familiar with. Several Linux distributions are available including Red Hat Linux, Ubuntu, openSuse and Oracle Linux. Some of the options for installing Linux include using the Amazon Linux AMIs, ISO images and virtual machine images. Linux could also be installed using a Docker image. Several Docker images for Linux distributions are available from the Docker public repository ( https://hub.docker.com/ ). In this chapter we will install Oracle Linux using a Docker image.

Setting the Environment

Downloading the Docker Image

Listing Docker Images

Running a Container in Detached Mode

Running a Container in Foreground

Listing Docker Containers

Finding Oracle Linux Container Information

Listing the Container Processes

Starting an Interactive Shell

Creating a Container

Stopping a Container

Removing a Container

Setting the Environment

The following software is required for this chapter:

-Docker (version 1.8.x used)

-Docker Image for Oracle Linux

-Host Linux OS (Amazon EC2 AMI used)

For Host OS we have used the Red Hat Enterprise Linux 7.1 (HVM), SSD Volume Type - ami-12663b7a on Amazon EC2. Login to the Amazon EC2 instance using the following command; the IP address (54.165.251.73) will be different for different users and may be obtained as explained in Appendix A.

ssh -i "docker.pem"  ec2-user@54.165.251.73

Install Docker as explained in Chapter 1. Start Docker with the following command.

sudo service docker start

An OK message indicates that Docker has started. To confirm that Docker has started run the following command.

sudo service docker status

If the Active: label has the active (running) value as shown in Figure 2-1, Docker has started and is ready to deploy applications in Docker containers.

Figure 2-1.

Finding Docker Status

Downloading the Docker Image

We have used the Docker image oraclelinux available from the Docker Hub Repository (https://​hub.​docker.​com/​_​/​oraclelinux/​). Download the latest version of the oraclelinux Docker image with the following command.

sudo docker pull oraclelinux

Docker images are tagged to the image name to differentiate the variants (or versions) of the image. For example, to download the oraclelinux 6.6 version, run the following command.

sudo docker pull oraclelinux:6.6

To download the oraclelinux 7 version run the following command.

sudo docker pull oraclelinux:7

The Docker images for oraclelinux 6.6 and 7 versions get downloaded as indicated by the output in Figure 2-2.

Figure 2-2.

Downloading Docker Images

Listing Docker Images

The Docker images downloaded and available to run applications may be listed with the following command.

sudo docker images

The two oraclelinux images; versions 6.6 and 7 are listed as shown in Figure 2-3. The TAG column lists the version (or variant) of the image.

Figure 2-3.

Listing Docker Images

Running a Container in Detached Mode

The docker run command is used to run a process in a container. The docker run command may be run in detached mode or attached mode. In detached mode the container is detached from the command line and the I/O is done through networking and shared volumes. The following command syntax would run a Docker container in a detached mode as indicated by the –d option. The –name option sets the name of the container.

sudo docker run –d  --name <container-name> <image-name>

The –i –t options if specified with the –d option do not start an interactive terminal or shell. For example run the following command to start a container in detached mode with name oraclelinux using the oraclelinux Docker image with tag 6.6.

sudo docker run –i –t  –d  --name oraclelinux6 oraclelinux:6.6

Even though the –i and –t options are specified, the container runs in detached mode as shown in Figure 2-4.

Figure 2-4.

Starting Docker Container in Detached Mode

In detached mode, the Docker container is detached from the STDIN, STDOUT and STDERR streams. The –rm option cannot be used in the detached mode. For docker run command syntax detail, refer to https://​docs.​docker.​com/​engine/​reference/​run/​.

Running a Container in Foreground

To run a Docker container in attached mode, omit the –d option.

sudo docker run  <image-name>

In attached mode, a container process is started and attached to all the standard streams (STDIN, STDOUT and STDERR). The –name option may also be used in attached mode to specify a container name. To start an interactive terminal, use the –i and –t options, which allocates a tty to the container process. The –rm option if specified cleans up the container resources including the filesystem allocated the container after the container has exited. Run the following command to run a container process using the oraclelinux:7.0 Docker image; the –name option specifies a name to the container, the –i –t options start an interactive terminal (tty) and the –rm option cleans up the container after the container has exited.

sudo docker run –i –t –rm –name oraclelinux7 oraclelinux:7.0

The Docker container process using the oracleinux image starts and attaches to an interactive shell or tty as shown in Figure 2-5.

Figure 2-5.

Starting Docker Container in Attached Mode

A container name must be unique. If a container with the same name as a running container is started, an error is generated as indicated in Figure 2-6.

Figure 2-6.

Container Name must be Unique

Listing Docker Containers

Docker containers can be running or not running. Run the following command to list Docker containers that are running.

sudo docker ps

The only running containers, oraclelinux:6.6 and oraclelinux:7.0, get listed as shown in Figure 2-7. The STATUS column indicates whether the container is “Up” and running or “Exited”. The CONTAINER ID column lists the container ID.

Figure 2-7.

Listing Running Docker Containers

To list all containers running or exited, run the following command.

sudo docker ps –a

The containers that have exited also get listed as shown in Figure 2-8.

Figure 2-8.

Listing All Docker Containers

Finding Oracle Linux Container Information

Information about a container can be listed with the docker inspect command. Run the following command to list information about container oraclelinux7.

sudo docker  inspect oraclelinux7

The container detail gets listed in JSON format as shown in Figure 2-9.

Figure 2-9.

Output from docker inspect

Listing the Container Processes

List the processes that a container is running with the docker top command. The following command lists the processes run by the oraclelinux6 container.

sudo docker top oraclelinux6

The UID and PID are among the columns listed for the processes as shown in Figure 2-10.

Figure 2-10.

Listing Container Processes

Starting an Interactive Shell

The interactive shell or tty may be started when the container process is started with the docker run command using the attached mode and the –i –t options to indicate an interactive terminal.

sudo docker run –i –t --rm <image-name>

Run the following command to run a container for the oraclelinux:7.0 image and start a tty terminal.

sudo docker run –i –t --rm –name oraclelinux7 oraclelinux:7.0

An interactive shell gets started and the container process gets attached to the terminal as shown in Figure 2-11.

Figure 2-11.

The interactive shell gets started when a Docker container is started in Attached Mode

If a container process has already been started in detached mode using the –d option, the interactive terminal may be started with the following command syntax.

docker exec -i -t <container> bash

The –i and –t options could be combined into –it. Run the following command to start a tty for the oraclelinux6 container.

sudo docker exec –it oraclelinux6 bash

An interactive tty gets started as shown in Figure 2-12.

Figure 2-12.

Starting an Interactive Terminal for a Docker Docker Container running in Detached Mode

Whether the tty is started when a container process is started using the –rm, -it options or subsequently using the preceding command, container commands may be run in the interactive shell. Commands run in an interactive shell are directed at the software or application that is running in the container. For example, if the Docker container is running Oracle Linux, the tty commands are for the Oracle Linux platform. For example, output the Oracle release using the following command.

cat /etc/oracle-release

The Oracle Linux Server release 7.0 gets listed as shown in Figure 2-13.

Figure 2-13.

Outputting Oracle Release

Run some other Linux commands to create a directory, set the permissions on the directory, and list the files and directories.

mkdir /orcl

chmod 777 /orcl

ls -l

The /orcl directory gets created and gets listed as shown in Figure 2-14.

Figure 2-14.

Listing Files and Directories

Run the exit command to exit the interactive shell as shown in Figure 2-15.

Figure 2-15.

Running the exit Command

Creating a Container

The docker create command is used to create a container. Run the following command to create a container called orcl6 for the oraclelinux:6.6 image. Even though the –i –t options are specified, an interactive shell does not get started.

docker create -i -t --name orcl6 oraclelinux:6.6 /bin/bash

To start the Docker container orcl6 and an interactive shell for the orcl6 container, run the docker start command. The -a and -i options attach the current shell’s standard input, standard output and standard error streams to those of the container. All signals are forwarded to the container.

sudo docker start –a –i orcl6

The Docker container orcl6 and an interactive shell get started as shown in Figure 2-16.

Figure 2-16.

Starting an Interactive Shell with docker start

Stopping a Container

To stop a running container, run the docker stop command. Run the following command to stop the orcl6 container.

sudo docker stop orcl6

The orcl6 container gets stopped as shown in Figure 2-17.

Figure 2-17.

Stopping a Docker Container

Subsequently, the docker ps –a command should list the orcl6 container as “Exited” as shown in Figure 2-18.

Figure 2-18.

Listing an Exited Container

Removing a Container

To remove a container, run the docker rm command. The container first must be stopped before removing, or the docker rm command will not remove the container. Run the following command to remove the orcl6 container.

sudo docker rm orcl6

The orcl6 container gets removed as shown in Figure 2-19.

Figure 2-19.

Removing A Docker Container

Summary

In this chapter we installed Oracle Linux in a Docker container. We discussed how to download the Docker image and run a container process. We also discussed using the different image tags, starting an interactive shell, the different modes of running a container, and starting, stopping and removing a container. In the next chapter we shall discuss running Oracle database in a Docker container.

© Deepak Vohra 2016

Deepak VohraPro Docker10.1007/978-1-4842-1830-3_3

3. Using Oracle Database

Deepak Vohra1 

(1)

BC, Canada

Oracle Database is the most commonly used relational database. Relational databases are based on a fixed schema with the basic unit of storage being a table. Docker Hub has several Docker images for Oracle Database in the Public repository. In this chapter we shall use a Docker image for Oracle Database to install and use the database on Linux. This chapter has the following sections.

Setting the Environment

Starting Oracle Database

Listing Container Logs

Starting SQL* Plus

Creating a User

Creating a Database Table

Removing Oracle Database

Setting the Environment

The following software is required for this chapter.

-Docker Engine (version 1.8 used)

-Docker Image for Oracle Database

We have used an Amazon EC2 instance with Red Hat Linux 7 as the OS. First, SSH login to the Amazon EC2 instance. The IP Address would be different for different users.

ssh -i "docker.pem" ec2-user@54.175.172.33

Find the status of the Docker engine.

sudo service docker status

If the Docker engine is not running, start the Docker service.

sudo service docker start

Download the sath89/oracle-xe-11g Docker image.

sudo docker pull sath89/oracle-xe-11g

The latest image of sath89/oracle-xe-11g gets downloaded as shown in Figure 3-1.

Figure 3-1.

Downloading Docker Image for Oracle Database

List the Docker images.

sudo docker images

The sath89/oracle-xe-11g image gets listed as shown in Figure 3-2.

Figure 3-2.

Listing Docker Images

Starting Oracle Database

Next, start an Oracle Database instance in a Docker container with the docker run command. Specify the 8080 port for the Oracle Application Express admin console and the 1521 port for the Oracle Database listener. Specify the container name with the –name option.

docker run --name orcldb -d -p 8080:8080 -p 1521:1521 sath89/oracle-xe-11g

Oracle Database gets started in a Docker container as shown in Figure 3-3.

Figure 3-3.

Starting Oracle Database in a Docker Container

List the Docker containers with the following command.

sudo docker ps

The orcldb container gets listed as shown in Figure 3-4.

Figure 3-4.

Listing Docker Containers that are Running

The Oracle Database hostname, port, SID, user name and password are as follows.

hostname: localhost

port: 1521

sid: xe

username: system

password: oracle

Listing Container Logs

To list the container logs, run the docker logs command.

sudo docker logs -f c0fa107a43d2

The container logs get listed as shown in Figure 3-5. The Oracle Database logs include the database initialization and configuration.

Figure 3-5.

Listing Docker Container Log

A more detailed Docker container log is as follows.

[ec2-user@ip-172-30-1-192 ∼]$ sudo docker logs -f c0fa107a43d2

Database not initialized. Initializing database.

Setting up:

processes=500

sessions=555

transactions=610

If you want to use different parameters set processes, sessions, transactions env variables and consider this formula:

processes=x

sessions=x*1.1+5

transactions=sessions*1.1

Oracle Database 11g Express Edition Configuration

-------------------------------------------------

This will configure on-boot properties of Oracle Database 11g Express

Edition.  The following questions will determine whether the database should

be starting upon system boot, the ports it will use, and the passwords that

will be used for database accounts.  Press <Enter> to accept the defaults.

Ctrl-C will abort.

Specify the HTTP port that will be used for Oracle Application Express [8080]:

Specify a port that will be used for the database listener [1521]:

Specify a password to be used for database accounts.  Note that the same

password will be used for SYS and SYSTEM.  Oracle recommends the use of

different passwords for each database account.  This can be done after

initial configuration:

Confirm the password:

Do you want Oracle Database 11g Express Edition to be started on boot (y/n) [y]:

Starting Oracle Net Listener...Done

Configuring database...Done

Starting Oracle Database 11g Express Edition instance...Done

Installation completed successfully.

Database initialized. Please visit http://#containeer:8080/apex to proceed with configuration

Oracle Database 11g Express Edition instance is already started

Database ready to use. Enjoy! ;)

[ec2-user@ip-172-30-1-192 ∼]$

Starting SQL* Plus

Start an interactive shell using the following command. The container ID would most likely be different.

sudo docker exec -it c0fa107a43d2 bash

For more detail on bash refer to http://www.gnu.org/software/bash/manual/bash.html#Bash-Startup-Files . Run the following command in the tty. The terms “tty”, “interactive shell” and “interactive terminal” have been used interchangeably.

sqlplus

When prompted for a user-name as shown in Figure 3-6, specify “system”.

Figure 3-6.

Starting SQL*Plus

When prompted for a password, specify “oracle”. A connection gets established with Oracle Database 11g Express. SQL*Plus gets started and the SQL> prompt gets displayed as shown in Figure 3-7.

Figure 3-7.

SQL*Plus Shell Prompt

We used the container id to start the interactive tty terminal. Alternatively, the container name may be used as follows.

sudo docker exec -it orcldb bash

Creating a User

To create a user called OE with unlimited quota on SYSTEM tablespace and password as “OE”, run the following command.

SQL> CREATE USER OE QUOTA UNLIMITED ON SYSTEM IDENTIFIED BY OE;

Grant the CONNECT and RESOURCE roles to the OE user.

GRANT CONNECT, RESOURCE TO OE;

User “OE” gets created and the roles get granted as shown in Figure 3-8.

Figure 3-8.

Creating User OE

Creating a Database Table

Create a database called called “Catalog” in the “OE” schema with the following SQL statement.

SQL> CREATE TABLE OE.Catalog(CatalogId INTEGER PRIMARY KEY,Journal VARCHAR2(25),Publisher VARCHAR2(25),Edition VARCHAR2(25),Title VARCHAR2(45),Author VARCHAR2(25));

Table “Catalog” gets created as shown in Figure 3-9.

Figure 3-9.

Creating Oracle Database Table OE.Catalog

Add data to the Catalog table with the following INSERT SQL statement.

SQL> INSERT INTO OE.Catalog VALUES('1','Oracle Magazine','Oracle Publishing','November December 2013','Engineering as a Service','David A. Kelly');

One row of data gets added as shown in Figure 3-10.

Figure 3-10.

Adding Data to OE.Catalog Table

Run a SQL query with the following SELECT statement.

SQL> SELECT * FROM OE.CATALOG;

The one row of data added gets listed as shown in Figure 3-11.

Figure 3-11.

Running a SQL Query

To exit from SQL*Plus, specify the exit command as shown in Figure 3-12.

Figure 3-12.

Exiting SQL*Plus

Removing Oracle Database

To remove the container running the Oracle Database instance, run the following docker rm command.

sudo docker rm c0fa107a43d2

To remove the Docker image sath89/oracle-xe-11g, run the following command.

sudo docker rmi sath89/oracle-xe-11g

The Docker container and image get removed as shown in Figure 3-13.

Figure 3-13.

Removing Docker Image

Summary

In this chapter we used a Docker image to install Oracle Database 11g XE on an Amazon EC2 instance. We logged into SQL*Plus and created a database table to demonstrate the use of Oracle Database running in a Docker container. In the next chapter, we shall run the MySQL Database in a Docker container.

© Deepak Vohra 2016

Deepak VohraPro Docker10.1007/978-1-4842-1830-3_4

4. Using MySQL Database

Deepak Vohra1 

(1)

BC, Canada

MySQL is the most commonly used open source relational database. MySQL is similar to Oracle Database in some regards such as users are kept in grant tables by the database. But MySQL is different from Oracle Database in some regards too:

1.

MySQL does not have roles and privileges have to be granted individually to users.

2.

Database and table names are case-insensitive in Oracle but are case sensitive if the underlying OS is case-sensitive.

3.

MySQL provides a default value for columns that do not allow a NULL value and a value is not provided explicitly in the INSERT statement, if the strict mode is not enabled. Oracle database does not generate a default value for columns with the NOT NULL constraint.

4.

MySQL database supports AUTO_INCREMENT for a column while a Sequence is used in Oracle Database.

5.

Some of the data types in MySQL are different. For example, MySQL does not support the VARCHAR2 data type.

In this chapter we shall run MySQL database in a Docker container. This chapter has the following sections.

Setting the Environment

Starting MySQL CLI Shell

Setting the Database to Use

Creating a Database Table

Adding Table Data

Querying a Table

Listing Databases and Tables

Exiting TTY Terminal

Starting Another MySQL Server Instance

Listing Docker Container Log

Setting the Environment

The following software is required for this chapter.

-Docker Engine (version 1.8 used)

-Docker image for MySQL Database

Login to an Amazon EC2 instance using the public IP address of the instance.

ssh -i "docker.pem" ec2-user@52.91.169.69

Start the Docker service.

sudo service docker start

Verify that the Docker service is running.

sudo service docker status

The output from the docker start command should be OK and the output from the docker status command should be active (running) for the Active field as shown in Figure 4-1.

Figure 4-1.

Starting Docker Service and verifying Status

Docker Hub provides an official Docker image. Download the Docker image with the following command.

sudo docker pull mysql

The latest Docker image mysql:latest gets downloaded as shown in Figure 4-2.

Figure 4-2.

Downloading Docker Image for MySQL Database

List the Docker images with the following command.

sudo docker images

The mysql image gets listed as shown in Figure 4-3.

Figure 4-3.

Listing Docker Image for MySQL Database

Starting MySQL Server

In this section we shall run MySQL database in a Docker container. MySQL database uses the /var/lib/mysql directory by default for storing data, but another directory may also be used. We shall use the /mysql/data directory for storing MySQL data. Create the /mysql/data directory and set its permissions to global (777).

sudo mkdir -p /mysql/data

sudo chmod -R 777 /mysql/data

The /mysql/data directory gets created as shown in Figure 4-4.

Figure 4-4.

Creating the Data Directory

When the docker run command is run to start MySQL in a Docker container, certain environment variables may be specified as discussed in the following table.

Env Variable

Description

Required

MYSQL_ROOT_PASSWORD

Password for the “root” user.

Yes

MYSQL_DATABASE

Creates a database

No

MYSQL_USER, MYSQL_PASSWORD

Specify the username and password to create a new user. The user is granted superuser privileges on the database specified in the MYSQL_DATABASE variable. Both the user name and password must be set if either is set.

No

MYSQL_ALLOW_EMPTY_PASSWORD

Specifies whether the “root” user is permitted to have an empty password.

No

Other than the MYSQL_ROOT_PASSWORD environment variable, all the other variables are optional, but we shall run a MySQL instance container using all the environment variables. We shall run the docker run command using the following command parameters.

Command Parameter

Value

MYSQL_ROOT_PASSWORD

‘’

MYSQL_DATABASE

mysqldb

MYSQL_USER, MYSQL_PASSWORD

mysql, mysql

MYSQL_ALLOW_EMPTY_PASSWORD

yes

-v

/mysql/data:/var/lib/mysql

--name

mysqldb

-d

The environment variables are specified with –e. Run the following docker run command to start a MySQL instance in a Docker container.

sudo docker run -v /mysql/data:/var/lib/mysql --name mysqldb -e MYSQL_DATABASE='mysqldb' -e MYSQL_USER='mysql' -e MYSQL_PASSWORD='mysql' -e MYSQL_ALLOW_EMPTY_PASSWORD='yes' -e MYSQL_ROOT_PASSWORD='' -d mysql

The output from the docker run command is shown in Figure 4-5.

Figure 4-5.

Running MySQL Database in a Docker Container

Run the following command to list the Docker containers that are running.

sudo docker ps

The Docker container mysqldb that is running the MySQL database instance gets listed as shown in Figure 4-6.

Figure 4-6.

Listing Docker Containers

Starting MySQL CLI Shell

Next, we shall log into the MySQL CLI shell. But first we need to start an interactive terminal to run the mysql command to start the MySQL CLI. Start the interactive terminal or shell with the following command.

sudo docker exec -it mysqldb bash

In the interactive terminal run the following command.

mysql

The MySQL CLI gets started as shown in Figure 4-7.

Figure 4-7.

Starting MySQL CLI

The interactive terminal may also be started using the container id instead of the container name.

sudo docker exec -it 969088c84a4f bash

Setting the Database to Use

Set the database with the “use” command. The “test” database is not provided by the MySQL database started in a Docker container by default. If the “use test” command is run, the following error message is output.

mysql> use test

ERROR 1049 (42000): Unknown database 'test'

We created a database called “mysqldb” when we started the Docker container for MySQL database with the docker run command. Set the database to “mysqldb” with the following command.

mysql> use mysqldb

The output from the preceding commands is as follows. The database gets set to “mysqldb” as shown in Figure 4-8.

Figure 4-8.

Setting Database to mysqldb

Creating a Database Table

Next, create a database table called “Catalog” with columns CatalogId, Journal, Publisher, Edition, Title and Author. Run the following SQL statement.

mysql> CREATE TABLE Catalog(CatalogId INTEGER PRIMARY KEY,Journal VARCHAR(25),Publisher VARCHAR(25),Edition VARCHAR(25),Title VARCHAR(45),Author VARCHAR(25));

The Catalog table gets created as shown in Figure 4-9.

Figure 4-9.

Creating a MySQL Database Table

Adding Table Data

Add data to the Catalog table with the following INSERT statement.

mysql> INSERT INTO Catalog VALUES('1','Oracle Magazine','Oracle Publishing','November December 2013','Engineering as a Service','David A. Kelly');

A row of data gets added to the Catalog table as shown in Figure 4-10.

Figure 4-10.

Adding a Row of Data to MySQL Table

Querying a Table

Next, query the Catalog table with a SQL query. The following SELECT statement selects all the data in the Catalog table.

mysql> SELECT * FROM Catalog;

The one row of data added gets listed as shown in Figure 4-11.

Figure 4-11.

Running a SQL Query

MySQL table name is case sensitive on the OS (RHEL 7.1 OS) used in this chapter. If a variation of the table name Catalog is used, an error is generated. For example, use table name CATALOG in the SQL query and the following error gets generated as shown in Figure 4-12.

Figure 4-12.

The table name is Case-sensitive in MySQL

Listing Databases and Tables

The databases in a MySQL server instance may be listed with the following command in MySQL CLI.

mysql> show databases;

The databases get listed, including the newly created database “mysqldb” as shown in Figure 4-13.

Figure 4-13.

Listing MySQL Databases

Exiting TTY Terminal

Exit the MySQL CLI with the “exit” command.

mysql> exit

Bye

Exit the interactive shell or tty with the “exit” command.

root@969088c84a4f:/# exit

exit

The output from the preceding commands is shown in Figure 4-14.

Figure 4-14.

Exiting MySQL CLI

Stopping a Docker Container

Stop the Docker container with the docker stop command.

[ec2-user@ip-172-30-1-192 ∼]$ sudo docker stop 969088c84a4f

969088c84a4f

Subsequently, list the running Docker containers with the docker ps command. The mysqldb container does not get listed.

sudo docker ps

[ec2-user@ip-172-30-1-192 ∼]$ sudo docker ps

CONTAINER ID      IMAGE      COMMAND      CREATED      STATUS      PORTS      NAMES

In the next section we shall create another MySQL Server instance just as we created the MySQL server instance earlier in this chapter. But we cannot use the same container name as an existing container. Another Docker container running a MySQL database, or any other software, may be started if the Docker container name is different. If we created a Docker container to run another MySQL server with the same name “mysqldb”, an error gets generated. For example, run the following docker run command to create another container called “mysqldb”.

sudo docker run --name mysqldb -e MYSQL_ROOT_PASSWORD=mysql -d mysql

The following error gets output.

Error response from daemon: Conflict. The name "mysqldb" is already in use by container 969088c84a4f. You have to delete (or rename) that container to be able to reuse that name.

To create a new Docker container called “mysqldb” first remove the “mysqldb” container already created with the docker rm command. Either the container id or the container name may be used in docker commands for a container such as stop, start, and rm.

sudo docker rm 969088c84a4f

Starting Another MySQL Server Instance

Having removed the “mysqldb” container, create the container again with the docker run command. We shall create the new “mysqldb” container differently. Specify different environment variables for the second run of the docker run command. Specify only the required environment variable MYSQL_ROOT_PASSWORD and set its value to “mysql”.

sudo docker run --name mysqldb -e MYSQL_ROOT_PASSWORD=mysql -d mysql

Subsequently, start the interactive shell with the following command.

sudo docker exec -it 113458c31ce5 bash

Login to the MySQL CLI with the following command in the interactive shell.

mysql –u root –p mysql

Specify the password for the “root” user, which is mysql. MySQL CLI gets started as shown in Figure 4-15.

Figure 4-15.

Using a Password to Start MySQL CLI

The mysql command may also be issued as follows.

mysql –u root –p

Specify the password for the “mysql” user. MySQL CLI gets started as shown in Figure 4-16.

Figure 4-16.

Alternative mysql Login command

The following mysql command does not start a MySQL CLI.

root@113458c31ce5:/# mysql -u root

The following error is generated.

ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: NO)

List the databases with the show databases command. The default databases include the “mysql” database as shown in Figure 4-17. Previously, the “mysqldb” database also got listed with the show databases command because the “mysqldb” database was created when the docker run command was run.

Figure 4-17.

Listing the Default Databases

Set the database as the “mysql” database with the “use mysql” command as shown in Figure 4-18.

Figure 4-18.

Using the mysql Database

List the database tables in the mysql database with the show tables command as shown in Figure 4-19.

Figure 4-19.

Listing Tables

Listing Docker Container Logs

Next, list the logs for the mysqldb container with the docker logs command.

sudo docker logs -f mysqldb

The logs for the mysqldb container get listed as shown in Figure 4-20.

Figure 4-20.

Listing Docker Container Log

Summary

In this chapter we used a Docker image to run MySQL Server in a Docker container. We ran two different variations of the docker run command; one included all the environment variables that may be set for the “mysql” image and the other included only the required environment variable/s. In the next chapter we shall discuss running MongoDB on Docker.

© Deepak Vohra 2016

Deepak VohraPro Docker10.1007/978-1-4842-1830-3_5

5. Using MongoDB

Deepak Vohra1 

(1)

BC, Canada

MongoDB is the most commonly used NoSQL database. MongoDB is based on the Document store data model and stores data as BSON (Binary JSON) documents. MongoDB provides a flexible schema-less storage format in which different records could have different fields, implying that no fixed data structure is applied. Field values have no data types associated with them and different fields could be of different data types. With the JSON format, hierarchies of data structures become feasible, and a field could store multiple values using an array. In this chapter we shall use a Docker image to run MongoDB in a Docker container. This chapter has the following sections.

Setting the Environment

Starting MongoDB

Starting an Interactive Terminal

Starting a Mongo Shell

Creating a Database

Creating a Collection

Creating a Document

Finding Documents

Adding Another Document

Dropping a Collection

Adding a Batch of Documents

Updating a Document

Querying a Single Document

Querying All the Documents

Making a Backup of the Data

Stopping and Restarting the MongoDB Database

Removing Documents

Exiting Mongo Shell

Setting the Environment

The following software is required for this chapter:

-Docker Engine (version 1.8)

-Docker image for MongoDB

We have used an Amazon EC2 instance (Amazon Machine Image Red Hat Enterprise Linux 7.1 (HVM), SSD Volume Type - ami-12663b7a) to install the Docker image and run MongoDB in a Docker container. SSH login to the Amazon EC2 instance.

ssh -i "docker.pem" ec2-user@54.174.254.96

Start the Docker service.

sudo service docker start

Verify the Docker service status.

sudo service docker status

Docker service should be active (running) as shown in Figure 5-1.

Figure 5-1.

Starting Docker Service and verifying Status

Download the official Docker image for MongoDB database.

sudo docker pull mongo:latest

List the Docker images.

sudo docker images

The Docker image called “mongo” gets listed as shown in Figure 5-2.

Figure 5-2.

Downloading Docker Image mongo

Starting MongoDB

Next, start MongoDB in a Docker container. MongoDB stores data in the /data/db directory in the Docker container by default. A directory could be mounted from the underlying host system to the container running the MongoDB database. For example, create a directory /data on the host.

sudo mkdir -p /data

Start the Docker container using the docker run command on the mongo image with the /data directory in the container mounted as /data directory on the host. Specify container name as “mongodb”.

sudo docker run -t -i -v /data:/data --name mongodb -d mongo

The Docker container, and the MongoDB server in the container, gets started as shown in Figure 5-3.

Figure 5-3.

Starting Docker Container for MongoDB

List the running Docker containers.

sudo docker ps

The mongodb container gets listed as running on port 27017 as shown in Figure 5-4.

Figure 5-4.

Listing Docker Container for MongoDB

The MongoDB port could also be specified explicitly using the –p option.

docker run -t -i -v /data:/data -p 27017:27017 --name mongodb -d mongo

The container logs may be listed using the docker logs command.

sudo docker logs mongodb

Starting an Interactive Terminal

Start an interactive terminal (tty) using the following command.

sudo docker exec -it mongodb bash

Starting a Mongo Shell

To start the MongoDB shell, run the following command.

mongo

The MongoDB shell gets started and the > prompt gets displayed as shown in Figure 5-5.

Figure 5-5.

Starting MongoDB Shell from TTY

The MongoDB shell may also be started on a specific host and port as follows.

mongo –host localhost –port 27017

MongoDB shell gets started on host localhost, port 27017 as shown in Figure 5-6. The “test” database instance gets connected to.

Figure 5-6.

Starting MongoDB Shell using Host and Port

Alternatively, only one of the host or the port may be specified to start the MongoDB shell.

mongo –port 27017

MongoDB shell gets started and gets connected to MongoDB server on 127.0.0.1:27071/test as shown in Figure 5-7.

Figure 5-7.

Starting MongoDB Shell using only the Port

Another form of specifying the host and port is host:port. For example, start the MongoDB shell and connect to localhost:27017 with the following command.

mongo localhost:27017

MongoDB Shell gets connected to localhost:27017/test database as shown in Figure 5-8.

Figure 5-8.

Starting MongoDB Shell using host:port Format

Creating a Database

List the databases from the MongoDB shell with the following command help method (also called command helper).

show dbs

A new database is created implicitly when the database name is set to the database to be created. For example, set the database to “mongodb” with the following command.

use mongodb

The show dbs command help method does not list the mongodb database till the database is used. Use the db.createCollection() method to create a collection called “catalog”. Subsequently, run the show dbs command again.

show dbs

db.createCollection("catalog")

show dbs

The show dbs command does not list the “mongodb” database before the “catalog” collection is created, but lists the “mongodb” database after the collection has been created as shown in Figure 5-9.

Figure 5-9.

Creating a Database

List the collections in the mongodb database with the following command.

show collections

The “catalog” collection gets listed in addition to the system collection system.indexes as shown in Figure 5-10.

Figure 5-10.

Listing Collections

Creating a Collection

In the previous section we created a collection called “catalog” using the db.createCollection command. Next, create a capped collection “catalog_capped” by setting the capped option field to true. A capped collection is a fixed size collection that keeps track of the insertion order while adding and getting a document, and as a result provides high throughput.

db.createCollection("catalog_capped", {capped: true, autoIndexId: true, size: 64 * 1024, max: 1000} )

A capped collection called “catalog_capped” gets created as shown in Figure 5-11.

Figure 5-11.

Creating a Capped Collection

A collection may also be created using the db.runCommand command. Create another capped collection called “catalog_capped_2” using the db.runCommand command.

db.runCommand( { create: "catalog_capped_2", capped: true, size: 64 * 1024, max: 1000 } )

Capped collection catalog_capped_2 gets created as shown in Figure 5-12.

Figure 5-12.

Creating a Capped Collection using db.runCommand()

Creating a Document

Next, we shall add documents to a MongoDB collection. Initially the catalog collection is empty. Run the mongo shell method db.<collection>.count() to count the documents in the catalog collection. Substitute <collection> with the collection name “catalog”.

db.catalog.count()

The number of documents in the catalog collection gets listed as 0 as shown in Figure 5-13.

Figure 5-13.

Finding Document Count

Next, we shall add a document to the catalog collection. Create a JSON document structure with fields catalogId, journal, publisher, edition, title and author.

doc1 = {"catalogId" : "catalog1", "journal" : 'Oracle Magazine', "publisher" : 'Oracle Publishing', "edition" : 'November December 2013',"title" : 'Engineering as a Service',"author" : 'David A. Kelly'}

Add the document to the catalog collection using the db.<collection>.insert() method.

db.catalog.insert(doc1)

Subsequently output the document count again.

db.catalog.count()

The output from the db.catalog.insert() method, shown in Figure 5-14, is an object of type WriteResult with nInserted as 1, which implies that one document got added. The document count is listed as 1.

Figure 5-14.

Adding a Document

Finding Documents

The db.collection.find(query, projection) method is used to find document/s. The query parameter of type document specifies selection criteria using query operators. The projection parameter also of type document specifies the fields to return. Both the parameters are optional. To select all documents do not specify any args or specify an empty document {}. For example, find all documents in the catalog collection.

db.catalog.find()

The one document added previously gets listed as a JSON document as shown in Figure 5-15. The _id field is added to the documented automatically if not specified explicitly.

Figure 5-15.

Running a Query using find() Method

Adding Another Document

Similarly, create the JSON structure for another document. The same document may be added again if the _id is unique. In the JSON include the _id field as an explicit field/attribute. The _id field value must be an object of type ObjectId and not a string literal.

doc2 = {"_id": ObjectId("507f191e810c19729de860ea"), "catalogId" : "catalog1", "journal" : 'Oracle Magazine', "publisher" : 'Oracle Publishing', "edition" : 'November December 2013',"title" : 'Engineering as a Service',"author" : 'David A. Kelly'};

Add the document using the db.<collection>.insert() method.

db.catalog.insert(doc2)

Another document gets added to the catalog collection as indicated by the nInserted value of 1 shown in Figure 5-16.

Figure 5-16.

Adding Another Document

Subsequently query the catalog collection using db.<collection>.find() method.

db.catalog.find()

The two documents added to the catalog collection get listed as shown in Figure 5-17. The two documents have all the same name/value pairs in the JSON except the _id field, which has a unique value.

Figure 5-17.

Running the find() Method

Querying a Single Document

The db.<collection>.findOne() method is used to find a single document. Find a single document from the catalog collection.

db.catalog.findOne()

One of the documents gets output by the query as shown in Figure 5-18.

Figure 5-18.

Using the findOne() Method

The db.collection.findOne(query, projection) method also takes two args both of type document and both optional. The query parameter specifies the query selection criteria and the projection parameter specifies the fields to select. For example, select the edition, title and author fields and specify the query document as {}.

db.catalog.findOne(

    {  },

{ edition: 1, title: 1, author: 1 }

)

The edition, title and author fields get listed. The _id field is always output by a query as shown in Figure 5-19.

Figure 5-19.

Using a Query Projection

Dropping a Collection

The db.collection.drop() method drops or removes a collection. For example, remove the catalog collection.

db.catalog.drop()

Subsequently, the show collections method does not list the catalog collection as shown in Figure 5-20.

Figure 5-20.

Dropping a Collection

Adding a Batch of Documents

Previously, we added a single document at a time. Next, we shall add a batch of documents. Drop the catalog collection if not already dropped in the previous section.

db.catalog.drop()

Add an array of documents using the db.catalog.insert() method invocation with the doc1 and doc2 being the same as earlier. The writeConcern option specifies the guarantee MongoDB provides and a value of “majority” implies that the insert() method does not return till the write has been propagated to the majority of the nodes. Setting the ordered option to true adds the documents in the order specified.

db.catalog.insert([doc1, doc2],  { writeConcern: { w: "majority", wtimeout: 5000 }, ordered:true })

The full syntax of the insert method is made use of in the preceding method invocation and is as follows.

db.collection.insert(

   <document or array of documents>,

   {

     writeConcern: <document>,

     ordered: <boolean>

   }

)

The first parameter is a single document or an array of documents. The second parameter is a document with fields writeConcern and ordered. The writeConcern specifies the write concern or the guarantee that MongoDB provides on the success of an insert. The ordered parameter is set to true, which implies that the documents are added in the order specified and if an error occurs with one of the documents none of the documents are added. The nInserted in the output is 2 for the two documents added as shown in Figure 5-21.

Figure 5-21.

Adding a Batch of Documents

Run the db.catalog.find() method to query the documents in the catalog collection as shown in Figure 5-22.

Figure 5-22.

Running the find() Method to list Documents added in a Batch

Updating a Document

The db.collection.save() method has the following syntax and updates a document if the document already exists, and ads a new document if the document does not exist.

db.collection.save(

   <document>,

   {

     writeConcern: <document>

   }

)

A document is identified by the unique _id of type ObjectId. Next, we shall update document with _id as ObjectId("507f191e810c19729de860ea"). Create an updated JSON document with some of the field values modified.

doc1 = {"_id": ObjectId("507f191e810c19729de860ea"), "catalogId" : 'catalog1', "journal" : 'Oracle Magazine', "publisher" : 'Oracle Publishing', "edition" : '11-12-2013',"title" : 'Engineering as a Service',"author" : 'Kelly, David A.'}

Save the document using the db.collection.save() method in the catalog collection.

db.catalog.save(doc1,{ writeConcern: { w: "majority", wtimeout: 5000 } })

The document gets saved by updating an existing document. The nMatched is 1 and nUpserted is 0, and nModified is 1 in the WriteResult object returned as shown in Figure 5-23. The nUpserted field refers to the number of new documents added in contrast to modifying an existing document.

Figure 5-23.

Using the save() Method to Update a Document

Query the catalog collection using the find() method.

db.catalog.find()

The updated document gets listed as one of the documents as shown in Figure 5-24.

Figure 5-24.

Querying Updated Document

Outputting Documents as JSON

The db.collection.find(query, projection) method returns a cursor over the documents that are selected by the query. Invoke the forEach(printjson) method on the cursor to output the documents as formatted JSON.

db.catalog.find().forEach(printjson)

The documents get output as JSON as shown in Figure 5-25.

Figure 5-25.

Outputting JSON

Making a Backup of the Data

The mongodump utility is used for creating a binary export of the data in a database. The mongorestore utility is used in conjunction with mongodump to restore a database from backup. The mongorestore utility either creates a new database instance or adds to an existing database.

Run the following mongodump command to export the test database to the /data/backup directory.

mongodump --db test --out /data/backup

The test database gets exported to the /data/backup directory as shown in Figure 5-26.

Figure 5-26.

Exporting the test Database

List the directories in the /data/backup directory. The test database directory gets listed as shown in Figure 5-27.

Figure 5-27.

Listing the test Database

Run the following mongorestore command to restore the exported data from /data/backup/test to the testrestore database.

mongorestore --db testrestore /data/backup/test

The /data/backup/test directory data gets restored in the testrestore database as shown in Figure 5-28.

Figure 5-28.

Restoring a Database

Connect to the MongoDB shell with the following command.

mongo localhost:27017/testrestore

The MongoDB shell gets started as shown in Figure 5-29.

Figure 5-29.

Connecting to the Restored Database

List the databases with the following command.

show dbs

As we restored the backup to the testrestore database the mongodb database, which was previously exported, gets listed as shown in Figure 5-30.

Figure 5-30.

Listing the Restored Database

Set the database name as mongodb.

use mongodb

List the collections.

show collections

Query the documents in the catalog collection.

db.catalog.find()

Output from the preceding commands is shown in Figure 5-31.

Figure 5-31.

Listing and Querying the Restored Collection

Removing Documents

The db.collection.remove method is used to remove document/s and has the following syntax.

db.collection.remove(

   <query>,

   <justOne>

)

For example, remove the document with ObjectId("561ff033380a18f6587b0aa5").

db.catalog.remove({ _id: ObjectId("561ff033380a18f6587b0aa5") })

The nRemoved in the WriteResult is 1 indicating that one document got removed. Run the db.catalog.find() method before and after the db.catalog.remove() method invocation. Before the db.catalog.remove() method is invoked, two documents get listed, and afterward only one document gets listed as shown in Figure 5-32.

Figure 5-32.

Removing a Single Document

To remove all documents, provide an empty document {} to the db.catalog.remove() method invocation.

db.catalog.remove({})

Multiple documents get removed as indicated by nRemoved value of 2 as shown in Figure 5-33.

Figure 5-33.

Removing All Documents

An empty query document must be supplied to the db.catalog.remove() method invocation. If an empty document {} is not supplied, an error is generated indicating that a query is needed as shown in Figure 5-34.

Figure 5-34.

An empty document must be provided to the remove() method to remove all documents

Stopping and Restarting the MongoDB Database

The Docker container running the MongoDB instance may be stopped with the docker stop command.

sudo docker stop mongo

List the running Docker containers with the following command.

sudo docker ps

Start the Docker container again with the docker start command.

sudo docker start mongo

Run the following command again to list the running containers.

sudo docker ps

The output from the preceding commands is shown in Figure 5-35. The Docker container mongodb is again listed as running.

Figure 5-35.

Listing a Docker Container after Restarting the Container

Start the interactive terminal with the following command in which the container ID is used instead of the container name.

sudo docker exec -it 68fe88ca79fe bash

Start the MongoDB shell with the mongo command in the interactive shell as shown in Figure 5-36.

Figure 5-36.

Starting the MongoDB Shell

Set the database to local and list the collections with the show collections command. Subsequently set the database to mongodb and list the collections. The db.catalog.find() method does not list any documents as shown in Figure 5-37.

Figure 5-37.

Listing Documents in the catalog Collection in local Database

Exiting the Mongo Shell

To exit the interactive terminal use the “exit” command and exit the MongoDB shell with the “exit” command also as shown in Figure 5-38.

Figure 5-38.

Exiting MongoDB Shell and TTY

Summary

In this chapter we used a Docker image for MongoDB to run a MongoDB instance in a Docker container. We created a database, added collections to the database, and added documents to the collections. We also queried the documents in MongoDB. We demonstrated stopping and starting the Docker container. We also made a backup of a MongoDB database and subsequently restored the database from the backup. In the next chapter we shall discuss running another NoSQL database, Apache Cassandra, in a Docker container.

© Deepak Vohra 2016

Deepak VohraPro Docker10.1007/978-1-4842-1830-3_6

6. Using Apache Cassandra

Deepak Vohra1 

(1)

BC, Canada

Apache Cassandra is a wide-column, open source NoSQL database and the most commonly used NoSQL database in its category. The container of data, equivalent to a database schema in a relational database, in Apache Cassandra is a Keyspace. The basic unit of storage is a column family (also called table), and each record in a table is stored in a row with the data being stored in columns. A column has a name, a value, and a timestamp associated with it. A column is not required to store a value and the column could be empty. Apache Cassandra is based on a flexible schema (or schema-free or dynamic schema) data model in which different rows could have different columns and the columns are not required to be pre-specified in a table definition. Apache Cassandra supports data types for column names (called comparators) and column values (called validators), but does not require the data types (validators and comparators) to be specified. The validators and comparators may be added or modified after a table (column family) has been defined. Apache Cassandra provides a Cassandra Query Language (CQL) for CRUD (add, get, update, delete) operations on a table. Apache Cassandra installation includes a cqlsh utility, which is an interactive shell, from which CQL commands may be run. An official Docker image for Apache Cassandra is available and in this chapter we shall run Apache Cassandra in a Docker container.

Setting the Environment

Starting Apache Cassandra

Starting the TTY

Connecting to CQL Shell

Creating a Keyspace

Altering A Keyspace

Using A Keyspace

Creating a Table

Adding Table Data

Querying a Table

Deleting from a Table

Truncating a Table

Dropping A Table

Dropping a Keyspace

Exiting CQLSh

Stopping Apache Cassandra

Starting Multiple Instances of Apache Cassandra

Setting the Environment

The following software is required for this chapter.

-Docker (version 1.8)

-Docker image for Apache Cassandra

We have used an Amazon EC2 AMI as in other chapters to install Docker and the Docker image. First, SSH to the Amazon EC2 instance.

ssh -i "docker.pem" ec2-user@54.86.243.122

Installing Docker is discussed in Chapter 1. Start the Docker service. The following command should output an OK message.

sudo service docker start

Verify that the Docker service has been started. The following command should output active (running) in the Active field.

sudo service docker status

Output from the preceding commands is shown in Figure 6-1.

Figure 6-1.

Starting Docker Service and verifying Status

Next, download the latest cassandra Docker image.

sudo docker pull cassandra:latest

List the Docker images downloaded.

sudo docker images

The cassandra image should get listed as shown in Figure 6-2.

Figure 6-2.

Listing Docker Image cassandra

Starting Apache Cassandra

Start the Apache Cassandra server process in a Docker container with the following command in which the inter-node Apache Cassandra cluster communication port is specified as 7000 and the directory in which Apache Cassandra stores data is /cassandra/data. The container name is specified with the –name option as cassandradb. The syntax to start a Cassandra instance in detached mode is as follows.

docker run --name some-cassandra -d cassandra:tag

The –d parameter starts the container in a detached mode, implying that an interactive shell is not connected to with the docker run command even if the –t –i options are specified.

sudo docker run -t -i -v /cassandra/data:/var/lib/cassandra/data --name cassandradb -d -p 7000:7000  cassandra

A Docker container running an Apache Cassandra server process gets started as shown in Figure 6-3.

Figure 6-3.

Starting Docker Container for Apache Cassandra

List the running Docker containers with the following command.

sudo docker ps

The cassandradb container, which is running an Apache Cassandra server instance, gets listed. The container id is also listed. By default, port 9042 is the client port on which Apache Cassandra listens for client connections. Port 9160 is Thrift API as shown in Figure 6-4.

Figure 6-4.

Listing Docker Containers that are Running

Starting the TTY

Start the interactive terminal (tty) with the following command.

sudo docker exec -it cassandradb bash

The tty gets connected to and the command prompt gets set to user@containerid. If the user is root and the container id is dfade56f871, the command prompt becomes root@dfade56f871 as shown in Figure 6-5.

Figure 6-5.

Starting the TTY

Connecting to CQL Shell

The cqlsh terminal is used to connect to an Apache Cassandra instance and run CQL commands. Start the cqlsh terminal with the following command.

cqlsh

A connection gets established to the Test Cluster at 127.0.0.1:9042. The Apache Cassandra version gets output as 2.2.2 and the CQL spec version as 3.3.1. The cqlsh> command prompt gets displayed as shown in Figure 6-6.

Figure 6-6.

Connecting the CQL Shell

We started the interactive terminal using the container name, but the tty may also be started using the container id. The cqlsh shell is started with the cqlsh command regardless of how the tty is started.

sudo docker exec –it dfade56f871 bash

cqlsh

The cqlsh> command prompt gets displayed as before as shown in Figure 6-7.

Figure 6-7.

Connecting to CQL Shell using the Container ID

Creating a Keyspace

A Keyspace is the container of application data and is used to group column families. Replication is set at a per-keyspace basis. The DDL command for creating a Keyspace is as follows.

CREATE KEYSPACE (IF NOT EXISTS)? <identifier> WITH <properties>

By default, the keyspace name is case-insensitive and may consist exclusively of alpha-numeric characters with a maximum length of 32. To make a keyspace name case-sensitive add quotes. The supported properties by the CREATE KEYSPACE statement, which creates a top-level keyspace, are replication for specifying the replication strategy and options and durable_writes for whether a commit log is to be used for updates on the keyspace, with the replication property being mandatory. As an example, create a keyspace called CatalogKeyspace with replication strategy class as SimpleStrategy and replication factor as 3.

CREATE KEYSPACE CatalogKeyspace

           WITH replication = {'class': 'SimpleStrategy', 'replication_factor' : 3};

The CatalogKeyspace keyspace gets created as shown in Figure 6-8.

Figure 6-8.

Creating a Keyspace

Altering A Keyspace

The ALTER KEYSPACE statement is used to alter a keyspace and has the following syntax with the supported properties being the same as for the CREATE KEYSPACE statement.

ALTER KEYSPACE <identifier> WITH <properties>

As an example, alter the CatalogKeyspace keyspace to make the replication factor 1.

ALTER KEYSPACE CatalogKeyspace

          WITH replication = {'class': 'SimpleStrategy', 'replication_factor' : 1};

The replication factor gets set to 1 as shown in Figure 6-9.

Figure 6-9.

Altering a Keyspace

Using A Keyspace

The USE statement is used to set the current keyspace and has the following syntax.

USE <identifier>

All subsequent commands are run in the context of the Keyspace set with the USE statement. As an example, set the current Keyspace as CatalogKeyspace.

use CatalogKeyspace;

The cqlsh> command prompt becomes cqlsh:catalogkeyspace> as shown in Figure 6-10.

Figure 6-10.

Using a Keyspace

Creating a Table

A TABLE is also called a COLUMN FAMILY, and the CREATE TABLE or CREATE COLUMN FAMILY statement is used to create a table (column family).

CREATE ( TABLE | COLUMNFAMILY ) ( IF NOT EXISTS )? <tablename>

                          '(' <column-definition> ( ',' <column-definition> )* ')'

                          ( WITH <option> ( AND <option>)* )?

For the complete syntax of the CREATE TABLE statement refer to https://​cassandra.​apache.​org/​doc/​cql3/​CQL.​html#createTableStmt. As an example create a table called ‘catalog’ with columns catalog_id, journal, publisher, edition, title and author all of type text. Specify the primary key as catalog_id and set the compaction class as LeveledCompactionStrategy.

CREATE TABLE catalog(catalog_id text,journal text,publisher text,edition text,title text,author text,PRIMARY KEY (catalog_id)) WITH  compaction = { 'class' : 'LeveledCompactionStrategy' };

The catalog table gets created as shown in Figure 6-11.

Figure 6-11.

Creating a Table

Adding Table Data

The INSERT DML statement is used to add data into a table and has the following syntax.

INSERT INTO <tablename>

                            '(' <identifier> ( ',' <identifier> )* ')'

                     VALUES '(' <term-or-literal> ( ',' <term-or-literal> )* ')'

                     ( IF NOT EXISTS )?

                     ( USING <option> ( AND <option> )* )?

For complete syntax for the INSERT statement refer https://cassandra.apache.org/doc/cql3/CQL.html#insertStmt . As an example add two rows of data to the catalog table and include the IF NOT EXISTS clause to add a row if a row identified by the primary key does not exist.

INSERT INTO catalog (catalog_id, journal, publisher, edition,title,author) VALUES ('catalog1','Oracle Magazine', 'Oracle Publishing', 'November-December 2013', 'Engineering as a Service','David A.  Kelly') IF NOT EXISTS;

INSERT INTO catalog (catalog_id, journal, publisher, edition,title,author) VALUES ('catalog2','Oracle Magazine', 'Oracle Publishing', 'November-December 2013', 'Quintessential and Collaborative','Tom Haunert') IF NOT EXISTS;

As indicated by the [applied] True output, two rows of data get added as shown in Figure 6-12.

Figure 6-12.

Adding Table Data

Querying a Table

The SELECT statement, which has the following syntax, is used to query a table.

SELECT <select-clause>

                  FROM <tablename>

                  ( WHERE <where-clause> )?

                  ( ORDER BY <order-by> )?

                  ( LIMIT <integer> )?

                  ( ALLOW FILTERING )?

For the complete syntax for the SELECT statement refer to https://​cassandra.​apache.​org/​doc/​cql3/​CQL.​html#selectStmt. As an example select all columns from the catalog table.

SELECT * FROM catalog;

The two rows of data added previously get listed as shown in Figure 6-13.

Figure 6-13.

Querying Table

Deleting from a Table

The DELETE statement is used to delete columns and rows and has the following syntax.

DELETE ( <selection> ( ',' <selection> )* )?

                  FROM <tablename>

                  ( USING TIMESTAMP <integer>)?

                  WHERE <where-clause>

                  ( IF ( EXISTS | ( <condition> ( AND <condition> )*) ) )?

For complete syntax for the DELETE statement refer to https://​cassandra.​apache.​org/​doc/​cql3/​CQL.​html#deleteStmt. As an example, delete all columns from the row with catalog_id as catalog1.

DELETE catalog_id, journal, publisher, edition, title, author from catalog WHERE catalog_id='catalog1';

Subsequently, query the catalog table with the SELECT statement.

SELECT * FROM catalog;

Column values from the row with catalog_id as catalog1 get deleted, but the row itself including the primary key column value do not get deleted even though the primary key catalog_id is listed as one of the columns to delete. Subsequent query lists the primary key column value but lists the column values for the other columns as null as shown in Figure 6-14.

Figure 6-14.

Deleting Table Data

Truncating a Table

The TRUNCATE statement removes all data from a table and has the following syntax.

TRUNCATE <tablename>

As an example, truncate the catalog table. Subsequently, run a query with the SELECT statement.

TRUNCATE catalog;

SELECT * from catalog;

As the output of the query indicates, no data is listed because the TRUNCATE statement has removed all data as shown in Figure 6-15.

Figure 6-15.

Truncating a Table

Dropping A Table

The DROP TABLE or DROP COLUMN FAMILY statement is used to drop a table and has the following syntax.

DROP TABLE ( IF EXISTS )? <tablename>

As an example, drop the catalog table.

DROP TABLE IF EXISTS catalog;

If the IF EXISTS clause is not specified and the table does not exist, an error is generated. But with the IF EXISTS clause, an error is not generated as indicated by two consecutively run DROP TABLE statements with the IF EXISTS clause included in Figure 6-16.

Figure 6-16.

Dropping a Table

Dropping a Keyspace

The DROP KEYSPACE statement, which has the following syntax, removes the specified key space including the column families in the key space and the data in the column families, and the keyspace does not have to be empty before being dropped.

DROP KEYSPACE ( IF EXISTS )? <identifier>

As an example, drop the CatalogKeyspace keyspace.

DROP KEYSPACE IF EXISTS CatalogKeyspace;

If the IF EXISTS clause is not specified and the keyspace does not exist, an error is generated. But with the IF EXISTS clause, an error is not generated as indicated by two consecutively run DROP KEYSPACE statements with the IF EXISTS clause included as shown in Figure 6-17.

Figure 6-17.

Dropping a Keyspace

Exiting CQL Shell

To exit the cqlsh shell specify the exit command as shown in Figure 6-18. Subsequently exit the tty with the exit command also.

Figure 6-18.

Exiting CQL Shell

Stopping Apache Cassandra

To stop Apache Cassandra, stop the Docker container running the Apache Cassandra server.

sudo docker stop cassandradb

Subsequently, run the following command to list the running containers.

sudo docker ps

The cassndradb container does not get listed as running as shown in Figure 6-19.

Figure 6-19.

Stopping Cassandra DB Docker Container

Starting Multiple Instances of Apache Cassandra

Multiple Docker containers running Apache Cassandra instances may be started, but the container name has to be unique. As an example, start a new Docker container also called cassandradb to run another instance of Apache Cassandra database.

sudo docker run -t -i -v /cassandra/data:/var/lib/cassandra/data --name cassandradb -d -p 7000:7000  cassandra

Because a Docker container with the same name (cassandradb) was already created earlier, an error is generated even though the container has been stopped as shown in Figure 6-20. A container has to be removed with the docker rm command to be able to create a new container with the same name.

Figure 6-20.

Duplicate Docker Container name error

Another container with a different name, cassandradb2 for example, may be started.

sudo docker run -t -i -v /cassandra/data:/var/lib/cassandra/data --name cassandradb2 -d -p 7000:7000  cassandra

Start a third container and specify the CASSANDRA_SEEDS environment variable for the IP address/es to be used to run multiple nodes in the cluster if required.

sudo docker run -t -i -v /cassandra/data:/var/lib/cassandra/data --name cassandradb3 -d -p 7000:7000 -e CASSANDRA_SEEDS=52.91.214.50,54.86.243.122,54.86.205.95 cassandra

Subsequently, run the following command to list the running containers.

sudo docker ps

The cassandradb2 and cassandradb3 containers get listed as running as shown in Figure 6-21.

Figure 6-21.

Running Multiple Docker Containers for Instances of Apache Cassandra

Summary

In this chapter we use the Docker image for Apache Cassandra to run Apache Cassandra in a Docker container. We used the different CQL statements in a cqlsh shell to create a Keyspace, create a table in the Keyspace and add data to the table. We also ran CQL statements to query a table, delete data from the table, truncate a table, drop a table, and drop a keyspace. We also demonstrated creating multiple Docker containers to run multiple instances of Apache Cassandra. In the next chapter we shall run Couchbase Server in Docker.

© Deepak Vohra 2016

Deepak VohraPro Docker10.1007/978-1-4842-1830-3_7

7. Using Couchbase Server

Deepak Vohra1 

(1)

BC, Canada

Couchbase Server is a distributed NoSQL database. Couchbase is a JSON (JavaScript Object Notation) based document store. Couchbase, like other NoSQL datastores, does not have a fixed schema for data storage. Couchbase differs from MongoDB in that MongoDB is based on the BSON (binary JSON) document data model. Couchbase provides a Web Console for accessing the Couchbase server from a graphical user interface (GUI). Couchbase also provides a command-line interface (CLI) including several tools to run in the CLI. In this chapter we shall run Couchbase server in a Docker container.

Setting the Environment

Starting Couchbase

Accessing Couchbase Web Console

Configuring Couchbase Server

Adding Documents

Starting Interactive Terminal

Running Couchbase CLI Tools

Stopping Couchbase Server

Setting the Environment

The following software is required for this chapter.

-Docker (version 1.8)

-Docker image for Couchbase (version latest)

We have used the Ubuntu Server AMI shown in Figure 7-1 for running software in this chapter. Installing and configuring an Amazon EC2 instance is discussed in Appendix A.

Figure 7-1.

Ubuntu Server AMI

SSH Login to the Ubuntu Amazon EC2 instance using user as “ubuntu” and the public IP address of the Amazon EC2 instance. The public IP address would be different for different users (multiple public IP addresses are also used in this chapter based on multiple runs of the sample discussed).

ssh -i "docker.pem" ubuntu@54.152.90.139

We need to modify the IP address setting for localhost in the hosts IP addresses file /etc/hosts. Set the IP address to the public IP address of the Amazon EC2 instance. Obtaining the public IP address of an Amazon EC2 instance is discussed in Appendix A. Open the /etc/hosts file in a vi editor.

sudo vi /etc/hosts

Replace “127.0.0.1” with the public IP address; replace the following line:

127.0.0.1 localhost

with:

54.152.90.139 localhost

Install Docker on Ubuntu as discussed in Chapter 1. Run the hello-world Docker image to test the Docker installation.

sudo docker run hello-world

The output from the hello-world application is shown in Figure 7-2.

Figure 7-2.

Output from hello-world

Download the official Couchbase Docker image called “couchbase”.

sudo docker pull couchbase

The latest Docker image gets downloaded as shown in Figure 7-3.

Figure 7-3.

Downloading Docker Image couchbase

Starting Couchbase

Next, run a Docker container for Docker image “couchbase”, which would start a Couchbase server process in the Docker container. Run the following docker command in which the port for the Couchbase Web Console to connect to Couchbase Server is specified as 8091. The container name is specified as “couchbasedb”.

sudo docker run --name couchbasedb -d -p 8091:8091 couchbase

Couchbase server could require non-default ulimit settings.

Ulimit Setting

Value

Description

ulimit -n

40960

nofile: max number of open files

ulimit -c

100000000

core: max core file size. The 100000000 setting is equivalent to “unlimited”, which is not directly supported.

ulimit -l

100000000

memlock: maximum locked-in-memory address space. The 100000000 setting is equivalent to “unlimited”, which is not directly supported.

A Docker container stores all persistent data in the /opt/couchbase/var directory, which could be mounted from the host using the –v command parameter. The –ulimit command parameter is used to set the docker run command. Run the following command to run a Docker container to run a Couchbase server as shown in Figure 7-4.

sudo docker run --name couchbasedb -v ∼/couchbase/data:/opt/couchbase/var -d --ulimit nofile=40960:40960 --ulimit core=100000000:100000000 --ulimit memlock=100000000:100000000 -p 8091:8091 couchbase

Subsequently, list the running Docker containers.

sudo docker ps

The couchbasedb container gets listed as shown in Figure 7-4.

Figure 7-4.

Running Docker Container for Couchbase

Output the logs for the container with the docker logs command.

sudo docker logs couchbasedb

The message shown in Figure 7-5 gets displayed.

Figure 7-5.

Listing Docker Container Log

Accessing Couchbase Web Console

Next, we shall access the Couchbase Web Console from the URL indicated in the logs: http://<ip>:8091. The <ip> address to use would vary from which host system the Web Console is accessed. If on the same host as on which the Docker container is running, use the public IP address of the host Amazon EC2 instance. If on a remote host system as we have accessed, use the public DNS for the Amazon EC2 instance. Obtaining the public IP address and the public DNS are discussed in Appendix A. If the public DNS is ec2-54-152-90-139.compute-1.amazonaws.com, the URL to access the Couchbase WebConsole becomes the following.

http://ec2-54-152-90-139.compute-1.amazonaws.com:8091

Open a browser at the preceding URL. The Couchbase Console gets displayed as shown in Figure 7-6. In the next section we shall setup a Couchbase server cluster.

Figure 7-6.

Accessing Couchbase Admin Console

If a Couchbase cluster has already been configured, the Couchbase Console URL would display the login page as shown in Figure 7-7.

Figure 7-7.

Login Page

Specify the Username (Administrator) and the Password and click on Sign In as shown in Figure 7-8.

Figure 7-8.

Specifying Username and Password

Configuring Couchbase Server Cluster

In this section we shall configure the Couchbase Server cluster. Access the Couchbase Web Console as discussed in previous section and shown in Figure 7-6, with URL http://ec2-54-152-90-139.compute-1.amazonaws.com:8091 . Click on Setup in the Web Console; the “Setup” page is displayed only the first time the Web Console is accessed. Subsequently, after a cluster has been configured the Login page is displayed as discussed in the previous section.

Use the default settings for the Configure Disk Storage section. In Configure Server Hostname specify the Hostname as the Public IP Address of the Amazon EC2 instance, which would be different for different users, as shown in Figure 7-9. Short names are not acceptable for the Hostname field and at least one dot is required in the host name.

Figure 7-9.

Configuring Server

Two options are provided in the Join Cluster/ Start new cluster section. As we are configuring a new cluster, select Start a new cluster as shown in Figure 7-10. Select the default settings or modify the settings keeping in consideration the total RAM configurable per server. Click on Next.

Figure 7-10.

Starting a New Cluster

Couchbase server stores data in data buckets. In the Sample Buckets section the sample buckets are listed. A sample bucket is not required to be selected. Click on Next. In the Create Default Bucket screen the Bucket Name is pre-specified as “default”. Select Bucket Type as “Couchbase”. Select the default Memory Size & Replicas settings. Also select the default Disk I/O Optimization setting.

Figure 7-11.

Configuring the Default Cluster

In Flush select Enable and click on Next as shown in Figure 7-12. To be able to flush (delete) data from a bucket, ‘Flush’ must be enabled.

Figure 7-12.

Enabling Flush

In Notifications, select the default settings and the “I agree…” checkbox and click on Next as shown in Figure 7-13.

Figure 7-13.

Configuring Notifications

In Secure this Server screen specify the Username as Administrator (default setting) as shown in Figure 7-14. Specify a password in the Password field and specify the same password in Verify Password field. Click on Next.

Figure 7-14.

Specifying Username and Password

Click on the Cluster Overview tab to display the Cluster summary including the RAM allocated and in use, and the Disk storage allocated and in use as shown in Figure 7-15.

Figure 7-15.

Displaying Cluster Summary

One bucket is shown as Active and one server is shown as Active in Figure 7-16.

Figure 7-16.

Displaying Servers Summary

Click on Server Nodes to list the server nodes. The server running at IP address 172.17.0.1 gets listed as shown in Figure 7-17.

Figure 7-17.

Listing Server IP Address

Click on the Data Buckets tab. The “default” bucket gets listed as shown in Figure 7-18.

Figure 7-18.

Listing the Default Buckets

Adding Documents

In this section we shall add documents to the Couchbase server from the Couchbase Console. Click on the Documents button for the default bucket as shown in Figure 7-19.

Figure 7-19.

Clicking on the Documents button

In the default ➤ Documents no document is listed to start with. Click on Create Document button as shown in Figure 7-20.

Figure 7-20.

Clicking on ‘Create Document’

In the Create Document dialog specify a Document ID, catalog1 for example and click on Create as shown in Figure 7-21.

Figure 7-21.

Creating a Document

A JSON document with Id catalog1 gets added to the default bucket as shown in Figure 7-22. The new document has some default fields, which would probably be required to be modified.

Figure 7-22.

New Document with ID as catalog1

Replace the sample JSON document with the following JSON document.

{

  "journal": "Oracle Magazine",

  "publisher": "Oracle Publishing",

  "edition": "November-December 2013",

  "title": "Quintessential and Collaborative",

  "author": "Tom Haunert"

}

Click on Save to save the modified JSON document as shown in Figure 7-23.

Figure 7-23.

Saving a Couchbase Document

The catalog1 JSON document gets saved and also formatted in the Couchbase Console as shown in Figure 7-24.

Figure 7-24.

Formatted JSON Document

In Couchbase Buckets, the Item Count for the “default” bucket gets listed as 1 as shown in Figure 7-25. Click on the Documents button to display the documents in the default bucket.

Figure 7-25.

Item Count for default Bucket

The catalog1 document gets listed as shown in Figure 7-26. Click on the Edit Document button to display the document JSON if required.

Figure 7-26.

Listing Documents in the default Bucket

Similarly add another document with document id as catalog2. The JSON for catalog2 document is as follows.

{

"journal": "Oracle Magazine",

"publisher": "Oracle Publishing",

"edition": "November December 2013",

"title": "Engineering as a Service",

"author": "David A. Kelly",

}

Add the JSON the sample document for catalog2 as we did for the catalog1 document and click on Save as shown in Figure 7-27.

Figure 7-27.

Adding another JSON Document

The two documents catalog1 and catalog2 get listed as shown in Figure 7-28.

Figure 7-28.

Listing the Two Documents Added

Starting Interactive Terminal

To access the Couchbase server from a command line, start the interactive terminal (tty).

sudo docker exec -it couchbasedb bash

The interactive shell gets started as shown in Figure 7-29.

Figure 7-29.

Starting the Interactive Shell

The interactive terminal may also be started using the container id instead of the container name.

sudo docker exec -it bff916e55a52 bash

Running Couchbase CLI Tools

Couchbase Server provides several command-line interface tools (CLI) to monitor and manage Couchbase server buckets, nodes and cluster.

Some of these CLI tools are the couchbase-cli tool for operations on the entire cluster, the cbbackup tool to create a backup, the cbdocloader tool to load JSON documents, and the cbtransfer tool to transfer data between clusters and data files on the host.

As an example, run the cbtransfer tool to transfer data from the Couchbase server to the stdout with the following command run from the tty.

cbtransfer http://ec2-54-152-90-139.compute-1.amazonaws.com:8091/ stdout:

The two JSON documents previously added to the Couchbase cluster from the Couchbase Console get output the stdout as shown in Figure 7-30.

Figure 7-30.

Running cbtransfer

Stopping Couchbase Server and Container

To stop the Couchbase Server and container, exit the interactive terminal with exit command as shown in Figure 7-31.

Figure 7-31.

Stopping Couchbase Server

In the host system, run the docker stop command to stop the Docker container.

sudo docker stop couchbasedb

Subsequently, list the running Docker containers.

sudo docker ps

The couchbasedb container does not get listed as shown in Figure 7-32.

Figure 7-32.

The Docker Container for couchbasedb does not get listed

Summary

In this chapter we used the official Docker image for Couchbase Server to run a Couchbase Server instance in a Docker container. We accessed the Couchbase Sever from the Couchbase Console and added some JSON documents. Subsequently, we used the cbtransfer CLI tool to output the documents stored to the stdout. In the next chapter we shall discuss using Apache Hadoop.

© Deepak Vohra 2016

Deepak VohraPro Docker10.1007/978-1-4842-1830-3_8

8. Using Apache Hadoop

Deepak Vohra1 

(1)

BC, Canada

Apache Hadoop is the de facto framework for processing large data sets. Apache Hadoop is a distributed software application that runs across several (up to hundreds and thousands) of nodes across a cluster. Apache Hadoop comprises of two main components: Hadoop Distributed File System (HDFS) and MapReduce. The HDFS is used for storing large data sets and MapReduce is used for processing the large data sets. Hadoop is linearly scalable without degradation in performance and makes use of commodity hardware rather than any specialized hardware. Hadoop is designed to be fault tolerant and makes use of data locality by moving the computation to the data rather than data to the computation. MapReduce framework has two versions MapReduce1 (MR1) and MapReduce2 (MR2) (also called YARN). MR1 is the default MapReduce framework in earlier versions of Hadoop (Hadoop 1.x) and YARN is the default in latter versions of Hadoop (Hadoop 2.x).

Setting the Environment

Starting Hadoop

Starting the Interactive Shell

Creating Input Files for a MapReduce Word Count Application

Running a MapReduce Word Count Application

Stopping the Hadoop Docker Container

Using a CDH Docker Image

Setting the Environment

The following software is used in this chapter.

-Docker (version 1.8)

-Apache Hadoop Docker Image

-Cloudera Hadoop (CDH) Docker Image

As in other chapters we have used an Amazon EC2 instance based on Red Hat Enterprise Linux 7.1 (HVM), SSD Volume Type - ami-12663b7a for installing the software. SSH login to the Amazon EC2 instance.

ssh -i "docker.pem" ec2-user@52.23.207.240

Install Docker as discussed in Chapter 1. Start the Docker service.

sudo service docker start

An OK message indicates that the Docker service has been started as shown in Figure 8-1.

Figure 8-1.

Starting the Docker Service

Add a group called “hadoop” and a user called “hadoop”.

groupadd hadoop

useradd -g hadoop hadoop

Several Docker images are available for Apache Hadoop. We have used the sequenceiq/hadoop-docker Docker image available from the Docker Hub. Download the Docker image with label 2.7.0 or the latest tag image if different.

sudo docker pull sequenceiq/hadoop-docker:2.7.0

The docker pull command is shown in Figure 8-2.

Figure 8-2.

Running the docker pull Command

The Docker image sequenceiq/hadoop-docker gets downloaded as shown in Figure 8-3.

Figure 8-3.

Downloading Docker Image sequenceiq/hadoop-docker

Starting Hadoop

Next, start the Hadoop components HDFS and MapReduce. The Docker image sequenceiq/hadoop-docker is configured by default to start the YARN or MR2 framework. Run the following docker run command, which starts a Docker container in detached mode, to start the HDFS (NameNode and DataNode) and YARN (ResourceManager and NodeManager).

sudo docker  run -d --name hadoop sequenceiq/hadoop-docker:2.7.0

Subsequently, list the running Docker containers.

sudo docker ps

The output from the preceding two commands is shown in Figure 8-4 including the running Docker container for Apache Hadoop based on the sequenceiq/hadoop-docker image. The Docker container name is “hadoop” and container id is “27436aa7c645”.

Figure 8-4.

Running Docker Container for Apache Hadoop

Starting the Interactive Shell

Start the interactive shell or terminal (tty) with the following command.

sudo docker exec -it hadoop bash

The interactive terminal prompt gets displayed as shown in Figure 8-5.

Figure 8-5.

Starting Interactive Terminal

The interactive shell may also be started using the container id instead of the container name.

sudo docker exec -it  27436aa7c645 bash

If the –d command parameter is omitted from the docker run command and the –it parameters (which is –i and –t supplied together) are supplied using the following command, the Docker container starts in foreground mode.

sudo docker run -it --name hadoop sequenceiq/hadoop-docker:2.7.0 /etc/bootstrap.sh –bash

The Hadoop components start and attach a console to the Hadoop stdin, stdout and stderr streams as shown in Figure 8-6. A message gets output to the console for each Hadoop component started. The –it parameter starts an interactive terminal (tty).

Figure 8-6.

Starting Docker Container in Foreground

Creating Input Files for a MapReduce Word Count Application

In this section we shall create input files for a MapReduce Word Count application, which is included in the examples packaged with the Hadoop distribution. To create the input files, change the directory (cd) to the $HADOOP_PREFIX directory.

bash-4.1# cd $HADOOP_PREFIX

The preceding command is to be run from the interactive terminal (tty) as shown in Figure 8-7.

Figure 8-7.

Setting Current Directory to $HADOOP_PREFIX Directory

Create a directory called /input in the HDFS for the input files. Subsequently, set the directory permissions to global (777).

bash-4.1# bin/hdfs dfs -mkdir  /input

bash-4.1# bin/hdfs dfs -chmod -R 777 /input

The preceding commands are also run from the interactive terminal as shown in Figure 8-8.

Figure 8-8.

Creating Input Directory

Add two text files (input1.txt and input2.txt) with some sample text to the /input directory. To create a text file input1.txt run the following vi editor command in the tty.

vi input1.txt

Add the following two lines of text in the input1.txt.

Hello World Application for Apache Hadoop

Hello World and Hello Apache Hadoop

Save the input1.txt file with the : wq command as shown in Figure 8-9.

Figure 8-9.

The input1.txt File

Put the input1.txt file in the HDFS directory /input with the following command, also shown in Figure 8-10.

bin/hdfs dfs -put input1.txt /input

The input1.txt file gets added to the /input directory in the HDFS.

Figure 8-10.

Putting the input1.txt in the HDFS

Similarly, open another new text file input2.txt with the following vi command.

vi input2.txt

Add the following two lines of text in the input2.txt file.

Hello World

Hello Apache Hadoop

Save the input2.txt file with the :wq command as shown in Figure 8-11.

Figure 8-11.

The input2.txt File

Put the input2.txt file in the HDFS directory /input.

bin/hdfs dfs -put input2.txt /input

Subsequently, run the following command to run the files in the /input directory.

bin/hdfs –ls /input

The two files added to the HDFS get listed as shown in Figure 8-12.

Figure 8-12.

Listing the Input Files in the HDFS

Running a MapReduce Word Count Application

In this section we shall run a MapReduce application for word count; the application is packaged in the hadoop-mapreduce-examples-2.7.0.jar file and may be invoked with the arg “wordcount”. The wordcount application requires the input and output directories to be supplied. The input directory is the /input directory in the HDFS we created earlier and the output directory is /output, which must not exists before running the hadoop command. Run the following hadoop command from the interactive shell.

bin/hadoop jar $HADOOP_PREFIX/share/hadoop/mapreduce/hadoop-mapreduce-examples-2.7.0.jar wordcount  /input /output

A MapReduce job gets started using the YARN framework as shown in Figure 8-13.

Figure 8-13.

Starting MapReduce Application with YARN Framework

The YARN job completes as shown in Figure 8-14, and the word count application gets output to the /output directory in the HDFS.

Figure 8-14.

Output from the MapReduce Application

The complete output from the hadoop command is as follows.

<mapreduce/hadoop-mapreduce-examples-2.7.0.jar wordcount  /input /output

15/10/18 15:46:17 INFO client.RMProxy: Connecting to ResourceManager at /0.0.0.0:8032

15/10/18 15:46:19 INFO input.FileInputFormat: Total input paths to process : 2

15/10/18 15:46:19 INFO mapreduce.JobSubmitter: number of splits:2

15/10/18 15:46:20 INFO mapreduce.JobSubmitter: Submitting tokens for job: job_1445197241840_0001

15/10/18 15:46:21 INFO impl.YarnClientImpl: Submitted application application_1445197241840_0001

15/10/18 15:46:21 INFO mapreduce.Job: The url to track the job: http://fb25c4cabc55:8088/proxy/application_1445197241840_0001/

15/10/18 15:46:21 INFO mapreduce.Job: Running job: job_1445197241840_0001

15/10/18 15:46:40 INFO mapreduce.Job: Job job_1445197241840_0001 running in uber mode : false

15/10/18 15:46:40 INFO mapreduce.Job:  map 0% reduce 0%

15/10/18 15:47:03 INFO mapreduce.Job:  map 100% reduce 0%

15/10/18 15:47:17 INFO mapreduce.Job:  map 100% reduce 100%

15/10/18 15:47:18 INFO mapreduce.Job: Job job_1445197241840_0001 completed successfully

15/10/18 15:47:18 INFO mapreduce.Job: Counters: 49

        File System Counters

                FILE: Number of bytes read=144

                FILE: Number of bytes written=345668

                FILE: Number of read operations=0

                FILE: Number of large read operations=0

                FILE: Number of write operations=0

                HDFS: Number of bytes read=324

                HDFS: Number of bytes written=60

                HDFS: Number of read operations=9

                HDFS: Number of large read operations=0

                HDFS: Number of write operations=2

        Job Counters

                Launched map tasks=2

                Launched reduce tasks=1

                Data-local map tasks=2

                Total time spent by all maps in occupied slots (ms)=41338

                Total time spent by all reduces in occupied slots (ms)=11578

                Total time spent by all map tasks (ms)=41338

                Total time spent by all reduce tasks (ms)=11578

                Total vcore-seconds taken by all map tasks=41338

                Total vcore-seconds taken by all reduce tasks=11578

                Total megabyte-seconds taken by all map tasks=42330112

                Total megabyte-seconds taken by all reduce tasks=11855872

        Map-Reduce Framework

                Map input records=6

                Map output records=17

                Map output bytes=178

                Map output materialized bytes=150

                Input split bytes=212

                Combine input records=17

                Combine output records=11

                Reduce input groups=7

                Reduce shuffle bytes=150

                Reduce input records=11

                Reduce output records=7

                Spilled Records=22

                Shuffled Maps =2

                Failed Shuffles=0

                Merged Map outputs=2

                GC time elapsed (ms)=834

                CPU time spent (ms)=2760

                Physical memory (bytes) snapshot=540696576

                Virtual memory (bytes) snapshot=2084392960

                Total committed heap usage (bytes)=372310016

        Shuffle Errors

                BAD_ID=0

                CONNECTION=0

                IO_ERROR=0

                WRONG_LENGTH=0

                WRONG_MAP=0

                WRONG_REDUCE=0

        File Input Format Counters

                Bytes Read=112

        File Output Format Counters

                Bytes Written=60

bash-4.1#

List the output files in the /output directory in HDFS with the following command.

bin/hdfs dfs -ls  /output

Two files get listed: _SUCCESS, which indicates that the YARN job completed successfully, and part-r-00000, which is the output from the wordcount application as shown in Figure 8-15.

Figure 8-15.

Files Output by the YARN Application

List the output from the wordcount application using the following command.

hdfs dfs -cat /output/part-r-00000

The word count for each distinct word in the input files input1.txt and input2.txt gets output as shown in Figure 8-16.

Figure 8-16.

Listing the Word Count

Stopping the Hadoop Docker Container

The Docker container running the Hadoop processes may be stopped with the docker stop command.

sudo docker stop hadoop

Subsequently run the docker ps command and no container gets listed as running as shown in Figure 8-17.

Figure 8-17.

Listing Running Docker Containers after stopping Apache Hadoop Container

Using a CDH Docker Image

As mentioned before several Docker images are available for Apache Hadoop. Another Docker image, which we shall also use in subsequent chapters based on the Apache Hadoop Ecosystem as packaged by the Cloudera Hadoop distribution called CDH, is the svds/cdh Docker image. The svds/cdh image includes not just Apache Hadoop but several frameworks in the Apache Hadoop ecosystem, some of which are discussed in later chapters. Download the svds/cdh image with the following command.

sudo docker pull svds/cdh

Start a Docker container running the CDH frameworks.

sudo docker run  -d --name cdh svds/cdh

Start an interactive terminal to run commands for the CDH frameworks.

sudo docker exec -it cdh bash

In the tty, the Hadoop framework applications may be run without further configuration. For example, run the HDFS commands with “hdfs” on the command line. The hdfs commands usage is as listed as follows.

hdfs

The HDFS commands usage gets output as shown in Figure 8-18.

Figure 8-18.

hdfs Command Usage

The configuration files are available in the /etc/hadoop/conf symlink as shown in Figure 8-19.

Figure 8-19.

Listing the Symlink for the Configuration Directory

The configuration files in the /etc/alternatives/hadoop-conf directory to which the conf symlink points are listed as follows as shown in Figure 8-20.

Figure 8-20.

Listing the Configuration Files

The cdh container may be stopped with the docker stop command.

sudo docker stop cdh

Summary

In this chapter we ran Apache Hadoop components in a Docker container. We created some files and put the files in the HDFS. Subsequently, we ran a MapReduce wordcount application packaged with the examples in the Hadoop distribution. We also introduced a Cloudera Hadoop distribution (CDH) based Docker image, which we shall also use in some of the subsequent chapters based on frameworks in the Apache Hadoop ecosystem.

© Deepak Vohra 2016

Deepak VohraPro Docker10.1007/978-1-4842-1830-3_9

9. Using Apache Hive

Deepak Vohra1 

(1)

BC, Canada

Apache Hive is data warehouse framework for storing, managing and querying large data sets. The Hive query language HiveQL is a SQL-like language. Hive stores data in HDFS by default, and a Hive table may be used to define structure on the data. Hive supports two kinds of tables: managed tables and external tables. A managed table is managed by the Hive framework while an external table is not. When a managed table is deleted, the metadata and the table data are deleted. When a Hive external table is deleted, only the metadata is deleted, and the table data is not since the table data is not managed by the Hive framework. Hive makes use of a metastore to store metadata about Hive tables. A Hive metastore database is used for the metastore and is the Derby database by default. The metastore database may be run in embedded mode or remote mode; the default being embedded mode. In this chapter we shall use a Docker image to run Apache Hive in a Docker container.

Setting the Environment

Starting Apache Hive

Connecting to Beeline CLI Shell

Connecting to HiveServer2

Creating a Hive Table

Loading Data into Hive Table

Querying Hive Table

Stopping Apache Hive

Setting the Environment

The following software is required for this chapter.

-Docker (version 1.8 used)

-Docker image for Apache Hive

We have used an Amazon EC2 instance to install the software. Install Docker as discussed in Chapter 1. SSH connect to the Amazon EC2 instance.

ssh -i "docker.pem" ec2-user@52.23.241.186

Start the Docker service and verify status of the Docker service.

sudo service docker start

sudo service docker status

Download the svds/cdh Docker image, which is the same as used in some the other Apache Hadoop Ecosystem chapters on Apache HBase, Apache Sqoop and Apache Spark.

sudo docker pull svds/cdh

Starting Apache Hive

To start Apache Hive, start a Docker container running the cdh processes or components. Run the following docker run command, which starts a Docker container in detached mode and assigns the name “cdh” to the container.

sudo docker run  -d --name cdh svds/cdh

List the running Docker containers; the “cdh” container should be listed.

sudo docker ps

Start an interactive terminal to run Apache Hive shell commands.

sudo docker exec -it cdh bash

Connecting to Beeline CLI Shell

Apache Hive provides the Hive CLI to access HiveServer1 from a command line interface. In latter versions of Hive, HiveServer1 has been deprecated and replaced with HiveServer2, and Hive CLI has been deprecated and replaced with Beeline CLI. While Hive CLI is an Apache Thrift based client, Beeline is a JDBC client based on the SQLLine CLI. With Beeline, the Thrift API is still used but not directly from the client; the Thrift API is used by the JDBC driver to communicate with HiveServer2.

Before using the Hive CLI or the Beeline CLI, we need to modify the permissions for the directory in HDFS in which Hive stores its data, the /user/hive/warehouse directory. Set global permissions (777) on the /user/hive/warehouse directory.

hdfs dfs –chmod –R 777 /user/hive/warehouse

The preceding command is run in the interactive terminal as shown in Figure 9-1.

Figure 9-1.

Setting Permissions on the Hive Warehouse Directory

If the Hive CLI is to be used, run the following command in the interactive terminal.

hive

The Hive CLI is started. A WARNING message is also output indicating that Hive CLI is deprecated and migration to Beeline is recommended as shown in Figure 9-2.

Figure 9-2.

Message about Migration to Beeline

We shall use the Beeline CLI in this chapter. Exit from the Hive CLI with the exit or quit command. Start the Beeline CLI with the following command.

beeline

Beeline version 1.1.0 CDH 5.4.3 gets started as shown in Figure 9-3.

Figure 9-3.

Starting Beeline

Connecting to HiveServer2

We started the Beeline CLI in the previous section, but we are not connected to the HiveServer2 yet. To demonstrate run the following commands.

use default;

show tables;

A “No current connection” message gets output as shown in Figure 9-4.

Figure 9-4.

Message “No Current Connection”

To connect to the HiveServer2, we need to run the !connect command. The !connect commanded usage may be output with the following command.

!connect

The !connect command usage gets output as shown in Figure 9-5.

Figure 9-5.

Command Usage for !connect

HiveServer2 may be connected to in one of two modes: embedded or remote. The embedded mode may be used if the Beeline CLI is run on the same machine on which Hive is installed. The remote mode has to be used if the Beeline CLI is on a remote machine from the Hive. We shall use the embedded mode. The syntax for the connection url is the following in which the dbName is the Hive database and <host> and <port> are the hostname and port number for the HiveServer2.

jdbc:hive2://<host>:<port>/dbName

Run the following Beeline command !connect in which the connection url to HiveServer2 is specified first, followed by the username, password and the Hive JDBC driver. For the default username, password, and Hive JDBC driver specify and empty string “”. The default Hive JDBS driver is org.apache.hive.jdbc.HiveDriver.

!connect jdbc:hive2://localhost:10000/default "" "" ""

A connection to Apache Hive 1.1.0 gets established as shown in Figure 9-6. Apache Hive 1.1.0 version is the renamed Hive 0.15.0 version.

Figure 9-6.

Connecting with Hive2 Server

The Beeline commands that did not run previously get run after connecting to the HiveServer2. Run the following commands again to set the database as “default” and list the Hive tables.

use default

show tables

The database gets set to default and the Hive tables get listed. The database is already the “default” database as specified in the connection url and the use default command is run to demonstrate that the command gets run. No tables get listed as none have been created yet as shown in Figure 9-7. We shall create a table in the next section.

Figure 9-7.

Listing Tables

Creating a Hive Table

In this section we shall create a Hive table called “wlslog” with columns time_stamp, category, type,servername, code and msg, all of type string. Hive makes use of serializers/deserializers also called a Serde. A custom Serde may be used or the native Serde may be used. If a ROW FORMAT is not specified, the native Serde is used. If the ROW FORMAT DELIMITED is specified for delimited data files, the native Serde is used too. To separate fields with a ‘,’ specify FIELDS TERMINATED BY ‘,’ and to terminate a line of data with a newline, specify LINES TERMINATED BY '\n'.

Run the following CREATE TABLE command to create a Hive managed table; the command for a Hive external table is CREATE EXTERNAL TABLE.

CREATE TABLE wlslog(time_stamp STRING,category STRING,type STRING,servername STRING,code STRING,msg STRING) ROW FORMAT DELIMITED FIELDS TERMINATED BY ',' LINES TERMINATED BY '\n';

A Hive table called wlslog gets created as shown in Figure 9-8. We have not used a PRIMARY KEY field in the wlslog table.

Figure 9-8.

Creating Hive Table

Run the following command to describe the wlslog table.

desc wlslog;

The table structure consisting of the column names and data types gets listed as shown in Figure 9-9.

Figure 9-9.

Describing Table Structure

Loading Data into the Hive Table

Next, we shall load data into the Hive table. Run the following INSERT HiveQL statement to add a row of data to the wlslog table.

INSERT INTO TABLE wlslog VALUES ('Apr-8-2014-7:06:16-PM-PDT','Notice','WebLogicServer','AdminServer','BEA-000365','Server state changed to STANDBY');

A MapReduce job gets started to load data into the Hive table as shown in Figure 9-10.

Figure 9-10.

Running the INSERT Command

The MapReduce job consists of 1 mapper and 0 reducers. Data gets loaded into the default.wlslog table as shown in Figure 9-11.

Figure 9-11.

Loading Data into Hive Table

The data in a Hive table is not constrained to have unique column values if a PRIMARY KEY is not specified, which we did not. A row with the same data may be added without a PRIMARY KEY in the table definition. Run the following INSERT statements to add 7 more rows of data including a row of data with duplicate column data.

INSERT INTO TABLE wlslog VALUES ('Apr-8-2014-7:06:16-PM-PDT','Notice','WebLogicServer','AdminServer,BEA-000365','Server state changed to STANDBY');

INSERT INTO TABLE wlslog VALUES ('Apr-8-2014-7:06:17-PM-PDT','Notice','WebLogicServer','AdminServer','BEA-000365','Server state changed to STARTING');

INSERT INTO TABLE wlslog VALUES ('Apr-8-2014-7:06:18-PM-PDT','Notice','WebLogicServer','AdminServer','BEA-000365','Server state changed to ADMIN');

INSERT INTO TABLE wlslog VALUES ('Apr-8-2014-7:06:19-PM-PDT','Notice','WebLogicServer','AdminServer','BEA-000365','Server state changed to RESUMING');

INSERT INTO TABLE wlslog VALUES ('Apr-8-2014-7:06:20-PM-PDT','Notice','WebLogicServer','AdminServer','BEA-000331','Started WebLogic AdminServer');

INSERT INTO TABLE wlslog VALUES ('Apr-8-2014-7:06:21-PM-PDT','Notice','WebLogicServer','AdminServer','BEA-000365','Server state changed to RUNNING');

INSERT INTO TABLE wlslog VALUES ('Apr-8-2014-7:06:22-PM-PDT','Notice','WebLogicServer','AdminServer','BEA-000360','Server started in RUNNING mode');

Querying Hive Table

Having created a Hive table and loaded data into the table, we shall query the table using a SELECT HiveQL statement. Run the following query in the Beeline CLI.

select * from wlslog;

The 8 rows of data get listed as shown in Figure 9-12.

Figure 9-12.

Running a SELECT HiveQL Statement

Stopping Apache Hive

To stop the Apache Hive processes, run the docker stop command to stop the Docker container running the cdh frameworks.

sudo docker stop cdh

Summary

In this chapter we used a Docker image to run CDH frameworks including the Apache Hive framework in a Docker container. We started a Beeline CLI, which has replaced the Hive CLI and connected to the HiveServer2 from the Beeline CLI. We created a Hive managed table and loaded data into the Hive table. Subsequently, we queried the Hive table from the Beeline CLI. In the next chapter we shall use the Apache HBase Database in a Docker container.

© Deepak Vohra 2016

Deepak VohraPro Docker10.1007/978-1-4842-1830-3_10

10. Using Apache HBase

Deepak Vohra1 

(1)

BC, Canada

Apache HBase is the Apache Hadoop database. Apache HBase is based on the wide column data store model with a table as the unit of storage. A table consists of one or more column families. Apache HBase is a schema-free NoSQL database. HBase stores data in the HDFS by default. In this chapter we shall use a Docker image to run Apache HBase in a Docker container. We shall use the svds/cdh Docker image, which we introduced in the Chapter 8.

Setting the Environment

Starting CDH

Starting Interactive Shell

Starting HBase Shell

Creating an HBase Table

Listing HBase Tables

Getting a Single Table Row

Getting a Single Row Column

Scanning a Table

Stopping CDH

Setting the Environment

The following software is required for this chapter.

-Docker (version 1.8 used)

-Docker Image for CDH

As in other chapters we have installed the software on an Amazon EC2 instance. SSH Login to the Amazon EC2 instance.

ssh -i "docker.pem" ec2-user@54.209.254.175

Start the Docker service.

sudo service docker start

Verify that Docker has started.

sudo service docker status

Download the svds/cdh Docker image if not already downloaded for the previous chapter.

sudo docker pull svds/cdh

The svds/cdh:latest Docker image gets downloaded as shown in Figure 10-1.

Figure 10-1.

Downloading the svds/cdh Docker Image

List the Docker images to verify that the svds/cdh image has been downloaded.

sudo docker images

Starting CDH

Start a Docker container to run the Apache Hadoop ecosystem frameworks, which include Apache HBase. Run the docker run command with the –d option, which starts the container in detached mode. The Docker container name is “cdh” as specified with the –name option.

sudo docker run  -d --name cdh svds/cdh

Docker container gets started as shown in Figure 10-2.

Figure 10-2.

Starting Docker Container

List the running Docker containers.

sudo docker ps

The “cdh” container is listed as running as shown in Figure 10-3. The container id is also listed.

Figure 10-3.

Listing the Running Docker Containers

Starting Interactive Shell

Next, start an interactive terminal (tty) to run the HBase shell in.

sudo docker exec -it cdh bash

An interactive terminal gets started and the command prompt becomes root@86f0cf0a5c8d as shown in Figure 10-4.

Figure 10-4.

Starting the Interactive Shell

The interactive shell may also be started using the container id instead of the container name.

sudo docker exec -it 86f0cfoa5c8d bash

Starting HBase Shell

Next, start the HBase shell with the following command run in the interactive terminal.

bin/hbase shell

HBase shell gets started as shown in Figure 10-5.

Figure 10-5.

Starting the HBase Shell

Creating a HBase Table

Create an HBase table using the “create” command. In addition to the table name, provide the column family or column families and a dictionary of specifications for each column family. Optionally, provide a dictionary of table configuration. As an example, create a table called 'wlslog' with a column family called ‘log’.

create 'wlslog', 'log'

HBase table ‘wlslog’ gets created as shown in Figure 10-6.

Figure 10-6.

Creating an HBase Table

Add cell values at table/row/column coordinates using the put command. Add 7 rows of data with the following put commands. Apache HBase and the other Apache Hadoop ecosystem software are designed for large quantities of data, which could be millions of rows of data, but only a sample of data is being added to demonstrate the use of Apache HBase.

put 'wlslog', 'log1', 'log:time_stamp', 'Apr-8-2014-7:06:16-PM-PDT'

put 'wlslog', 'log1', 'log:category', 'Notice'

put 'wlslog', 'log1', 'log:type', 'WeblogicServer'

put 'wlslog', 'log1', 'log:servername', 'AdminServer'

put 'wlslog', 'log1', 'log:code', 'BEA-000365'

put 'wlslog', 'log1', 'log:msg', 'Server state changed to STANDBY'

put 'wlslog', 'log2', 'log:time_stamp', 'Apr-8-2014-7:06:17-PM-PDT'

put 'wlslog', 'log2', 'log:category', 'Notice'

put 'wlslog', 'log2', 'log:type', 'WeblogicServer'

put 'wlslog', 'log2', 'log:servername', 'AdminServer'

put 'wlslog', 'log2', 'log:code', 'BEA-000365'

put 'wlslog', 'log2', 'log:msg', 'Server state changed to STARTING'

put 'wlslog', 'log3', 'log:time_stamp', 'Apr-8-2014-7:06:18-PM-PDT'

put 'wlslog', 'log3', 'log:category', 'Notice'

put 'wlslog', 'log3', 'log:type', 'WeblogicServer'

put 'wlslog', 'log3', 'log:servername', 'AdminServer'

put 'wlslog', 'log3', 'log:code', 'BEA-000365'

put 'wlslog', 'log3', 'log:msg', 'Server state changed to ADMIN'

put 'wlslog', 'log4', 'log:time_stamp', 'Apr-8-2014-7:06:19-PM-PDT'

put 'wlslog', 'log4', 'log:category', 'Notice'

put 'wlslog', 'log4', 'log:type', 'WeblogicServer'

put 'wlslog', 'log4', 'log:servername', 'AdminServer'

put 'wlslog', 'log4', 'log:code', 'BEA-000365'

put 'wlslog', 'log4', 'log:msg', 'Server state changed to RESUMING'

put 'wlslog', 'log5', 'log:time_stamp', 'Apr-8-2014-7:06:20-PM-PDT'

put 'wlslog', 'log5', 'log:category', 'Notice'

put 'wlslog', 'log5', 'log:type', 'WeblogicServer'

put 'wlslog', 'log5', 'log:servername', 'AdminServer'

put 'wlslog', 'log5', 'log:code', 'BEA-000331'

put 'wlslog', 'log5', 'log:msg', 'Started Weblogic AdminServer'

put 'wlslog', 'log6', 'log:time_stamp', 'Apr-8-2014-7:06:21-PM-PDT'

put 'wlslog', 'log6', 'log:category', 'Notice'

put 'wlslog', 'log6', 'log:type', 'WeblogicServer'

put 'wlslog', 'log6', 'log:servername', 'AdminServer'

put 'wlslog', 'log6', 'log:code', 'BEA-000365'

put 'wlslog', 'log6', 'log:msg', 'Server state changed to RUNNING'

put 'wlslog', 'log7', 'log:time_stamp', 'Apr-8-2014-7:06:22-PM-PDT'

put 'wlslog', 'log7', 'log:category', 'Notice'

put 'wlslog', 'log7', 'log:type', 'WeblogicServer'

put 'wlslog', 'log7', 'log:servername', 'AdminServer'

put 'wlslog', 'log7', 'log:code', 'BEA-000360'

put 'wlslog', 'log7', 'log:msg', 'Server started in RUNNING mode'

Data gets added to the ‘wlslog’ table as shown in Figure 10-7.

Figure 10-7.

Adding Data to HBase Table

Listing HBase Tables

List the tables with the following command run in HBase shell.

list

One table, the ‘wlslog’ table, gets listed as shown in Figure 10-8.

Figure 10-8.

Listing HBase Tables

Getting A Single Table Row

The get command is used to get the data in a row or a column cell. Run the following get command to get the data in row 'log7' in table 'wlslog'.

get 'wlslog', 'log7'

A single row of data gets listed as shown in Figure 10-9.

Figure 10-9.

Getting a Single Table Row

Getting A Single Row Column

Optionally, a dictionary of columns may be supplied to the get command. For example, get the column data from the wlslog table from the 'log5' row in the log.msg column.

get  'wlslog', 'log5', {COLUMNS=>['log:msg']}

The log.msg column data from row ‘log5’ from table ‘wlslog’ gets output as shown in Figure 10-10.

Figure 10-10.

Getting a Single Row Column Value

Scanning a Table

The scan command is used to scan a table to get all the data in the table. Optionally a dictionary of scanner specifications may be provided, which are omitted from the following command.

scan 'wlslog'

Row ➤ column data for each row gets output as shown in Figure 10-11.

Figure 10-11.

Scanning a HBase Table

The 7 rows of data get output as shown in Figure 10-12.

Figure 10-12.

Output from the scan Command

Stopping CDH

To stop the Docker container, run the docker stop command for the “cdh” container.

sudo docker stop cdh

Alternatively, the container id may be specified.

sudo docker stop  86f0cfoa5c8d

Summary

In this chapter we used a Docker image to run CDH frameworks in a Docker container. We started an interactive terminal and started an HBase shell in the tty. In the HBase shell, we used the create command to create a table. We used the put command to put data in the table. Subsequently, we used the get command to get the data added. We also ran the scan command to scan the complete table and list all the data in the table. In the next chapter we shall run Apache Sqoop in a Docker container.

© Deepak Vohra 2016

Deepak VohraPro Docker10.1007/978-1-4842-1830-3_11

11. Using Apache Sqoop

Deepak Vohra1 

(1)

BC, Canada

Apache Sqoop is a Hadoop ecosystem framework for transferring bulk data from a relational database (RDBMS) to Hadoop Distributed File System (HDFS), Apache HBase, and Apache Hive. Sqoop also supports bulk data transfer from HDFS to a RDBMS. The direct data transfer paths supported by Sqoop are shown in Figure 11-1. Sqoop supports HSQLDB (version 1.8.0+), MySQL (5.0+), Oracle (10.2.0) and PostgreSQL (8.3+) and may also be usable with other relational databases such as IBM DB2 database and versions. Sqoop makes use of JDBC for data transfer and requires Java to be installed and the JDBC driver jar to be in the runtime classpath.

Figure 11-1.

Direct Transfer Paths supported by Sqoop

In this chapter we shall use Apache Sqoop to import data into HDFS from MySQL database. We shall also export the data from HDFS back to a MySQL database table.

Setting the Environment

Starting Docker Containers

Starting Interactive Terminals

Creating a MySQL Tables

Adding MySQL JDBC Jar to Sqoop Classpath

Configuring Apache Hadoop

Importing MySQL Table Data into HDFS with Sqoop

Listing Data Imported into HDFS

Exporting from HDFS to MySQL with Sqoop

Querying Exported Data

Stopping and Removing Docker Containers

Setting the Environment

The following software is required for this chapter.

-Docker Engine (version 1.8)

-Docker image for MySQL Database

-Docker image for CDH

SSH connect to an Amazon EC2 instance.

ssh -i "docker.pem" ec2-user@54.175.13.99

Install Docker if not already installed as discussed in Chapter 1. Start the Docker service and verify that Docker has been started.

sudo service docker start

sudo service docker status

Download jdk-8u65-linux-x64.gz from http://​www.​oracle.​com/​technetwork/​java/​javase/​downloads/​jdk8-downloads-2133151.​html. As JDK download requires a BSD license to be accepted, downloading with wget or similar software for downloading files makes the download command a non-standard command. Download jdk-8u65-linux-x64.gz using a browser and copy to the EC2 instance using a scp command such as the following.

scp -i "docker.pem" /jdk-8u65-linux-x64.gz ec2-user@54.175.13.99:/

We need to download two Docker images for this chapter because the Docker image for CDH, which includes Apache Sqoop, does not include MySQL Server. Download the mysql Docker image with the docker pull command.

sudo docker pull mysql

Download the svds/cdh Docker image.

sudo docker pull svds/cdh

List the Docker images with the docker images command.

sudo docker images

Both the mysql and svds/cdh Docker images should get listed as shown in Figure 11-2.

Figure 11-2.

Listing Docker Images Required for Apache Sqoop with MySQL Database

Starting Docker Containers

Both the mysql and svds/cdh Docker images have been discussed in earlier chapters separately and used to start Docker containers. But, using the two Docker images is slightly different and requires the two Docker containers to be linked. In this section we shall start two separate Docker containers: cdh for the cdh Docker image, and mysqldb for the mysql Docker image. For the mysqldb container, create a directory for the data stored by MySQL and set its permissions to global (777).

sudo mkdir -p /mysql/data

sudo chmod -R 777 /mysql/data

The preceding commands are to be run when connected to the Amazon EC2 instance as shown in Figure 11-3.

Figure 11-3.

Creating Directory for MySQL Data

The environment variables used in the docker run command are discussed in the following table, Table 11-1.

Table 11-1.

Environment Variables for a Docker container based on mysql Docker Image

Environment Variable

Description

Value

MYSQL_DATABASE

MySQL database instance to be created.

mysqldb

MYSQL_USER

Username for the database created.

mysql

MYSQL_PASSWORD

Password for the database created.

mysql

MYSQL_ALLOW_EMPTY_PASSWORD

Is empty password to be allowed.

no

MYSQL_ROOT_PASSWORD

Password for “root” user.

mysql

Run the following docker run command to start a Docker container for MySQL Database. The environment variables are only set in the docker run command and not in the bash shell.

sudo docker run -v /mysql/data:/var/lib/mysql --name mysqldb -e MYSQL_DATABASE='mysqldb' -e MYSQL_USER='mysql' -e MYSQL_PASSWORD='mysql' -e MYSQL_ALLOW_EMPTY_PASSWORD='no' -e MYSQL_ROOT_PASSWORD='mysql' -d mysql

Run the following docker run command to start a Docker container for svds/cdh image software, which includes Apache Sqoop, and link the container with the mysqldb container running the MySQL database using the --link command parameter.

sudo docker run  -d --name cdh --link mysqldb svds/cdh

List the running Docker containers.

sudo docker ps

The output from the preceding commands is shown in Figure 11-4. Both the cdh and mysqldb containers are listed as started.

Figure 11-4.

Starting Docker Containers for CDH and MySQL

Starting Interactive Terminals

Having started the Docker containers, start the interactive terminals (tty) for the each of the Docker containers. Start the interactive shell for the mysqldb container with the following command.

sudo docker exec -it mysqldb bash

Start the interactive shell for the cdh container with the following command.

sudo docker exec -it cdh bash

Creating a MySQL Tables

In this section we shall login to the MySQL CLI and create a database table, which shall be imported into HDFS with Apache Sqoop. Run the following command to login into MySQL CLI.

mysql –u mysql –p

The mysql> prompt gets displayed as shown in Figure 11-5.

Figure 11-5.

Starting the MySQL CLI Shell

Set the database to use as “mysqldb”.

use mysqldb

Grant all privileges on the mysqldb database to the mysql user with the GRANT option.

GRANT ALL PRIVILEGES ON mysqldb.* TO 'mysql'@'%' IDENTIFIED BY 'mysql' WITH GRANT OPTION;

Privileges get set on the mysqldb database as shown in Figure 11-6.

Figure 11-6.

Setting Privileges on mysqldb Database

Next, create a database table called wlslog with columns time_stamp, category, type, servername, code and msg. The PRIMARY KEY column is required to be included for sqoop import tool to import data into HDFS. Run the following SQL command in MySQL CLI.

CREATE TABLE wlslog(time_stamp VARCHAR(255) PRIMARY KEY,category VARCHAR(255),type VARCHAR(255),servername VARCHAR(255), code VARCHAR(255),msg VARCHAR(255));

A database table called wlslog gets created as shown in Figure 11-7.

Figure 11-7.

Creating a MySQL Database Table

Add data to the wlslog table. Run the following INSERT SQL statements to add data to the wlslog table.

INSERT INTO wlslog(time_stamp,category,type,servername,code,msg) VALUES('Apr-8-2014-7:06:16-PM-PDT','Notice','WebLogicServer','AdminServer','BEA-000365','Server state changed to STANDBY');

INSERT INTO wlslog(time_stamp,category,type,servername,code,msg) VALUES('Apr-8-2014-7:06:17-PM-PDT','Notice','WebLogicServer','AdminServer','BEA-000365','Server state changed to STARTING');

INSERT INTO wlslog(time_stamp,category,type,servername,code,msg) VALUES('Apr-8-2014-7:06:18-PM-PDT','Notice','WebLogicServer','AdminServer','BEA-000365','Server state changed to ADMIN');

INSERT INTO wlslog(time_stamp,category,type,servername,code,msg) VALUES('Apr-8-2014-7:06:19-PM-PDT','Notice','WebLogicServer','AdminServer','BEA-000365','Server state changed to RESUMING');

INSERT INTO wlslog(time_stamp,category,type,servername,code,msg) VALUES('Apr-8-2014-7:06:20-PM-PDT','Notice','WebLogicServer','AdminServer','BEA-000361','Started WebLogic AdminServer');

INSERT INTO wlslog(time_stamp,category,type,servername,code,msg) VALUES('Apr-8-2014-7:06:21-PM-PDT','Notice','WebLogicServer','AdminServer','BEA-000365','Server state changed to RUNNING');

Output from the preceding SQL statements is shown in Figure 11-8.

Figure 11-8.

Running INSERT SQL Statements

Run the following SQL query to list the data added.

SELECT * FROM wlslog;

The 6 rows of data get listed as shown in Figure 11-9.

Figure 11-9.

Running a SQL Query

We need to create another database table for the sqoop export tool to export data from HDFS into MySQL database. Because the wlslog table already has data create another table called WLSLOG_COPY, which has the same table definition as the wlslog table. Run the following SQL script in MySQL CLI.

CREATE TABLE WLSLOG_COPY(time_stamp VARCHAR(255) PRIMARY KEY,category VARCHAR(255),type VARCHAR(255),servername VARCHAR(255), code VARCHAR(255),msg VARCHAR(255));

The WLSLOG_COPY table gets created as shown in Figure 11-10.

Figure 11-10.

Creating MySQL Table WLSLOG_COPY

Adding MySQL JDBC Jar to Sqoop Classpath

We need to add the MySQL JDBC jar to the Apache Sqoop classpath. Start the interactive terminal for the cdh container if not already started.

sudo docker exec -it cdh bash

In the interactive shell, download the mysql-connector-java-5.1.37.jar and copy the jar to the /usr/lib/sqoop/lib directory.

wget http://central.maven.org/maven2/mysql/mysql-connector-java/5.1.37/mysql-connector-java-5.1.37.jar

cp mysql-connector-java-5.1.37.jar /usr/lib/sqoop/lib

The output from the preceding commands is shown in Figure 11-11.

Figure 11-11.

Adding MySQL JDBC Jar to Sqoop Classpath

Setting the JAVA_HOME Environment Variable

For the Apache Sqoop to run we need to set the JAVA_HOME environment variable. But, first we need to copy the jdk-8u65-linux-x64.gz file to the Docker container running the CDH frameworks including Apache Sqoop. We downloaded the jdk-8u65-linux-x64.gz earlier. Copy the jdk-8u65-linux-x64.gz file to the Docker container using the following command in which the container id is obtained from the output of the docker ps command in Figure 11-12.

sudo docker cp jdk-8u65-linux-x64.gz 49d774f8f1fe:/jdk-8u65-linux-x64.gz

The jdk-8u65-linux-x64.gz file gets copied to the Docker container “cdh” as shown in Figure 11-12.

Figure 11-12.

Copying the JDK gz File to Docker Container

The preceding command is to be run from the Amazon EC2 instance. Start the interactive shell for the cdh container.

sudo docker exec -it cdh bash

List the files in the Docker container’s root directory with the following command.

ls –l

The jdk-8u65-linux-x64.gz file gets listed as shown in Figure 11-13.

Figure 11-13.

Listing the files in Docker Container’s root Directory

Extract the jdk-8u65-linux-x64.gz file.

tar -xv jdk-8u65-linux-x64.gz

The .gz file gets extracted as shown in Figure 11-14.

Figure 11-14.

Extracting the JDK .gz File

We need to set the JAVA_HOME environment variable in the hadoop-env.sh file. To find the directory for the hadoop-env.sh file run the following command.

find –name hadoop-env.sh

The different directories containing the hadoop-env.sh file get listed as shown in Figure 11-15.

Figure 11-15.

Finding the hadoop-env.sh File

Open the ./etc/hadoop/conf.psuedo/hadoop-env.sh file in a vi editor and add the following export statement.

export JAVA_HOME=./jdk1.8.0_65

The preceding statement in the hadoop-env.sh file is shown in Figure 11-16. Save the file with the :wq command.

Figure 11-16.

Setting the JAVA_HOME Environment Variable

Configuring Apache Hadoop

Apache Hadoop MapReduce framework may be started in one of the three modes: local, classic and yarn. In the “local” mode, MapReduce runs in a Java process. In the classic mode, MapReduce runs using the MapReduce1 framework. With the yarn mode, MapReduce runs using the MapReduce2 framework (also called YARN). The MapReduce framework to use is set in the mapreduce.framework.name setting in the mapred-site.xml configuration file, which is in the same directory as the hadoop-env.sh, the ./etc/hadoop/conf.psuedo directory. As yarn and classic frameworks require more RAM than the local, set the mapreduce.framework.name to local.

<property>

        <name>mapreduce.framework.name</name>

        <value>local</value>

    </property>

The mapreduce.framework.name setting is shown in Figure 11.17.

Figure 11-17.

Setting the MapReduce Framework to local

Also set the following (Table 11-2) configuration properties in the hdfs-site.xml configuration file.

Table 11-2.

Configuration Properties for hdfs-site.xml

Configuration Property

Description

Value

dfs.permissions.superusergroup

Sets the super user group

hadoop

dfs.namenode.name.dir

Sets the NameNode storage directory

file:///data/1/dfs/nn

dfs.replication

Sets the replication level

1

dfs.permissions

Whether permissions are to be checked

false

The hdfs-site.xml configuration settings are listed below.

<configuration>

<property>

   <name>dfs.permissions.superusergroup</name>

   <value>hadoop</value>

  </property>

  <property>

    <name>dfs.namenode.name.dir</name>

    <value>file:///data/1/dfs/nn</value>

  </property>

  <property>

    <name>dfs.replication</name>

    <value>1</value>

   </property>

   <property>

     <name>dfs.permissions</name>

     <value>false</value>

   </property>

</configuration>

The hdfs-site.xml configuration file is shown in Figure 11-18.

Figure 11-18.

The hdfs-site.xml Configuration File

We need to create the NameNode storage directory set in the dfs.namenode.name.dir property. Create the /data/1/dfs/nn directory and set its permissions to global (777).

sudo mkdir -p /data/1/dfs/nn

sudo chmod -R 777 /data/1/dfs/nn

Create the user group hadoop and a user hadoop.

groupadd hadoop

useradd hadoop

We need to set the following (Table 11-3) configuration properties in the core-site.xml file.

Table 11-3.

Configuration Properties for core-site.xml

Configuration Property

Description

Value

fs.defaultFS

The NameNode URI

hdfs://localhost:8020

hadoop.tmp.dir

The Hadoop temporary directory

file:///var/lib/hadoop-0.20/cache

The core-site.xml configuration settings are listed:

<configuration>

<property>

  <name>fs.defaultFS</name>

    <value>hdfs://10.0.2.15:8020</value>

    </property>

<property>

     <name>hadoop.tmp.dir</name>

     <value>file:///var/lib/hadoop-0.20/cache</value>

  </property>

</configuration>

The core-site.xml file is shown in Figure 11-19. Save the file with :wq.

Figure 11-19.

The core-site.xml Configuration File

Create the directory set in the hadoop.tmp.dir directory and set its permissions to global (777).

mkdir -p /var/lib/hadoop-0.20/cache

chmod -R 777  /var/lib/hadoop-0.20/cache

We also need to set the permissions of the / directory in HDFS to global (777) with the following command.

sudo -u hdfs hdfs dfs -chmod 777 /

Importing MySQL Table Data into HDFS with Sqoop

In this section we shall use the sqoop import command to import MySQL database table data to the HDFS. The different commands supported by the sqoop tool may be listed by running the sqoop help command from the interactive shell for the cdh container as shown in Figure 11-20. The import command is used to import a table from a relational database to HDFS.

Figure 11-20.

Running the sqoop help Command

Running the sqoop import command requires the code to be generated for accessing the relational database. The code may be generated directly while the sqoop import command is run or before the sqoop import command is run using the sqoop codegen command. Run the following sqoop codegen command to generate the code to interact with the database records.

sudo -u hdfs sqoop codegen --connect "jdbc:mysql://e414f8c41d0b:3306/mysqldb"   --password "mysql" --username "mysql" --table "wlslog"

The –u hdfs specifies the user as hdfs. The command parameters are discussed in Table 11-4.

Table 11-4.

Command Parameters for the hdfs Command

Parameter

Description

Value

--connect

The connection url to connect to MySQL database. The hostname is the container id in which MySQL is run.

"jdbc:mysql://e414f8c41d0b:3306/mysqldb"

--password

Password to connect to MySQL. It is recommended to use a non-root user.

"mysql"

--username

Username to connect to MySQL.

"mysql"

--table

MySQL table from which to import from

"wlslog"

The code required to interact with the database gets generated in the wlslog.jar file as shown in Figure 11-21.

Figure 11-21.

Output from the codegen Command

Next, run the sqoop import command as user hdfs. Add the wlslog.jar file in the classpath with the –libjars option.

sudo -u hdfs sqoop import -libjars /tmp/sqoop-hdfs/compile/6348ef9539c8ad2bee9ba1875a62c923/wlslog.jar  --connect "jdbc:mysql://e414f8c41d0b:3306/mysqldb"   --password "mysql" --username "mysql" --table "wlslog" --columns "time_stamp,category,type,servername,code,msg" --target-dir "/mysql/import" –verbose

The other command parameters are discussed in Table 11-5.

Table 11-5.

Command Parameters for sqoop import

Parameter

Description

Value

--connect

The connection url to connect to MySQL database. The hostname is the container id in which MySQL is run.

"jdbc:mysql://e414f8c41d0b:3306/mysqldb"

--password

Password to connect to MySQL. It is recommended to use a non-root user.

"mysql"

--username

Username to connect to MySQL.

"mysql"

--columns

Columns to be imported

"time_stamp,category,type,servername,code,msg"

--table

MySQL table from which to import from

"wlslog"

--target-dir

The HDFS directory in which to import

"/mysql/import"

The output from the sqoop import command is shown in Figure 11-22.

Figure 11-22.

Output from sqoop import

The detailed output from the sqoop import command is listed:

root@08b338cb2a90:/# sudo -u hdfs sqoop import -libjars /tmp/sqoop-hdfs/compile/6348ef9539c8ad2bee9ba1875a62c923/wlslog.jar  --connect "jdbc:mysql://e414f8c41d0b:3306/mysqldb"   --password "mysql" --username "mysql" --table "wlslog" --columns "time_stamp,category,type,servername,code,msg" --target-dir "/mysql/import" -verbose

15/10/22 00:07:07 INFO sqoop.Sqoop: Running Sqoop version: 1.4.5-cdh5.4.3

ConnManager

15/10/22 00:07:10 INFO tool.CodeGenTool: Beginning code generation

15/10/22 00:07:10 DEBUG manager.SqlManager: Execute getColumnInfoRawQuery : SELECT t.* FROM `wlslog` AS t LIMIT 1

15/10/22 00:07:10 DEBUG manager.SqlManager: No connection paramenters specified. Using regular API for making connection.

15/10/22 00:07:11 DEBUG manager.SqlManager: Using fetchSize for next query: -2147483648

15/10/22 00:07:11 INFO manager.SqlManager: Executing SQL statement: SELECT t.* FROM `wlslog` AS t LIMIT 1

15/10/22 00:07:11 DEBUG manager.SqlManager: Found column time_stamp of type [12, 255, 0]

15/10/22 00:07:11 DEBUG manager.SqlManager: Found column category of type [12, 255, 0]

15/10/22 00:07:11 DEBUG manager.SqlManager: Found column type of type [12, 255, 0]

15/10/22 00:07:11 DEBUG manager.SqlManager: Found column servername of type [12, 255, 0]

15/10/22 00:07:11 DEBUG manager.SqlManager: Found column code of type [12, 255, 0]

15/10/22 00:07:11 DEBUG manager.SqlManager: Found column msg of type [12, 255, 0]

15/10/22 00:07:11 DEBUG orm.ClassWriter: selected columns:

15/10/22 00:07:11 DEBUG orm.ClassWriter:   time_stamp

15/10/22 00:07:11 DEBUG orm.ClassWriter:   category

15/10/22 00:07:11 DEBUG orm.ClassWriter:   type

15/10/22 00:07:11 DEBUG orm.ClassWriter:   servername

15/10/22 00:07:11 DEBUG orm.ClassWriter:   code

15/10/22 00:07:11 DEBUG orm.ClassWriter:   msg

15/10/22 00:07:11 DEBUG manager.SqlManager: Using fetchSize for next query: -2147483648

15/10/22 00:07:11 INFO manager.SqlManager: Executing SQL statement: SELECT t.* FROM `wlslog` AS t LIMIT 1

15/10/22 00:07:11 DEBUG manager.SqlManager: Found column time_stamp of type VARCHAR

15/10/22 00:07:11 DEBUG manager.SqlManager: Found column category of type VARCHAR

15/10/22 00:07:11 DEBUG manager.SqlManager: Found column type of type VARCHAR

15/10/22 00:07:11 DEBUG manager.SqlManager: Found column servername of type VARCHAR

15/10/22 00:07:11 DEBUG manager.SqlManager: Found column code of type VARCHAR

15/10/22 00:07:11 DEBUG manager.SqlManager: Found column msg of type VARCHAR

15/10/22 00:07:11 DEBUG orm.ClassWriter: Writing source file: /tmp/sqoop-hdfs/compile/3c3425a2eecf819af8fe8f4eabd40468/wlslog.java

15/10/22 00:07:11 DEBUG orm.ClassWriter: Table name: wlslog

15/10/22 00:07:11 DEBUG orm.ClassWriter: Columns: time_stamp:12, category:12, type:12, servername:12, code:12, msg:12,

15/10/22 00:07:11 DEBUG orm.ClassWriter: sourceFilename is wlslog.java

15/10/22 00:07:11 DEBUG orm.CompilationManager: Found existing /tmp/sqoop-hdfs/compile/3c3425a2eecf819af8fe8f4eabd40468/

15/10/22 00:07:11 INFO orm.CompilationManager: HADOOP_MAPRED_HOME is /usr/lib/hadoop-mapreduce

15/10/22 00:07:11 DEBUG orm.CompilationManager: Returning jar file path /usr/lib/hadoop-mapreduce/hadoop-mapreduce-client-core.jar:/usr/lib/hadoop-mapreduce/hadoop-mapreduce-client-core-2.6.0-cdh5.4.3.jar

15/10/22 00:07:17 DEBUG orm.CompilationManager: Could not rename /tmp/sqoop-hdfs/compile/3c3425a2eecf819af8fe8f4eabd40468/wlslog.java to /./wlslog.java

15/10/22 00:07:17 INFO orm.CompilationManager: Writing jar file: /tmp/sqoop-hdfs/compile/3c3425a2eecf819af8fe8f4eabd40468/wlslog.jar

15/10/22 00:07:17 DEBUG orm.CompilationManager: Scanning for .class files in directory: /tmp/sqoop-hdfs/compile/3c3425a2eecf819af8fe8f4eabd40468

15/10/22 00:07:17 DEBUG orm.CompilationManager: Got classfile: /tmp/sqoop-hdfs/compile/3c3425a2eecf819af8fe8f4eabd40468/wlslog.class -> wlslog.class

15/10/22 00:07:17 DEBUG orm.CompilationManager: Finished writing jar file /tmp/sqoop-hdfs/compile/3c3425a2eecf819af8fe8f4eabd40468/wlslog.jar

15/10/22 00:07:17 WARN manager.MySQLManager: It looks like you are importing from mysql.

15/10/22 00:07:17 WARN manager.MySQLManager: This transfer can be faster! Use the --direct

15/10/22 00:07:17 WARN manager.MySQLManager: option to exercise a MySQL-specific fast path.

15/10/22 00:07:17 INFO manager.MySQLManager: Setting zero DATETIME behavior to convertToNull (mysql)

15/10/22 00:07:17 DEBUG manager.MySQLManager: Rewriting connect string to jdbc:mysql://e414f8c41d0b:3306/mysqldb?zeroDateTimeBehavior=convertToNull

15/10/22 00:07:17 DEBUG manager.CatalogQueryManager: Retrieving primary key for table 'wlslog' with query SELECT column_name FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_SCHEMA = (SELECT SCHEMA()) AND TABLE_NAME = 'wlslog' AND COLUMN_KEY = 'PRI'

15/10/22 00:07:17 DEBUG manager.CatalogQueryManager: Retrieving primary key for table 'wlslog' with query SELECT column_name FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_SCHEMA = (SELECT SCHEMA()) AND TABLE_NAME = 'wlslog' AND COLUMN_KEY = 'PRI'

15/10/22 00:07:17 INFO mapreduce.ImportJobBase: Beginning import of wlslog

15/10/22 00:07:17 INFO Configuration.deprecation: mapred.job.tracker is deprecated. Instead, use mapreduce.jobtracker.address

15/10/22 00:07:17 INFO Configuration.deprecation: mapred.jar is deprecated. Instead, use mapreduce.job.jar

15/10/22 00:07:17 DEBUG db.DBConfiguration: Securing password into job credentials store

15/10/22 00:07:17 DEBUG mapreduce.DataDrivenImportJob: Using table class: wlslog

15/10/22 00:07:17 DEBUG mapreduce.DataDrivenImportJob: Using InputFormat: class com.cloudera.sqoop.mapreduce.db.DataDrivenDBInputFormat

15/10/22 00:07:18 INFO Configuration.deprecation: mapred.map.tasks is deprecated. Instead, use mapreduce.job.maps

15/10/22 00:07:19 INFO jvm.JvmMetrics: Initializing JVM Metrics with processName=JobTracker, sessionId=

15/10/22 00:07:20 DEBUG db.DBConfiguration: Fetching password from job credentials store

15/10/22 00:07:20 INFO db.DBInputFormat: Using read commited transaction isolation

15/10/22 00:07:20 DEBUG db.DataDrivenDBInputFormat: Creating input split with lower bound '1=1' and upper bound '1=1'

15/10/22 00:07:20 INFO mapreduce.JobSubmitter: number of splits:1

15/10/22 00:07:21 INFO mapreduce.JobSubmitter: Submitting tokens for job: job_local2065078437_0001

15/10/22 00:07:25 INFO mapreduce.Job: The url to track the job: http://localhost:8080/

15/10/22 00:07:25 INFO mapreduce.Job: Running job: job_local2065078437_0001

15/10/22 00:07:25 INFO mapred.LocalJobRunner: OutputCommitter set in config null

15/10/22 00:07:25 INFO output.FileOutputCommitter: File Output Committer Algorithm version is 1

15/10/22 00:07:25 INFO mapred.LocalJobRunner: OutputCommitter is org.apache.hadoop.mapreduce.lib.output.FileOutputCommitter

15/10/22 00:07:26 INFO mapred.LocalJobRunner: Waiting for map tasks

15/10/22 00:07:26 INFO mapred.LocalJobRunner: Starting task: attempt_local2065078437_0001_m_000000_0

15/10/22 00:07:26 INFO output.FileOutputCommitter: File Output Committer Algorithm version is 1

15/10/22 00:07:26 INFO mapred.Task:  Using ResourceCalculatorProcessTree : [ ]

15/10/22 00:07:26 DEBUG db.DBConfiguration: Fetching password from job credentials store

15/10/22 00:07:26 INFO db.DBInputFormat: Using read commited transaction isolation

15/10/22 00:07:26 INFO mapred.MapTask: Processing split: 1=1 AND 1=1

15/10/22 00:07:26 DEBUG db.DataDrivenDBInputFormat: Creating db record reader for db product: MYSQL

15/10/22 00:07:26 INFO mapreduce.Job: Job job_local2065078437_0001 running in uber mode : false

15/10/22 00:07:26 INFO mapreduce.Job:  map 0% reduce 0%

15/10/22 00:07:27 INFO db.DBRecordReader: Working on split: 1=1 AND 1=1

15/10/22 00:07:27 DEBUG db.DataDrivenDBRecordReader: Using query: SELECT `time_stamp`, `category`, `type`, `servername`, `code`, `msg` FROM `wlslog` AS `wlslog` WHERE ( 1=1 ) AND ( 1=1 )

15/10/22 00:07:27 DEBUG db.DBRecordReader: Using fetchSize for next query: -2147483648

15/10/22 00:07:27 INFO db.DBRecordReader: Executing query: SELECT `time_stamp`, `category`, `type`, `servername`, `code`, `msg` FROM `wlslog` AS `wlslog` WHERE ( 1=1 ) AND ( 1=1 )

15/10/22 00:07:27 DEBUG mapreduce.AutoProgressMapper: Instructing auto-progress thread to quit.

15/10/22 00:07:27 DEBUG mapreduce.AutoProgressMapper: Waiting for progress thread shutdown…

15/10/22 00:07:27 INFO mapreduce.AutoProgressMapper: Auto-progress thread is finished. keepGoing=false

15/10/22 00:07:27 DEBUG mapreduce.AutoProgressMapper: Progress thread shutdown detected.

15/10/22 00:07:27 INFO mapred.LocalJobRunner:

15/10/22 00:07:27 INFO mapred.Task: Task:attempt_local2065078437_0001_m_000000_0 is done. And is in the process of committing

15/10/22 00:07:27 INFO mapred.LocalJobRunner:

15/10/22 00:07:27 INFO mapred.Task: Task attempt_local2065078437_0001_m_000000_0 is allowed to commit now

15/10/22 00:07:27 INFO output.FileOutputCommitter: Saved output of task 'attempt_local2065078437_0001_m_000000_0' to hdfs://localhost:8020/mysql/import/_temporary/0/task_local2065078437_0001_m_000000

15/10/22 00:07:27 INFO mapred.LocalJobRunner: map

15/10/22 00:07:27 INFO mapred.Task: Task 'attempt_local2065078437_0001_m_000000_0' done.

15/10/22 00:07:27 INFO mapred.LocalJobRunner: Finishing task: attempt_local2065078437_0001_m_000000_0

15/10/22 00:07:27 INFO mapred.LocalJobRunner: map task executor complete.

15/10/22 00:07:28 INFO mapreduce.Job:  map 100% reduce 0%

15/10/22 00:07:28 INFO mapreduce.Job: Job job_local2065078437_0001 completed successfully

15/10/22 00:07:28 INFO mapreduce.Job: Counters: 23

        File System Counters

                FILE: Number of bytes read=17796154

                FILE: Number of bytes written=18238016

                FILE: Number of read operations=0

                FILE: Number of large read operations=0

                FILE: Number of write operations=0

                HDFS: Number of bytes read=0

                HDFS: Number of bytes written=615

                HDFS: Number of read operations=4

                HDFS: Number of large read operations=0

                HDFS: Number of write operations=3

        Map-Reduce Framework

                Map input records=6

                Map output records=6

                Input split bytes=87

                Spilled Records=0

                Failed Shuffles=0

                Merged Map outputs=0

                GC time elapsed (ms)=306

                CPU time spent (ms)=0

                Physical memory (bytes) snapshot=0

                Virtual memory (bytes) snapshot=0

                Total committed heap usage (bytes)=138571776

        File Input Format Counters

                Bytes Read=0

        File Output Format Counters

                Bytes Written=615

15/10/22 00:07:28 INFO mapreduce.ImportJobBase: Transferred 615 bytes in 9.6688 seconds (63.6064 bytes/sec)

15/10/22 00:07:28 INFO mapreduce.ImportJobBase: Retrieved 6 records.

root@08b338cb2a90:/#

Listing Data Imported into HDFS

To list the files generated with the sqoop import tool in the /mysql/import directory, run the following command.

sudo -u hdfs hdfs dfs -ls /mysql/import

Two files get listed: _SUCCESS, which indicates that the sqoop import command completed successfully, and part-m-00000, which has the data imported as shown in Figure 11-23.

Figure 11-23.

Listing Files Generated by sqoop import

List the data in the data file part-m-00000 with the following command.

sudo -u hdfs hdfs dfs -cat /mysql/import/part-m-00000

The data imported with the sqoop import tool gets listed as shown in Figure 11-24.

Figure 11-24.

Listing Data imported by Sqoop

Exporting from HDFS to MySQL with Sqoop

Next, we shall export the data imported into HDFS back to MySQL database. In general the sqoop export tool exports a set of files from HDFS back to an RDBMS where the target table exists already in the database and the input files will be read and parsed into a set of records according to the delimiters specified in the "user-specified" values.

The code required to interact with the database may be generated during the sqoop export command or before the sqoop export command. We shall generate the code before running the sqoop export command using the sqoop codegen command as follows.

sudo -u hdfs sqoop codegen --connect "jdbc:mysql://e414f8c41d0b:3306/mysqldb"   --password "mysql" --username "mysql" --table "WLSLOG_COPY"

The command parameters are the same as for the sqoop codegen command run before the sqoop import command except the table name is WLSLOG_COPY instead of wlslog. The code required by the sqoop export command gets generated in the WLSLOG_COPY.jar file as shown in Figure 11-25.

Figure 11-25.

Running the sqoop codegen Command

Next, run the sqoop export command adding the WLSLOG_COPY.jar in the classpath with the –libjars option. The other command parameters are the same as the sqoop import command except the –table being “WLSLOG_COPY” and the --export-dir option replacing the --target-dir. The directory in the --export-dir option should be the same as the directory in the --data-dir option for the sqoop import command.

sudo -u hdfs sqoop export  -libjars /tmp/sqoop-hdfs/compile/047d0687acbb2298370a7b461cdfdd2e/WLSLOG_COPY.jar --connect "jdbc:mysql://e414f8c41d0b:3306/mysqldb"   --password "mysql" --username "mysql"  --export-dir "/mysql/import" --table "WLSLOG_COPY"   --verbose

The output from the sqoop export command is shown in Figure 11-26.

Figure 11-26.

Output from the sqoop export command

The detailed output from the sqoop export command is listed:

root@08b338cb2a90:/# sudo -u hdfs sqoop export  -libjars /tmp/sqoop-hdfs/compile/047d0687acbb2298370a7b461cdfdd2e/WLSLOG_COPY.jar --connect "jdbc:mysql://e414f8c41d0b:3306/mysqldb"   --password "mysql" --username "mysql"  --export-dir "/mysql/import" --table "WLSLOG_COPY"   --verbose

15/10/22 00:13:52 INFO sqoop.Sqoop: Running Sqoop version: 1.4.5-cdh5.4.3

15/10/22 00:13:54 INFO tool.CodeGenTool: Beginning code generation

15/10/22 00:13:54 DEBUG manager.SqlManager: Execute getColumnInfoRawQuery : SELECT t.* FROM `WLSLOG_COPY` AS t LIMIT 1

15/10/22 00:13:54 DEBUG manager.SqlManager: No connection paramenters specified. Using regular API for making connection.

15/10/22 00:13:55 DEBUG manager.SqlManager: Using fetchSize for next query: -2147483648

15/10/22 00:13:55 INFO manager.SqlManager: Executing SQL statement: SELECT t.* FROM `WLSLOG_COPY` AS t LIMIT 1

15/10/22 00:13:55 DEBUG manager.SqlManager: Found column time_stamp of type [12, 255, 0]

15/10/22 00:13:55 DEBUG manager.SqlManager: Found column category of type [12, 255, 0]

15/10/22 00:13:55 DEBUG manager.SqlManager: Found column type of type [12, 255, 0]

15/10/22 00:13:55 DEBUG manager.SqlManager: Found column servername of type [12, 255, 0]

15/10/22 00:13:55 DEBUG manager.SqlManager: Found column code of type [12, 255, 0]

15/10/22 00:13:55 DEBUG manager.SqlManager: Found column msg of type [12, 255, 0]

15/10/22 00:13:55 DEBUG orm.ClassWriter: selected columns:

15/10/22 00:13:55 DEBUG orm.ClassWriter:   time_stamp

15/10/22 00:13:55 DEBUG orm.ClassWriter:   category

15/10/22 00:13:55 DEBUG orm.ClassWriter:   type

15/10/22 00:13:55 DEBUG orm.ClassWriter:   servername

15/10/22 00:13:55 DEBUG orm.ClassWriter:   code

15/10/22 00:13:55 DEBUG orm.ClassWriter:   msg

15/10/22 00:13:55 DEBUG manager.SqlManager: Using fetchSize for next query: -2147483648

15/10/22 00:13:55 INFO manager.SqlManager: Executing SQL statement: SELECT t.* FROM `WLSLOG_COPY` AS t LIMIT 1

15/10/22 00:13:55 DEBUG manager.SqlManager: Found column time_stamp of type VARCHAR

15/10/22 00:13:55 DEBUG manager.SqlManager: Found column category of type VARCHAR

15/10/22 00:13:55 DEBUG manager.SqlManager: Found column type of type VARCHAR

15/10/22 00:13:55 DEBUG manager.SqlManager: Found column servername of type VARCHAR

15/10/22 00:13:55 DEBUG manager.SqlManager: Found column code of type VARCHAR

15/10/22 00:13:55 DEBUG manager.SqlManager: Found column msg of type VARCHAR

15/10/22 00:13:55 DEBUG orm.ClassWriter: Writing source file: /tmp/sqoop-hdfs/compile/715ce1218221b63dfffd800222f863f0/WLSLOG_COPY.java

15/10/22 00:13:55 DEBUG orm.ClassWriter: Table name: WLSLOG_COPY

15/10/22 00:13:55 DEBUG orm.ClassWriter: Columns: time_stamp:12, category:12, type:12, servername:12, code:12, msg:12,

15/10/22 00:13:55 DEBUG orm.ClassWriter: sourceFilename is WLSLOG_COPY.java

15/10/22 00:13:55 DEBUG orm.CompilationManager: Found existing /tmp/sqoop-hdfs/compile/715ce1218221b63dfffd800222f863f0/

15/10/22 00:13:55 INFO orm.CompilationManager: HADOOP_MAPRED_HOME is /usr/lib/hadoop-mapreduce

15/10/22 00:13:55 DEBUG orm.CompilationManager: Returning jar file path /usr/lib/hadoop-mapreduce/hadoop-mapreduce-client-core.jar:/usr/lib/hadoop-mapreduce/hadoop-mapreduce-client-core-2.6.0-cdh5.4.3.jar

15/10/22 00:14:02 INFO mapreduce.ExportJobBase: Beginning export of WLSLOG_COPY

15/10/22 00:14:02 INFO Configuration.deprecation: mapred.job.tracker is deprecated. Instead, use mapreduce.jobtracker.address

15/10/22 00:14:02 INFO Configuration.deprecation: mapred.jar is deprecated. Instead, use mapreduce.job.jar

15/10/22 00:14:04 DEBUG mapreduce.JobBase: Using InputFormat: class org.apache.sqoop.mapreduce.ExportInputFormat

15/10/22 00:14:04 DEBUG db.DBConfiguration: Securing password into job credentials store

15/10/22 00:14:04 INFO jvm.JvmMetrics: Initializing JVM Metrics with processName=JobTracker, sessionId=

15/10/22 00:14:06 INFO input.FileInputFormat: Total input paths to process : 1

15/10/22 00:14:06 DEBUG mapreduce.ExportInputFormat: Target numMapTasks=4

15/10/22 00:14:06 DEBUG mapreduce.ExportInputFormat: Total input bytes=615

15/10/22 00:14:06 DEBUG mapreduce.ExportInputFormat: maxSplitSize=153

15/10/22 00:14:06 INFO input.FileInputFormat: Total input paths to process : 1

15/10/22 00:14:06 DEBUG mapreduce.ExportInputFormat: Generated splits:

15/10/22 00:14:06 DEBUG mapreduce.ExportInputFormat:   Paths:/mysql/import/part-m-00000:0+153 Locations:08b338cb2a90:;

15/10/22 00:14:06 DEBUG mapreduce.ExportInputFormat:   Paths:/mysql/import/part-m-00000:153+153 Locations:08b338cb2a90:;

15/10/22 00:14:06 DEBUG mapreduce.ExportInputFormat:   Paths:/mysql/import/part-m-00000:306+153 Locations:08b338cb2a90:;

15/10/22 00:14:06 DEBUG mapreduce.ExportInputFormat:   Paths:/mysql/import/part-m-00000:459+78,/mysql/import/part-m-00000:537+78 Locations:08b338cb2a90:;

15/10/22 00:14:06 INFO mapreduce.JobSubmitter: number of splits:4

15/10/22 00:14:06 INFO Configuration.deprecation: mapred.map.tasks.speculative.execution is deprecated. Instead, use mapreduce.map.speculative

15/10/22 00:14:06 INFO mapreduce.JobSubmitter: Submitting tokens for job: job_local1198888838_0001

15/10/22 00:14:11 INFO mapreduce.Job: The url to track the job: http://localhost:8080/

15/10/22 00:14:11 INFO mapreduce.Job: Running job: job_local1198888838_0001

15/10/22 00:14:11 INFO mapred.LocalJobRunner: OutputCommitter set in config null

15/10/22 00:14:11 INFO mapred.LocalJobRunner: OutputCommitter is org.apache.sqoop.mapreduce.NullOutputCommitter

15/10/22 00:14:11 INFO mapred.LocalJobRunner: Waiting for map tasks

15/10/22 00:14:11 INFO mapred.LocalJobRunner: Starting task: attempt_local1198888838_0001_m_000000_0

15/10/22 00:14:11 DEBUG mapreduce.CombineShimRecordReader: ChildSplit operates on: hdfs://localhost:8020/mysql/import/part-m-00000

15/10/22 00:14:11 DEBUG db.DBConfiguration: Fetching password from job credentials store

15/10/22 00:14:12 DEBUG mapreduce.CombineShimRecordReader: ChildSplit operates on: hdfs://localhost:8020/mysql/import/part-m-00000

15/10/22 00:14:12 DEBUG mapreduce.AutoProgressMapper: Instructing auto-progress thread to quit.

15/10/22 00:14:12 DEBUG mapreduce.AutoProgressMapper: Waiting for progress thread shutdown...

15/10/22 00:14:12 INFO mapreduce.AutoProgressMapper: Auto-progress thread is finished. keepGoing=false

15/10/22 00:14:12 DEBUG mapreduce.AutoProgressMapper: Progress thread shutdown detected.

15/10/22 00:14:12 INFO mapred.LocalJobRunner:

15/10/22 00:14:12 DEBUG mapreduce.AsyncSqlOutputFormat: Committing transaction of 1 statements

15/10/22 00:14:12 INFO mapred.Task: Task:attempt_local1198888838_0001_m_000000_0 is done. And is in the process of committing

15/10/22 00:14:12 INFO mapred.LocalJobRunner: map

15/10/22 00:14:12 INFO mapred.Task: Task 'attempt_local1198888838_0001_m_000000_0' done.

15/10/22 00:14:12 INFO mapred.LocalJobRunner: Finishing task: attempt_local1198888838_0001_m_000000_0

15/10/22 00:14:12 INFO mapred.LocalJobRunner: Starting task: attempt_local1198888838_0001_m_000001_0

15/10/22 00:14:12 INFO mapred.Task:  Using ResourceCalculatorProcessTree : [ ]

15/10/22 00:14:12 INFO mapred.MapTask: Processing split: Paths:/mysql/import/part-m-00000:0+153

15/10/22 00:14:12 DEBUG mapreduce.CombineShimRecordReader: ChildSplit operates on: hdfs://localhost:8020/mysql/import/part-m-00000

15/10/22 00:14:12 DEBUG db.DBConfiguration: Fetching password from job credentials store

15/10/22 00:14:12 DEBUG mapreduce.AutoProgressMapper: Instructing auto-progress thread to quit.

15/10/22 00:14:12 DEBUG mapreduce.AutoProgressMapper: Waiting for progress thread shutdown...

15/10/22 00:14:12 INFO mapreduce.AutoProgressMapper: Auto-progress thread is finished. keepGoing=false

15/10/22 00:14:12 DEBUG mapreduce.AutoProgressMapper: Progress thread shutdown detected.

15/10/22 00:14:12 INFO mapred.LocalJobRunner:

15/10/22 00:14:12 DEBUG mapreduce.AsyncSqlOutputFormat: Committing transaction of 1 statements

15/10/22 00:14:12 INFO mapred.Task: Task:attempt_local1198888838_0001_m_000001_0 is done. And is in the process of committing

15/10/22 00:14:12 INFO mapred.LocalJobRunner: map

15/10/22 00:14:12 INFO mapred.Task: Task 'attempt_local1198888838_0001_m_000001_0' done.

15/10/22 00:14:12 INFO mapred.LocalJobRunner: Finishing task: attempt_local1198888838_0001_m_000001_0

15/10/22 00:14:12 INFO mapred.LocalJobRunner: Starting task: attempt_local1198888838_0001_m_000002_0

15/10/22 00:14:12 INFO mapreduce.Job: Job job_local1198888838_0001 running in uber mode : false

15/10/22 00:14:12 INFO mapred.Task:  Using ResourceCalculatorProcessTree : [ ]

15/10/22 00:14:12 INFO mapred.MapTask: Processing split: Paths:/mysql/import/part-m-00000:153+153

15/10/22 00:14:12 DEBUG mapreduce.CombineShimRecordReader: ChildSplit operates on: hdfs://localhost:8020/mysql/import/part-m-00000

15/10/22 00:14:12 INFO mapreduce.Job:  map 100% reduce 0%

15/10/22 00:14:12 DEBUG db.DBConfiguration: Fetching password from job credentials store

15/10/22 00:14:12 DEBUG mapreduce.AutoProgressMapper: Instructing auto-progress thread to quit.

15/10/22 00:14:12 DEBUG mapreduce.AutoProgressMapper: Waiting for progress thread shutdown...

15/10/22 00:14:12 INFO mapreduce.AutoProgressMapper: Auto-progress thread is finished. keepGoing=false

15/10/22 00:14:12 DEBUG mapreduce.AutoProgressMapper: Progress thread shutdown detected.

15/10/22 00:14:12 INFO mapred.LocalJobRunner:

15/10/22 00:14:12 DEBUG mapreduce.AsyncSqlOutputFormat: Committing transaction of 1 statements

15/10/22 00:14:12 INFO mapred.Task: Task:attempt_local1198888838_0001_m_000002_0 is done. And is in the process of committing

15/10/22 00:14:12 INFO mapred.LocalJobRunner: map

15/10/22 00:14:12 INFO mapred.Task: Task 'attempt_local1198888838_0001_m_000002_0' done.

15/10/22 00:14:12 INFO mapred.LocalJobRunner: Finishing task: attempt_local1198888838_0001_m_000002_0

15/10/22 00:14:12 INFO mapred.LocalJobRunner: Starting task: attempt_local1198888838_0001_m_000003_0

15/10/22 00:14:12 INFO mapred.Task:  Using ResourceCalculatorProcessTree : [ ]

15/10/22 00:14:12 INFO mapred.MapTask: Processing split: Paths:/mysql/import/part-m-00000:306+153

15/10/22 00:14:12 DEBUG mapreduce.CombineShimRecordReader: ChildSplit operates on: hdfs://localhost:8020/mysql/import/part-m-00000

15/10/22 00:14:12 DEBUG db.DBConfiguration: Fetching password from job credentials store

15/10/22 00:14:12 DEBUG mapreduce.AutoProgressMapper: Instructing auto-progress thread to quit.

15/10/22 00:14:12 DEBUG mapreduce.AutoProgressMapper: Waiting for progress thread shutdown...

15/10/22 00:14:12 INFO mapreduce.AutoProgressMapper: Auto-progress thread is finished. keepGoing=false

15/10/22 00:14:12 DEBUG mapreduce.AutoProgressMapper: Progress thread shutdown detected.

15/10/22 00:14:12 INFO mapred.LocalJobRunner:

15/10/22 00:14:12 DEBUG mapreduce.AsyncSqlOutputFormat: Committing transaction of 1 statements

15/10/22 00:14:12 INFO mapred.Task: Task:attempt_local1198888838_0001_m_000003_0 is done. And is in the process of committing

15/10/22 00:14:12 INFO mapred.LocalJobRunner: map

15/10/22 00:14:12 INFO mapred.Task: Task 'attempt_local1198888838_0001_m_000003_0' done.

15/10/22 00:14:12 INFO mapred.LocalJobRunner: Finishing task: attempt_local1198888838_0001_m_000003_0

15/10/22 00:14:12 INFO mapred.LocalJobRunner: map task executor complete.

15/10/22 00:14:13 INFO mapreduce.Job: Job job_local1198888838_0001 completed successfully

15/10/22 00:14:13 INFO mapreduce.Job: Counters: 23

        File System Counters

                FILE: Number of bytes read=71190614

                FILE: Number of bytes written=72948608

                FILE: Number of read operations=0

                FILE: Number of large read operations=0

                FILE: Number of write operations=0

                HDFS: Number of bytes read=4068

                HDFS: Number of bytes written=0

                HDFS: Number of read operations=86

                HDFS: Number of large read operations=0

                HDFS: Number of write operations=0

        Map-Reduce Framework

                Map input records=6

                Map output records=6

                Input split bytes=576

                Spilled Records=0

                Failed Shuffles=0

                Merged Map outputs=0

                GC time elapsed (ms)=0

                CPU time spent (ms)=0

                Physical memory (bytes) snapshot=0

                Virtual memory (bytes) snapshot=0

                Total committed heap usage (bytes)=576782336

        File Input Format Counters

                Bytes Read=0

        File Output Format Counters

                Bytes Written=0

15/10/22 00:14:13 INFO mapreduce.ExportJobBase: Transferred 3.9727 KB in 8.722 seconds (466.4067 bytes/sec)

15/10/22 00:14:13 INFO mapreduce.ExportJobBase: Exported 6 records.

root@08b338cb2a90:/#

Querying Exported Data

Having exported from HDFS to MySQL, use the following SELECT statement in MySQL CLI to query the data exported.

select * from WLSLOG_COPY;

The six rows of data exported get listed as shown in Figure 11-27.

Figure 11-27.

Querying Exported Data in WLSLOG_COPY

Stopping and Removing Docker Containers

To remove the mysqldb and cdh containers the containers have to be first stopped. Stop the mysqldb container with the docker stop command.

sudo docker stop mysqldb

Remove the mysqldb container with the docker rm command.

sudo docker rm mysqldb

The mysqldb container gets stopped and removed as shown in Figure 11-28.

Figure 11-28.

Stopping and Removing Docker Container for MySQL Database

Similarly stop and remove the cdh container.

sudo docker stop cdh

sudo docker rm cdh

The cdh container gets stopped and removed as shown in Figure 11-29.

Figure 11-29.

Stopping and Removing Docker Container for CDH

Summary

In this chapter we used Docker images for CDH and MySQL database to run two separate, but linked, Docker containers. We created a MySQL database in the Docker container and ran the sqoop import tool in the CDH container to import data from MySQL to HDFS. Subsequently we ran the sqoop export tool to export from HDFS to MySQL database. In the next chapter we shall discuss Apache Kafka.

© Deepak Vohra 2016

Deepak VohraPro Docker10.1007/978-1-4842-1830-3_12

12. Using Apache Kafka

Deepak Vohra1 

(1)

BC, Canada

Apache Kafka is a messaging system based on the publish-subscribe model. A Kafka cluster consists of one or more servers called brokers. Kafka keeps messages categorized by “topics”. Producers produce messages and publish the messages to topics. Consumers subscribe to specific topic/s and consume feeds of messages published to the topic/s. The messages published to a topic do not have to be consumed as produced and are stored in the topic for a configurable duration. A consumer may choose to consume the messages in a topic from the beginning. Apache ZooKeeper server is used to coordinate a Kafka cluster. The Kafka architecture is illustrated in Figure 12-1.

Figure 12-1.

Apache Kafka Architecture

Apache Kafka is not directly based on Apache Hadoop nor does it make use of Apache Hadoop. But Kafka could be used as an Apache Flume source, channel, or sink. In this chapter we shall make use of a Docker image to run Apache Kafka in a Docker container. This chapter has the following sections.

Setting the Environment

Starting Docker Containers for Apache Kafka

Finding IP Addresses

Listing the Kafka Logs

Creating a Kafka Topic

Starting the Kafka Producer

Starting the Kafka Consumer

Producing and Consuming Messages

Stopping and Removing the Docker Containers

Setting the Environment

The following software is required for this chapter.

-Docker (version 1.8)

-Docker image for Apache ZooKeeper (version latest)

-Docker image for Apache Kafka (version latest)

Connect to an Amazon EC2 instance on which the software is to be installed; the Public IP Address would be different for different users.

ssh -i "docker.pem" ec2-user@52.91.168.33

Install Docker and start the Docker service.

sudo service docker start

An OK message indicates that Docker has been started as shown in Figure 12-2.

Figure 12-2.

Starting Docker Service

Download the Docker image dockerkafka/zookeeper for Apache ZooKeeper.

sudo docker pull dockerkafka/zookeeper

The Docker image gets downloaded as shown in Figure 12-3.

Figure 12-3.

Downloading dockerkafka/zookeeper Docker Image

The dockerkafka/zookeeper image has been selected for download because a corresponding dockerkafka/kafka image is also available. Download the Docker image dockerkafka/kafka also.

sudo  docker pull dockerkafka/kafka

Docker image dockerkafka/kafka gets downloaded as shown in Figure 12-4.

Figure 12-4.

Downloading the dockerkafka/kafka Docker Image

Starting Docker Containers for Apache Kafka

We need to start both Apache ZooKeeper and Apache Kafka containers as both are required for a Kafka cluster. First, start a Docker container for Apache ZooKeeper using the following docker run command in which the port for ZooKeeper is set to 2181. The Docker container is started in detached mode with the –d option.

sudo docker run -d --name zookeeper -p 2181:2181  dockerkafka/zookeeper

Next, start the Docker container for the Kafka server using the dockerkafka/kafka image. Specify the port for the Kafka server as 9092 and link the Kafka container with the container running the ZooKeeper using –link parameter.

sudo docker run --name kafka  -p 9092:9092 --link zookeeper:zookeeper  dockerkafka/kafka

List the running containers with the docker ps command.

sudo docker ps

The two containers, one for Apache ZooKeeper and the other for Apache Kafka get listed as shown in Figure 12-5.

Figure 12-5.

Listing Running Docker Containers

Finding IP Addresses

To run the Kakfa Producer and Consumer, we need to find the IP address of the Docker container running the ZooKeeper and IP address of the Docker container running the Kafka server. Run the following two commands to export the ZK_IP and KAFKA_IP environment variables.

export ZK_IP=$(sudo docker inspect --format '{{ .NetworkSettings.IPAddress }}' zookeeper)

export KAFKA_IP=$(sudo docker inspect --format '{{ .NetworkSettings.IPAddress }}' kafka)

Subsequently, echo the ZK_IP and KAFKA_IP variables. The ZK_IP is output as 172.17.0.1 and the KAFKA_IP is output as 172.17.0.2 as shown in Figure 12-6. We shall use these IP addresses in subsequent sections.

Figure 12-6.

Finding IP Addresses for Zookeeper and Kafka Servers

Listing the Kafka Logs

Output the logs for the Docker container “kafka” with the docker logs command.

sudo docker logs -f kafka

The output indicates that the Kafka server got started as shown in Figure 12-7.

Figure 12-7.

Listing Kafka Logs

In subsequent sections we shall create a Kafka topic, start a Kafka producer, start a Kafka consumer and produce messages at the Kafka Producer to be published at a Kafka topic, and consume the messages at the Kafka Consumer.

Creating a Kafka Topic

First, we need to create a Kafka topic to publish messages to. Start the interactive terminal with the following command.

sudo docker exec -it kafka bash

Create a Kafka topic in the interactive terminal with the kafka-topics. sh –create command. Specify the topic to create with the –topic option as “test”. Specify the ZooKeeper address as the IP address for the ZooKeeper obtained earlier and set in the environment variable ZK_IP. Specify the ZooKeeper port as 2181. The number of partitions is set to 1 with the --partitions option, and the replication factor is set to 1 with the --replication-factor option.

kafka-topics.sh --create --topic test --zookeeper 172.17.0.1:2181 --replication-factor 1 --partitions 1

The output from the command is Created topic “test” as shown in Figure 12-8.

Figure 12-8.

Creating a Kafka topic

Starting the Kafka Producer

Next, start the Kafka producer with the following command from an interactive terminal for the “kafka” container running the Kafka server. The broker list is specified as 172.17.0.2:9092 in which the IP address is the environment variable KAFKA_IP exported earlier. The port Kafka server listens on is 9092. The topic to which the messages are to be published is set with the –topic option as “test”.

kafka-console-producer.sh --topic test --broker-list 172.17.0.2:9092

Kafka producer console gets started as shown in Figure 12-9.

Figure 12-9.

Starting the Kafka Producer

Starting the Kafka Consumer

For the Kafka Consumer console we need to start another interactive terminal for the “kafka” container.

sudo docker exec -it kafka bash

Run the following command to start the Kafka consumer console to consume messages published to the “test” topic as specified with the –topic option. The ZooKeeper host:port is set with the –zookeeper option to 172.17.0.1:2181 in which the IP Address is the environment variable ZK_IP and the port is 2181. The --from-beginning option implies that messages are to be consumed from the beginning.

kafka-console-consumer.sh --topic test --from-beginning --zookeeper 172.17.0.1:2181

The Kafka consumer console gets started as shown in Figure 12-10.

Figure 12-10.

Starting the Kafka Consumer

Producing and Consuming Messages

In this section we shall publish messages from the Kafka Producer to the Kafka topic “test” configured when we started the Producer, and consume the messages at the Kafka consumer also subscribed to the “test” topic.

Publish a message “Hello Kafka from Docker” at the Producer console as shown in Figure 12-11. Click on Enter to navigate to the next line in the console.

Figure 12-11.

Producing a Message at the Kafka Producer

The message published to the “test” topic gets consumed at the Kafka Consumer and gets output in the Consumer console as shown in Figure 12-12.

Figure 12-12.

Consuming Messages at the Consumer

Similarly, publish more messages to the “test” topic from the Kafka Producer as shown in Figure 12-13.

Figure 12-13.

Producing More Messages at the Producer

The messages get output at the Kafka Consumer console as shown in Figure 12-14.

Figure 12-14.

Consumming Messages

Stopping and Removing the Docker Containers

To stop the Docker containers, run the docker stop command. Stop the “kafka” container as follows.

sudo docker stop kafka

The “kafka” container may be removed with the docker rm command.

sudo docker rm kafka

Similarly, stop and remove the Docker container “zookeeper”.

sudo docker stop zookeeper

sudo docker rm zookeeper

Summary

In this chapter we used Docker containers for Apache ZooKeeper and Apache Kafka to run a Kafka server process linked to an Apache ZooKeeper process. We created a Kafka Topic, started a Kafka producer, started a Kafka Consumer, published messages to the topic from the Kafka producer and consumed the messages at the Consumer. In the next chapter we shall discuss using Apache Solr with Docker.

© Deepak Vohra 2016

Deepak VohraPro Docker10.1007/978-1-4842-1830-3_13

13. Using Apache Solr

Deepak Vohra1 

(1)

BC, Canada

Apache Solr is an open source search platform built on Apache Lucene, a text search engine library. Apache Solr is scalable and reliable and provides indexing and querying service. Cloudera Search is based on Apache Solr. In this chapter we shall use the official Docker image for Apache Solr to run Apache Solr in a Docker container. This chapter has the following sections.

Setting the Environment

Starting Docker Container for Apache Solr Server

Starting Interactive Shell

Logging in to the Solr Admin Console

Creating a Core Admin Index

Loading Sample Data

Querying Apache Solr in Solr Admin Console

Querying Apache Solr using REST API Client

Deleting Data

Listing Logs

Stopping Apache Solr Server

Setting the Environment

The following software is required for this chapter.

-Docker Engine (version 1.8)

-Docker image for Apache Solr

We will use an Amazon EC2 instance based on the Ubuntu Server 14.04 LTS (HVM), SSD Volume Type - ami-d05e75b8. Login to the Amazon EC2 instance with the user name “ubuntu” and the public IP address of the Amazon EC2 instance.

ssh -i "docker.pem" ubuntu@54.208.53.110

Ubuntu instance on Amazon EC2 gets logged in to as shown in Figure 13-1.

Figure 13-1.

Logging in to Ubuntu on AmazonEC2

Install Docker on Ubuntu as discussed in Chapter 1. Start the Docker service. If Docker is already started, a message “start: Job is already running: docker” gets output.

sudo service docker start

Docker service status may be output with the following command.

sudo service docker status

A message indicating that a docker process is running gets output as shown in Figure 13-2.

Figure 13-2.

Starting and Finding Docker Service Status

Next, download the official Docker image for Apache Solr with the docker pull command.

sudo docker pull solr

The Docker image gets downloaded as shown in Figure 13-3.

Figure 13-3.

Downloading Docker Image solr

Starting Docker Container for Apache Solr Server

To start Apache Solr server run the docker run command with port specified with –p as 8983. Specify the container name with –name option as “solr_on_docker,“ which is arbitrary. The –d command parameter makes the Docker container run in a detached mode.

sudo docker run -p 8983:8983  -d --name  solr_on_docker  solr

List the running Docker containers with the docker ps command.

sudo docker ps

The Docker container running Apache Solr get listed including the container id assigned to the container as shown in Figure 13-4.

Figure 13-4.

Starting Docker Container for Apache Solr

Run the docker logs command to output the logs for the Docker container. Either the container name or container id may be used in docker commands.

sudo docker logs -f 8061f79d1f16

The container logs indicate that the Apache Solr server has started as shown in Figure 13-5.

Figure 13-5.

Listing Docker Container Log

Starting the Interactive Shell

Start the interactive shell for the Docker container as user “solr.”

sudo docker exec -it –user=solr solr_on_docker bash

The interactive shell (or tty) gets started as shown in Figure 13-6.

Figure 13-6.

Starting TTY

Apache Solr commands may be run in the interactive terminal.

Logging in to the Solr Admin Console

If the Docker container running the Apache Solr server is running on a different host than the Admin Console, use the public DNS name of the Amazon EC2 instance running the Docker engine and the Docker container. Obtain the public DNS from the Amazon EC2 Management Console. The public DNS is ec2-54-208-53-110.compute-1.amazonaws.com as shown in Figure 13-7.

Figure 13-7.

Finding the Public DNS

Use the URL http://ec2-54-208-53-110.compute-1.amazonaws.com:8983/ to access the Apache Solr Admin Console. The Dashboard is shown in Figure 13-8.

Figure 13-8.

Logging in to Solr Admin Console

Creating a Core Index

Next, create a core, an index for the data to be stored in Apache Solr. From the tty run the bin/solr create_core command to create a core called gettingstarted.

bin/solr create_core -c gettingstarted

A new core called “gettingstarted” gets created as shown in Figure 13-9.

Figure 13-9.

Creating a Core called “gettingstarted”

In the Solr Admin Console, select Core Admin as shown in Figure 13-10.

Figure 13-10.

Selecting Core Admin

In the Core Selector, select the gettingstarted core as shown in Figure 13-11.

Figure 13-11.

Selecting the gettingstarted Core

Select Overview tab in the margin as shown in Figure 13-12. The index stats get listed such as the version, Num Docs, Max Doc, and Deleted.

Figure 13-12.

Displaying the Overview of the gettingstarted Core

Loading Sample Data

Apache Solr supports indexing of documents in XML, JSON and CSV formats. We shall index using the XML format. The root element is required to be <add/> and each document must be enclosed in the <doc/> element. The id field is required. We shall index the following XML format document. Store the document as solr.xml.

<add>

<doc>

  <field name="id">SOLR1000</field>

  <field name="name">Solr, the Enterprise Search Server</field>

  <field name="manu">Apache Software Foundation</field>

  <field name="cat">software</field>

  <field name="cat">search</field>

  <field name="features">Advanced Full-Text Search Capabilities using Lucene</field>

  <field name="features">Optimized for High Volume Web Traffic</field>

  <field name="features">Standards Based Open Interfaces - XML and HTTP</field>

  <field name="features">Comprehensive HTML Administration Interfaces</field>

  <field name="features">Scalability - Efficient Replication to other Solr Search Servers</field>

  <field name="features">Flexible and Adaptable with XML configuration and Schema</field>

  <field name="features">Good unicode support: héllo (hello with an accent over the e)</field>

  <field name="price">0</field>

  <field name="popularity">10</field>

  <field name="inStock">true</field>

  <field name="incubationdate_dt">2006-01-17T00:00:00.000Z</field>

</doc>

</add>

Copy the solr.xml to the /opt/solr directory in the Docker container. Run the following docker cp command from the Ubuntu host, not the Docker container, to copy the solr.xml document to the Docker container with id 8061f79d1f16, which is running the Apache Solr server. The container id may be obtained from the output of the docker ps command.

sudo docker cp solr.xml 8061f79d1f16:/opt/solr/solr.xml

The solr.xml document gets copied to the /opt/solr directory in the Docker container as shown in Figure 13-13.

Figure 13-13.

Copying solr.xml to DockerContainer

Start the interactive terminal (tty) with the following command.

sudo docker exec -it –user=solr solr_on_docker bash

From the /opt/solr directory run the following command to list the files and directories in the directory. The solr.xml should get listed as shown in Figure 13-14.

Figure 13-14.

Listing the solr.xml File in Docker Container

Run the following command to post the solr.xml to the gettingstarted index.

bin/post -c gettingstarted ./solr.xml

The solr.xml file gets indexed as shown in Figure 13-15.

Figure 13-15.

indexing solr.xml

Querying Apache Solr in Solr Admin Console

The indexed document may be queried from the Solr Admin console. Select the Query tab as shown in Figure 13-16.

Figure 13-16.

Selecting the Query tab

The Request-Handler (qt) should be set to /select and the query should be set to *.* to select all documents in the index as shown in Figure 13-17. The start index is set to 0 and the number of rows to select is set to 10. The wt (response writer) is set to json to return the queried documents in JSON format. Other supported formats are XML and CSV.

Figure 13-17.

The /select Request Handler

Click on Execute Query as shown in Figure 13-18.

Figure 13-18.

Clicking on Execute Query

The query result gets returned as JSON as shown in Figure 13-19.

Figure 13-19.

JSON Response from Query

The version field gets added to the JSON document returned as shown in Figure 13-20.

Figure 13-20.

The _version_ field added automatically

Querying Apache Solr using REST API Client

The Apache Solr indexed documents may also be accessed using the REST client such as curl. For example, query all the documents in the gettingstarted index using the following curl command run from the interactive terminal for the “solr” container.

curl http://ec2-54-208-53-110.compute-1.amazonaws.com:8983/solr/gettingstarted/select?q=*%3A*&wt=json&indent=true

All the documents indexed in the gettingstarted index get output as shown in Figure 13-21.

Figure 13-21.

Running a REST Client Query

As another example, query all documents with “Lucene” in the document.

curl " http://ec2-54-208-53-110.compute-1.amazonaws.com:8983/solr/gettingstarted/select?wt=json&indent=true&q=Lucene "

As the single document indexed has “Lucene” in it the document gets returned as shown in Figure 13-22.

Figure 13-22.

Running a REST Client Query using term ‘Lucene’

To query for a document with text in a specific field use the field=text format in the q parameter. For example, search for all documents with “Lucene” in the “name” field.

curl " http://ec2-54-208-53-110.compute-1.amazonaws.com:8983/solr/gettingstarted/select?wt=json&indent=true&q=name:Lucene "

As the name field of the single document in the index does not include “Lucene” no document gets returned as shown in Figure 13-23.

Figure 13-23.

Running a REST Client Query with “Lucene” in “name” Field

A phrase search may also be performed using the REST client. For example search for the phrase “Enterprise Search”.

curl " http://ec2-54-208-53-110.compute-1.amazonaws.com:8983/solr/gettingstarted/select?wt=json&indent=true&q=\"Enterprise+Search \""

As the single document has ‘Enterprise Search’ in it, the document gets returned as shown in Figure 13-24.

Figure 13-24.

Running a REST Query using a Phrase

Deleting Data

To delete a document run the same tool, the post tool, as used to post a document. Specify the document id to delete using the XML <delete><id></id></delete>. The index to delete from is specified with the –c option.

bin/post -c gettingstarted -d "<delete><id>SOLR1000</id></delete>"

The single document indexed, which has the id SOLR1000, gets deleted as shown in Figure 13-25.

Figure 13-25.

Deleting a Single Document

Subsequently, run the same curl command as run before to search for all documents.

curl http://ec2-54-208-53-110.compute-1.amazonaws.com:8983/solr/gettingstarted/select?q=*%3A*&wt=json&indent=true

No document gets found as shown in Figure 13-26 as the only document indexed has been deleted.

Figure 13-26.

REST Query does not list any Document after deleting the only document

Run a query in the Solr Admin Console after deleting the only indexed document and no document gets returned as indicated by numFound field value of 0 in the JSON document returned as shown in Figure 13-27.

Figure 13-27.

Query in Sole Admin Console does not list any document after Deleting the only Document

Listing Logs

The Docker container logs for all commands run on the Apache Solr server may be output using the docker logs command.

sudo docker logs -f solr_on_docker

The Docker container logs get output as shown in Figure 13-28.

Figure 13-28.

Listing Docker Container Logs

Stopping Apache Solr Server

The running Docker containers may be listed with the docker ps command. The solr_on_docker container is listed as running as shown in Figure 13-29.

Figure 13-29.

Listing Running Docker Containers

To stop the solr_on_docker container run the docker stop command as shown in Figure 13-30.

sudo docker stop solr_on_docker

Run the docker ps command to list the running Docker containers again. The solr_on_docker container does not get listed.

Figure 13-30.

Stopping Docker Container for Apache Solr

The Docker image still gets listed with the docker images command as shown in Figure 13-31.

Figure 13-31.

Listing Docker Image for a stopped Docker Container

If the Docker image is to be removed, first the Docker container solr_on_docker has to be removed after being stopped.

sudo docker rm solr_on_docker

sudo docker rm solr

Summary

In this chapter we used the official Docker image for Apache Solr to run the Apache Solr server in a Docker container. We created a core index and posted a document to the index. Subsequently, we queried the document from the Solr Admin Console and also the REST client tool curl. In the next chapter we shall discuss Apache Spark with Docker.

© Deepak Vohra 2016

Deepak VohraPro Docker10.1007/978-1-4842-1830-3_14

14. Using Apache Spark

Deepak Vohra1 

(1)

BC, Canada

Apache Spark is a data processing engine for large data sets. Apache Spark is much faster (up to 100 times faster in memory) than Apache Hadoop MapReduce. In cluster mode, Spark applications run as independent processes coordinated by the SparkContext object in the driver program, which is the main program. The SparkContext may connect to several types of cluster managers to allocate resources to Spark applications. The supported cluster managers include the Standalone cluster manager, Mesos and YARN. Apache Spark is designed to access data from varied data sources including the HDFS, Apache HBase and NoSQL databases such as Apache Cassandra and MongoDB. In this chapter we shall use the same CDH Docker image that we used for several of the Apache Hadoop frameworks including Apache Hive and Apache HBase. We shall run an Apache Spark Master in cluster mode using the YARN cluster manager in a Docker container.

Setting the Environment

Running the Docker Container for CDH

Running Apache Spark Job in yarn-cluster Mode

Running Apache Spark Job in yarn-client Mode

Running the Apache Spark Shell

Setting the Environment

The following software is required for this chapter.

-Docker Engine (version 1.8)

-Docker image for Apache Spark

Connect to an Amazon EC2 instance using the public IP address for the instance. The public IP address may be found from the Amazon EC2 Console as explained in Appendix A.

ssh -i "docker.pem" ec2-user@54.208.146.254

Start the Docker service and verify status as started.

sudo service docker start

sudo service docker status

Download the Docker image for CDH, the svds/cdh image if not already downloaded for an earlier chapter.

sudo docker pull svds/cdh

Docker image svds/cdh gets downloaded as shown in Figure 14-1.

Figure 14-1.

Downloading svds/cdh Docker Image

Running the Docker Container for CDH

Start a Docker container for the CDH frameworks using the Apache Spark Master port as 8088.

sudo docker run  -p 8088 -d --name cdh svds/cdh

List the running Docker containers.

sudo docker ps

CDH processes including Apache Spark get started and the container cdh gets listed as running as shown in Figure 14-2.

Figure 14-2.

Starting Docker Container for CDH including Apache Spark

Start an interactive terminal for the cdh container.

sudo docker exec -it cdh bash

The interactive terminal gets started as shown in Figure 14-3.

Figure 14-3.

Starting the TTY

In YARN mode, a Spark application may be submitted to a cluster in yarn-cluster mode or yarn-client mode. In the yarn-cluster mode, the Apache Spark driver runs inside an Application Master, which is managed by the YARN. In yarn-client mode. The Spark driver runs in the client process outside of YARN and the Application Master is used only for requesting resources from YARN. The --master parameter is yarn-cluster or yarn-client based on the mode of application submission. In yarn-client mode the Spark driver logs to the console.

We shall run a Spark application using each of the application submission modes. We shall use the example application org.apache.spark.examples.SparkPi.

Running Apache Spark Job in yarn-cluster Mode

To submit the Spark application SparkPi in yarn-cluster mode using 1000 iterations, run the following spark-submit command with the --master parameter as yarn-cluster.

spark-submit --master yarn-cluster --class org.apache.spark.examples.SparkPi /usr/lib/spark/examples/lib/spark-examples-1.3.0-cdh5.4.7-hadoop2.6.0-cdh5.4.7.jar 1000

The preceding command is run from the interactive terminal as shown in Figure 14-4.

Figure 14-4.

Submitting the Spark Application in yarn-cluster Mode

The output from the Spark application is shown in Figure 14-5.

Figure 14-5.

Output from Spark Job in yarn-cluster Mode

A more detailed output from the spark-submit command is listed:

spark-submit --master yarn-cluster --class org.apache.spark.examples.SparkPi /usr/lib/spark/examples/lib/spark-examples-1.3.0-cdh5.4.7-hadoop2.6.0-cdh5.4.7.jar 1000

15/10/23 19:12:52 WARN util.NativeCodeLoader: Unable to load native-hadoop library for your platform... using builtin-java classes where applicable

15/10/23 19:12:54 INFO client.RMProxy: Connecting to ResourceManager at /0.0.0.0:8032

15/10/23 19:12:56 INFO yarn.Client: Requesting a new application from cluster with 1 NodeManagers

15/10/23 19:12:56 INFO yarn.Client: Verifying our application has not requested more than the maximum memory capability of the cluster (8192 MB per container)

15/10/23 19:12:56 INFO yarn.Client: Will allocate AM container, with 896 MB memory including 384 MB overhead

15/10/23 19:12:56 INFO yarn.Client: Setting up container launch context for our AM

15/10/23 19:12:56 INFO yarn.Client: Preparing resources for our AM container

15/10/23 19:12:59 WARN shortcircuit.DomainSocketFactory: The short-circuit local reads feature cannot be used because libhadoop cannot be loaded.

15/10/23 19:12:59 INFO yarn.Client: Uploading resource file:/usr/lib/spark/lib/spark-assembly-1.3.0-cdh5.4.7-hadoop2.6.0-cdh5.4.7.jar -> hdfs://localhost:8020/user/root/.sparkStaging/application_1445627521793_0001/spark-assembly-1.3.0-cdh5.4.7-hadoop2.6.0-cdh5.4.7.jar

15/10/23 19:13:05 INFO yarn.Client: Uploading resource file:/usr/lib/spark/examples/lib/spark-examples-1.3.0-cdh5.4.7-hadoop2.6.0-cdh5.4.7.jar -> hdfs://localhost:8020/user/root/.sparkStaging/application_1445627521793_0001/spark-examples-1.3.0-cdh5.4.7-hadoop2.6.0-cdh5.4.7.jar

15/10/23 19:13:06 INFO yarn.Client: Setting up the launch environment for our AM container

15/10/23 19:13:07 INFO spark.SecurityManager: Changing view acls to: root

15/10/23 19:13:07 INFO spark.SecurityManager: Changing modify acls to: root

15/10/23 19:13:07 INFO spark.SecurityManager: SecurityManager: authentication disabled; ui acls disabled; users with view permissions: Set(root); users with modify permissions: Set(root)

15/10/23 19:13:07 INFO yarn.Client: Submitting application 1 to ResourceManager

15/10/23 19:13:08 INFO impl.YarnClientImpl: Submitted application application_1445627521793_0001

15/10/23 19:13:09 INFO yarn.Client: Application report for application_1445627521793_0001 (state: ACCEPTED)

15/10/23 19:13:09 INFO yarn.Client:

         client token: N/A

         diagnostics: N/A

         ApplicationMaster host: N/A

         ApplicationMaster RPC port: -1

         queue: root.root

         start time: 1445627587658

         final status: UNDEFINED

         tracking URL: http://4b4780802318:8088/proxy/application_1445627521793_0001/

         user: root

15/10/23 19:13:10 INFO yarn.Client: Application report for application_1445627521793_0001 (state: ACCEPTED)

15/10/23 19:13:11 INFO yarn.Client: Application report for application_1445627521793_0001 (state: ACCEPTED)

15/10/23 19:13:24 INFO yarn.Client: Application report for application_1445627521793_0001 (state: RUNNING)

15/10/23 19:13:24 INFO yarn.Client:

         client token: N/A

         diagnostics: N/A

         ApplicationMaster host: 4b4780802318

         ApplicationMaster RPC port: 0

         queue: root.root

         start time: 1445627587658

         final status: UNDEFINED

         tracking URL: http://4b4780802318:8088/proxy/application_1445627521793_0001/

         user: root

15/10/23 19:13:25 INFO yarn.Client: Application report for application_1445627521793_0001 (state: RUNNING)

15/10/23 19:13:26 INFO yarn.Client: Application report for

15/10/23 19:13:51 INFO yarn.Client: Application report for application_1445627521793_0001 (state: FINISHED)

15/10/23 19:13:51 INFO yarn.Client:

         client token: N/A

         diagnostics: N/A

         ApplicationMaster host: 4b4780802318

         ApplicationMaster RPC port: 0

         queue: root.root

         start time: 1445627587658

         final status: SUCCEEDED

         tracking URL: http://4b4780802318:8088/proxy/application_1445627521793_0001/A

         user: root

In yarn-cluster mode, the Spark application result is not output to the console and has to be accessed from the YARN container logs accessible from the ResourceManager using the tracking URL http://4b4780802318:8088/proxy/application_1445627521793_0001/A in a browser if the final status is SUCCEEDED.

Running Apache Spark Job in yarn-client Mode

To submit the Spark application SparkPi in yarn-client mode using 1000 iterations, run the following spark-submit command with the --master parameter as yarn-client.

spark-submit

     --master yarn-client

     --class org.apache.spark.examples.SparkPi

      /usr/lib/spark/examples/lib/spark-examples-1.3.0-cdh5.4.7-hadoop2.6.0-cdh5.4.7.jar

      1000

The output from the spark-submit command is shown in Figure 14-6.

Figure 14-6.

Submitting Spark Application in yarn-client Mode

A more detailed output from the Apache Spark application is as follows and includes the value of Pi calculated approximately.

spark-submit --master yarn-client --class org.apache.spark.examples.SparkPi /usr/lib/spark/examples/lib/spark-examples-1.3.0-cdh5.4.7-hadoop2.6.0-cdh5.4.7.jar 1000

15/10/23 19:15:19 INFO spark.SparkContext: Running Spark version 1.3.0

15/10/23 19:15:43 INFO cluster.YarnScheduler: Adding task set 0.0 with 1000 tasks

15/10/23 19:15:43 INFO scheduler.TaskSetManager: Starting task 0.0 in stage 0.0 (TID 0, 4b4780802318, PROCESS_LOCAL, 1353 bytes)

15/10/23 19:15:43 INFO scheduler.TaskSetManager: Starting task 1.0 in stage 0.0 (TID 1, 4b4780802318, PROCESS_LOCAL, 1353 bytes)

15/10/23 19:15:57 INFO scheduler.TaskSetManager: Finished task 999.0 in stage 0.0 (TID 999) in 22 ms on 4b4780802318 (999/1000)

15/10/23 19:15:57 INFO scheduler.TaskSetManager: Finished task 998.0 in stage 0.0 (TID 998) in 28 ms on 4b4780802318 (1000/1000)

15/10/23 19:15:57 INFO cluster.YarnScheduler: Removed TaskSet 0.0, whose tasks have all completed, from pool

15/10/23 19:15:57 INFO scheduler.DAGScheduler: Stage 0 (reduce at SparkPi.scala:35) finished in 14.758 s

15/10/23 19:15:57 INFO scheduler.DAGScheduler: Job 0 finished: reduce at SparkPi.scala:35, took 15.221643 s

Pi is roughly 3.14152984

Running the Apache Spark Shell

The Apache Spark shell is started in yarn-client mode as follows.

spark-shell --master yarn-client

The scala> command prompt gets displayed as shown in Figure 14-7. A Spark context gets created and becomes available as ‘sc’. A SQL context also becomes available as 'sqlContext'.

Figure 14-7.

The scala> Command Prompt

A more detailed output from the spark-shell command is as follows.

root@4b4780802318:/# spark-shell --master yarn-client

15/10/23 19:17:16 WARN util.NativeCodeLoader: Unable to load native-hadoop library for your platform... using builtin-java classes where applicable

15/10/23 19:17:16 INFO spark.SecurityManager: Changing view acls to: root

15/10/23 19:17:16 INFO spark.SecurityManager: Changing modify acls to: root

15/10/23 19:17:16 INFO spark.SecurityManager: SecurityManager: authentication disabled; ui acls disabled; users with view permissions: Set(root); users with modify permissions: Set(root)

15/10/23 19:17:16 INFO spark.HttpServer: Starting HTTP Server

15/10/23 19:17:16 INFO server.Server: jetty-8.y.z-SNAPSHOT

15/10/23 19:17:16 INFO server.AbstractConnector: Started SocketConnector@0.0.0.0:56899

15/10/23 19:17:16 INFO util.Utils: Successfully started service 'HTTP class server' on port 56899.

Welcome to

      ____              __

     / __/__  ___ _____/ /__

    _\ \/ _ \/ _ `/ __/  '_/

   /___/ .__/\_,_/_/ /_/\_\   version 1.3.0

      /_/

Using Scala version 2.10.4 (OpenJDK 64-Bit Server VM, Java 1.7.0_79)

Type in expressions to have them evaluated.

Type :help for more information.

15/10/23 19:17:22 INFO spark.SparkContext: Running Spark version 1.3.0

15/10/23 19:17:45 INFO repl.SparkILoop: Created spark context..

Spark context available as sc.

15/10/23 19:17:45 INFO repl.SparkILoop: Created sql context (with Hive support)..

SQL context available as sqlContext.

15/10/23 19:17:45 INFO storage.BlockManagerMasterActor: Registering block manager 4b4780802318:48279 with 530.3 MB RAM, BlockManagerId(2, 4b4780802318, 48279)

scala>

Run the following Scala script consisting of a HelloWorld module in the Spark shell for a Hello World program.

object HelloWorld {

    def main(args: Array[String]) {

      println("Hello, world!")

    }

  }

HelloWorld.main(null)

The output from the Scala script is shown in Figure 14-8.

Figure 14-8.

Output from Scala Script

Summary

In this chapter, we ran Apache Spark applications on a YARN cluster in a Docker container using the spark-submit command. We submitted the example application in yarn-cluster and yarn-client modes. We also ran a HelloWorld Scala script in a Spark shell.

This chapter concludes the book on Docker. In addition to running some of the commonly used software on Docker, we discussed the main Docker administrative tasks such as installing Docker, downloading a Docker image, creating and running a Docker container, starting an interactive shell, running commands in an interactive shell, listing Docker containers, listing Docker container logs, stopping a Docker container, and removing a Docker container and a Docker image. Only a few of the software applications could be discussed in the scope of this book. Several more Docker images are available on the Docker hub at https://hub.docker.com/ .

© Deepak Vohra 2016

Deepak VohraPro Docker10.1007/978-1-4842-1830-3_15

Using the Amazon EC2

Deepak Vohra1 

(1)

BC, Canada

Amazon Web Services (AWS) provides various services and Amazon Elastic Compute Cloud (Amazon EC2) is one of the services. Amazon EC2 may be used to create a virtual host server. Amazon EC2 provides a wide selection of instance AMIs (Amazon Machine Images) to choose from when creating a virtual server. In this Appendix we shall discuss creating and configuring Amazon EC2 instance/s for installing Docker and Docker images. Amazon EC2 instance is not a requirement to run Docker software and an alternative platform, local or remote, may be used instead.

Creating an Amazon EC2 Instance

Create a Key Pair

Starting an Amazon EC2 Instance

Connecting to an Amazon EC2 Instance

Finding the Public IP Address

Finding the Public DNS

Adding the default Security Group

Stopping an Amazon EC2 Instance

Changing the Instance Type

Creating an Amazon EC2 Instance

We have used Amazon EC2 instances based on Linux for deploying Docker and Docker images. Amazon EC2 is not a requirement and an alternative such as a local Linux installation may be used instead. The Linux platform is required to support 64 bit software. We have made use of two different 64 bit (required) AMIs:

1.

Ubuntu Server 14.04 LTS (HVM), SSD Volume Type - ami-d05e75b8 64 bit

2.

Red Hat Enterprise Linux version 7.1 (HVM), EBS General Purpose (SSD) Volume Type (ami-12663b7a) 64 bit

To create an Amazon EC2 Instance, an Amazon Web Services Account is required, which may be created at https://aws.amazon.com/getting-started/?nc2=h_l2_cc . To create an Amazon EC2 instance, navigate to https://aws.amazon.com/ec2/ and click on Sign In to the Console. Select EC2 from the listed Amazon Web Services. Click on INSTANCES ➤ Instances to list the Amazon EC2 instances already created in the account. Click on Launch Instance to create a new Amazon EC2 instance as shown in Figure A-1.

Figure A-1.

Launching an Amazon EC2 Instance

Select an AMI to create a virtual server from. Some of the AMIs are eligible for the Free tier. For example, select the Ubuntu AMI as shown in Figure A-2.

Figure A-2.

Selecting an AMI

In Choose an Instance Type different types are available differing by features such as supported capacity and virtual CPUs (vCPUs). Select one of the Instance Types, for example the General Purpose ➤ t2.micro and click on Review and Launch as shown in Figure A-3.

Figure A-3.

Review and Launch

Click on Launch in Review Instance Launch as shown in Figure A-4.

Figure A-4.

Launch

A dialog gets displayed to create or select an existing key pair. A key pair is required for authorization. To create a new key pair, select the “Create a new key pair” option as shown in Figure A-5.

Figure A-5.

Selecting “Create a new key pair”

Specify a Key pair name and click on Download Key Pair as shown in Figure A-6. The Key pair gets created and downloaded. The key pair selected for an Amazon EC2 instance when creating the instance is required when connecting to the instance, as is discussed later in this Appendix.

Figure A-6.

Download Key Pair

Alternatively, select the option “Choose an existing key pair” and click on Launch Instances as shown in Figure A-7.

Figure A-7.

Choose an existing Key Pair

The Launch Status gets displayed. Click on the instance id to display the instance as shown in Figure A-8.

Figure A-8.

Launch Status

The instance gets listed and is initially in the “pending” state as shown in Figure A-9.

Figure A-9.

Amazon EC2 Instance in Pending State

When an instance has launched completely, the Instance State becomes “running” as shown in Figure A-10.

Figure A-10.

Running Instance

Creating a Key Pair

As mentioned previously, a key pair is required to connect to a Amazon EC2 instance. A key pair may be created while creating an instance or separately. To create a key pair separately select Network & Security ➤ Key Pairs as shown in Figure A-11.

Figure A-11.

Network & Security ➤ Key Pairs

The key pairs already created get listed. A key pair may be deleted by selecting the key pair and clicking on Delete. Click on Yes in the dialog as shown in Figure A-12.

Figure A-12.

Delete Key Pair

To create a new key pair, click on Create Key Pair as shown in Figure A-13.

Figure A-13.

Create Key Pair

Specify a Key pair name and click on Create button as shown in Figure A-14.

Figure A-14.

Create Button

A new key pair gets created as shown in Figure A-15.

Figure A-15.

New Key Pair

Starting an Amazon EC2 Instance

When a new Amazon EC2 instance is created and Launch is selected, the instance gets started. A stopped instance may be started by selecting the checkbox adjacent to the instance and selecting Actions ➤ Instance State ➤ Start as shown in Figure A-16.

Figure A-16.

Actions ➤ Instance State ➤ Start

In Start Instances dialog click on Yes, Start as shown in Figure A-17.

Figure A-17.

Starting an instance

Connecting to an Amazon EC2 Instance

An instance that has been started may be connected to from a local machine such as a local Linux instance without as much RAM and a different Linux distribution than the instance being connected to. The ssh command to use to connect to a running instance may be obtained by clicking on Connect as shown in Figure A-18.

Figure A-18.

Connect

In the Connect To Your Instance dialog, the ssh command is displayed. The “docker.pem” is the key pair used to create an instance and also downloaded to the local instance from which the Amazon EC2 instance is to be connected. The username for an Ubuntu instance is “ubuntu” as shown in Figure A-19 and for a Red Hat instance is “ec2-user”.

Figure A-19.

Connect To Your Instance dialog

The IP Address shown in the ssh command is the Public IP Address of the Amazon EC2 instance.

Finding the Public IP Address

The Public IP Address may also be obtained from the EC2 Console as shown in Figure A-20.

Figure A-20.

Public IP Address

Finding the Public DNS

To connect to an Amazon EC2 instance process such as the HelloWorld application in Chapter 1 from a remote browser, the Public DNS is required. The Public DNS may also be obtained from the EC2 Management Console as shown in Figure A-21.

Figure A-21.

Public DNS

The Public DNS may not get displayed initially. To display the Public DNS, select Services ➤ VPC in the EC2 Management Console as shown in Figure A-22. VPC is a virtual private cloud assigned to a user.

Figure A-22.

Services ➤ VPC

In the VPC Dashboard, select Your VPCs as shown in Figure A-23.

Figure A-23.

Your VPCs

Select the VPC listed as shown in Figure A-24.

Figure A-24.

Selecting the VPC

From Actions, select Edit DNS Hostnames as shown in Figure A-25.

Figure A-25.

Edit DNS Hostnames

In the Edit DNS Hostnames dialog, select Yes for the DNS Hostnames, and click on Save as shown in Figure A-26.

Figure A-26.

Edit DNS Hostnames Dialog

Adding the default Security Group

To be able to connect from a remote browser, the Inbound and Outbound rules are required to be set to allow all traffic using any protocol on all ports in the range 0-65535 from any source. The “default” security group is configured by default to allow all traffic. We need to assign the “default” security group to the Amazon EC2 instance running Docker. Select the instance and select Actions ➤ Networking ➤ Change Security Groups as shown in Figure A-27.

Figure A-27.

Actions ➤ Networking ➤ Change Security Groups

In the Change Security Groups panel, the “default” group might not be selected as shown in Figure A-28.

Figure A-28.

The “default” group not selected

Select the checkbox for the “default” security group and click on Assign Security Groups as shown in Figure A-29.

Figure A-29.

Assign Security Groups

The default security group gets assigned to the Amazon EC2 instance. To find the available security groups and their inbound/outbound rules, click on Network & Security ➤ Security Groups as shown in Figure A-30.

Figure A-30.

Network & Security ➤ Security Groups

The “default” security group should be listed. Select the “default” group. Select the Inbound tab. The Type should be listed as “All Traffic”, the Protocol as “All”, the Port Range as All and Source as 0.0.0.0. To edit the inbound rules, click on Inbound ➤ Edit as shown in Figure A-31.

Figure A-31.

Inbound ➤ Edit

The inbound rules get displayed and should be kept as the default settings as shown in Figure A-32. Click on Save.

Figure A-32.

Edit inbound rules dialog

Similarly, select the Outbound tab. The Type should be listed as “All Traffic”, the Protocol as “All”, the Port Range as All and Destination as 0.0.0.0. Click on Edit as shown in Figure A-33.

Figure A-33.

Outbound ➤ Edit

The default settings for the Outbound rules get displayed and should be kept as the default as shown in Figure A-34. Click on Save.

Figure A-34.

Edit outbound rules dialog

The security groups assigned to an instance are listed in the Security Groups column as shown in Figure A-35.

Figure A-35.

Security Groups column

Stopping an Amazon EC2 Instance

To stop an Amazon EC2 instance select the instance and select Actions ➤ Instance State ➤ Stop as shown in Figure A-36.

Figure A-36.

Actions ➤ Instance State ➤ Stop

Multiple instances may be selected and stopped together as shown in Figure A-37.

Figure A-37.

Stopping Multiple Instances

In the Stop Instance dialog, click on Yes, Stop as shown in Figure A-38.

Figure 38.

Stop Instance dialog

The instance/s get stopped.

Changing the Instance Type

To increase or decrease the capacity of an instance, it may be required to change the instance type, such as from a micro instance to a medium instance. An instance must first be stopped before changing its type and later restarted after modifying the type. To change the instance type, select the instance and select Actions ➤ Instance Settings ➤ Change Instance Type as shown in Figure A-39.

Figure 39.

Actions ➤ Instance Settings ➤ Change Instance Type

In the Change Instance Type dialog, select the Instance Type to apply, for example, m3.medium as shown in Figure A-40.

Figure A-40.

Change Instance Type dialog

Click on Apply as shown in Figure A-41.

Figure A-41.

Applying a new Instance Type

The instance type gets upgraded to m3.medium as shown in Figure A-42. Keep in consideration that upgrading an instance type could make the instance not eligible for the free tier.

Figure A-42.

Upgraded Instance Type

Summary

In Appendix A we discussed creating an Amazon EC2 instance based on an AMI, starting an instance, connecting to an instance, finding the Public IP Address, finding the Public DNS, changing the instance type and stopping an instance.

Index

A, B

Amazon EC2 instance

apply instance type

64 bits

change instance type

creation

keypair

launch status

pending state

review and launch

running instance

Ubuntu AMI

default security group

DNS Hostnames dialog

inbound rules

key pair

creation

delete

network and security

network security

outbound rules

Public DNS

Public IP Address

security groups

ssh command

start instances

stop command

Ubuntu instance

upgrade instance type

VPC Dashboard

Amazon EC2 instances

Linux architecture

public IP address

RHEL instance

Ubuntu AMI

Ubuntu instance

Amazon Elastic Compute Cloud (Amazon EC2)

Amazon Machine Images (AMIs)

Apache Cassandra

CQL shell

detached mode

Docker containers

environment settings

exit command

interactive terminal (tty)

keyspace

alter statement

creation

USE statement

multiple instances

overview

stop command

table

creation

DELETE statement

DROP COLUMN FAMILY statement

DROP KEYSPACE statement

INSERT DML statement

SELECT statement

TRUNCATE statement

Apache Hadoop

CDH framework

configuration files

HDFS commands

environment settings

image sequenceiq/hadoop-docker

interactive shell (tty)

MapReduce Word Count application

HADOOP_PREFIX Directory

HDFS directory

output

wq command

YARN framework

overview

pull command

run command

sequenceiq/hadoop-docker image

stop command

Apache HBase

Docker container

environment settings

interactive terminal (tty)

shell command

tables

creation

get command

lists

scan command

stop command

Apache Hive

Beeline CLI

cdh process

!connect command

environment settings

HIveServer2

load data

overview

query

table creation

use default command

Apache Kafka

consumer console

docker image

environment settings

IP address

logs command

messages

overview

producer console

run command

sh–create command

stop command

Apache Solr

admin console login

Amazon EC2 instance

core index creation

delete command

docker container

interactive shell

logs command

pull command

query tab

execute query

JSON Response

Request-Handler

version field

REST API client

service status

stop command

XML format document

Apache Spark

CDH frameworks

environment settings

scala> command

shell command

yarn-client mode

yarn-cluster mode

Apache Sqoop

cdh and mysqldb containers

core-site.xml configuration

data transfer paths

environment settings

HDFS

command parameters

listed data

sqoop codegen command

sqoop help command

sqoop import command

hdfs-site.xml configuration

INSERT SQL statements

interactive terminals (tty)

JAVA_HOME environment

MapReduce framework

MySQL CLI

MySQL JDBC jar

preceding commands

privileges settings

remove command

run command

SELECT statement

SQL query

sqoop export command

stop command

table creation

variables

wlslog

WLSLOG_COPY table

wlslog.jar file

Apache ZooKeeper

C

Cloudera Hadoop distribution (CDH)

command-line interface tools (CLI)

Couchbase Server

add documents

JSON Document

CLI tools

cluster configuration

buckets section

default buckets

disk storage section

flush, enable

IP Address

notifications

overview tab

RAM configuration

servers summary

username and password

Docker image

document creation

environment settings

exit command

interactive terminal (tty)

logs command

Ubuntu Server AMI

unlimit settings

Web Console

admin

login

D, E, F, G, H, I, J, K

Docker

Amazon EC2 instances

Linux architecture

public DNS

public IP address

RHEL instance

Ubuntu AMI

Ubuntu instance

container

listing port

list running

stop command

containerremove command

curl tool

find status

Hello word application

image download

installation

overview

Red Hat

installation

updated service

rmi command

run command

stop command

systemctl

Ubuntu version

uninstallation

L

Linux

container

attached mode

detached mode

inspect command

lists

top command

create command

environment settings

image download

image list

interactive shell

exit command

files and directories

Oracle Server

–i and–t options

remove command

stop command

M, N

MongoDB

backup data

restore database

test database

batch of documents

collection

database creation

Docker container

document creation

drop() method

environment settings

exit command

find() method

findOne() method

insert () method

interactive terminal

JSON format

remove documents

save() method

shell command

stop command

MySQL database

CLI shell

command parameters

data directory

default database

environment settings

exit command

INSERT statement

listing commands

login command

logs command

overview

password

run command

SELECT statement

stop command

table creation

use command

O, P, Q, R, S, T, U, V, W, X, Y, Z

Oracle Database

container logs

environment settings

orcldb container

remove command

SQL*Plus

table creation

user creation